Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCTM waste pullout mounts from the top of a face-frame base cabinet to keep a 35-quart bin tucked out of sight and rolling out on demand, in a narrow 12-inch cabinet opening.
The top-mount configuration is the right call when the cabinet floor is occupied or when sink plumbing limits where a standard bottom-mount carriage can attach. Because this unit hangs from the top of the opening, it clears the base and leaves the cabinet floor free. That makes it a natural fit for sink-base cabinets and other runs where plumbing or floor-level obstructions rule out a floor-mounted carriage. The 12-inch minimum opening width and 22-3/4-inch minimum depth are the two critical fit dimensions to confirm before ordering.
The carriage is Maple, a finish that reads warmly against natural wood interiors and blends with face-frame cabinetry in a kitchen or utility run. The included bin is white and holds 35 quarts, which is a practical everyday size for a single-bin trash station. Full-extension slides draw the bin fully out of the cabinet so nothing at the bottom is out of reach, and the 150-pound capacity means the unit handles a heavy, full bag without hesitation. The door-mount bracket ties the carriage to the cabinet door, so opening the door and pulling the bin are one motion.
Cabinet shops building face-frame kitchen runs will find this a clean solution for a narrow 12-inch base, especially where a floor-mount alternative is not feasible. Designers specifying a single-bin station for a compact kitchen or a wet bar will appreciate that the maple finish works with stained wood interiors. Homeowners replacing an existing top-mount unit in a 12-inch opening can drop this in as a direct-fit solution. If the project calls for a second bin for recycling, or if the cabinet opening is wider, step up to a two-bin or wider-carriage SKU in this family.
The minimum cabinet opening is 12 inches wide, 18-11/32 inches tall, and 22-3/4 inches deep. All three dimensions need to be met for the unit to fit and function correctly.
Top-mount attaches to the top rail of the cabinet opening, leaving the floor clear. It is especially useful in sink-base cabinets where plumbing sits at or near the floor and a bottom-mount carriage would conflict with the supply lines or drain.
One 35-quart white bin is included with this SKU. Replacement bins, lids, and door-mount kits are sold separately.
This unit is designed for face-frame cabinet construction. For a frameless cabinet, check the frameless-specific SKUs in the 4WCTM family.
This pullout keeps a 35-quart bin behind the cabinet door in a narrow 12-inch face-frame opening, with a top-mount design that works where the floor is off-limits and a maple frame that fits naturally into a wood cabinet interior.
Sold In: 1 Each
