Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCTM pullout houses two 35 quart white bins inside a maple carriage that rides on full-extension slides, putting a pair of covered waste containers behind a cabinet door in a 17-3/4 inch face-frame base cabinet.
Keeping separate bins for waste and recycling usually means two cabinet openings or an awkward floor arrangement. This pullout solves that by fitting two 35 quart bins into a single base cabinet run. Both bins roll out together on one carriage, so emptying either one does not require pulling a cabinet apart. The top-mount configuration hangs the bins from the carriage frame rather than resting them on the cabinet floor, which keeps the base clear and makes the bins easier to lift out when it is time to take the bags out.
The carriage is built in maple, a neutral, light-toned wood that sits comfortably inside most painted or natural cabinet interiors without drawing attention to the hardware. The two bins are white, a clean, practical finish that makes it easy to see when a liner needs replacing. Standard full-extension slides handle the travel and carry the combined load of two full bins up to 150 pounds total, keeping the motion steady under real working weight.
This unit is sized for a wider base cabinet in a face-frame kitchen where a single-bin pullout would leave usable space on the table. It fits a minimum cabinet opening of 17-3/4 inches wide, 18-11/32 inches tall, and 22-3/4 inches deep, so measure the clear interior before ordering. The door-mount hardware lets it run off the cabinet door, which is the cleaner install in most kitchen layouts. Cabinet shops building face-frame kitchens and contractors fitting out a kitchen remodel will find this a practical choice for the dedicated waste cabinet in a wider run.
The minimum opening required is 17-3/4 inches wide, 18-11/32 inches tall, and 22-3/4 inches deep in a face-frame cabinet. This unit is designed for face-frame construction only.
Two 35 quart white bins are included with the carriage. Check the product listing to confirm whether lids are included or sold separately for this configuration.
The carriage is door-mount compatible, but confirm whether the door-mount bracket is included in this SKU or sold as a separate accessory before completing your order.
This unit ships with standard slides. If soft-close is a priority, Rev-A-Shelf offers other 4WCTM configurations with soft-close slides in this family.
This maple 4WCTM pullout puts a full two-bin waste and recycling setup inside a single face-frame base cabinet, keeping the floor clear and both streams within arm's reach.
Sold In: 1 Each
