Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf top mount waste pullout gives cabinet builders, installers, and serious DIY buyers a door-mounted way to add hidden trash storage inside a kitchen cabinet. This Rev-A-Shelf 4WCTM unit is a single bin waste pullout built with a solid maple frame, a white waste bin, and heavy-duty ball bearing slides. The pullout is designed for door mounting only and uses rear adjustable mounting brackets to help address cabinet depth variances. This model is part of the top mount trash pullouts category and is made for a 1-3/4 inch face frame application. The included waste bin is 35 quarts, and single 35 quart versions also include a plastic storage bin at the back of the unit for small bag rolls or other supplies.
Key specs to confirm: This 35 quart waste pullout is an 11-1/2 inch maple top-mount unit for door mounting only, and this specific model is intended for a 1-3/4 inch face frame application. Buyers should confirm cabinet opening size, interior depth, door attachment method, and whether the cabinet construction matches the required face frame condition before ordering. The pullout uses heavy-duty ball bearing slides with 1 inch over-travel and a stated 150 lb maximum load. If you need additional fit, load, or installation details beyond these verified facts, confirm them with the manufacturer or technical documentation.
What's included: A fully assembled solid maple pullout frame, one 35 quart white waste bin, rear adjustable mounting brackets, standard slides, and a plastic rear storage bin on this single 35 quart configuration.
What to verify before ordering: Confirm cabinet width and depth, face frame type, door-mount suitability, clearance for slide travel, and whether spacers are needed for your cabinet layout. Spacer kits for custom applications can add up to 1-1/2 inch per side.
A single bin waste pullout like this is often chosen when a kitchen needs concealed trash access without giving up a large amount of cabinet space. In a remodel or new cabinet build, a door mount trash pullout keeps the cabinet front and pullout moving together, which can make daily use more direct than opening a door first and then pulling an inner frame. For installers working on face frame cabinetry, this model is specifically configured for a 1-3/4 inch face frame application, so that detail matters early in the planning stage.
The Rev-A-Shelf 4WCTM series is designed for door mounting only. That matters for buyers who want a true integrated cabinet-front pullout and do not want to adapt a unit intended for another mounting style. The rear adjustable mounting brackets are useful when cabinet depth varies, which is a common issue in field conditions. Instead of assuming every box is identical, the bracket design gives the installer a way to work with those depth differences.
This maple trash pullout also fits buyers who want a wood pullout frame rather than a wire frame. The solid maple construction gives a finished cabinet look that aligns with many kitchen interiors. The included 35 quart white waste bin provides one main trash compartment, while the rear plastic storage bin on this single 35 quart version adds space for liners or small cleaning items. That extra rear bin can help keep the cabinet area more organized instead of leaving loose supplies around the sink base or utility cabinet.
For daily access, the heavy-duty ball bearing slides with 1 inch over-travel help bring the bin farther out, which can improve reach into the container. If your project has unusual side clearances or custom cabinet conditions, spacer kits are available for custom applications and can add up to 1-1/2 inch per side. Buyers should still confirm exact cabinet measurements and door mounting needs before purchase.
When comparing top mount trash pullouts, the most important differences usually come down to mounting style, frame material, bin configuration, and how much cabinet variation the hardware can handle. This Rev-A-Shelf top mount waste pullout is clearly defined on those points. It is a top-mount, door-mount-only unit with a solid maple frame, one 35 quart white waste bin, and rear adjustable mounting brackets. That gives buyers a clear picture of what kind of cabinet setup this pullout is meant for.
Another point buyers often compare is how much assembly is required. This unit comes fully assembled, which can reduce setup time and help installers focus on cabinet fit and door attachment rather than frame build-out. The use of ball bearing slides with 1 inch over-travel also gives a specific hardware detail that buyers can evaluate when they want smoother extension and better access to the waste bin.
Material consistency also matters. A maple trash pullout can be a better fit for projects where a wood interior accessory is preferred. The white waste bin gives a clear replacement and cleaning reference, and replacement bins are sold separately if needed later. For projects with nonstandard cabinet conditions, the availability of spacer kits for custom applications is another practical detail to review.
Instead of choosing by appearance alone, buyers should compare whether the pullout is made for door mounting only, whether the cabinet uses the right face frame condition, whether the included bin capacity fits the household or jobsite need, and whether the slide and bracket design match the cabinet depth and access requirements. Those checks help avoid ordering a pullout that does not match the cabinet structure.
This Rev-A-Shelf waste pullout is designed for door mounting only.
This single bin waste pullout includes one 35 quart white waste bin.
This waste pullout is specified for a 1-3/4 inch face frame application, so cabinet construction should be confirmed before ordering.
This top mount trash pullout comes fully assembled.
This maple trash pullout uses heavy-duty ball bearing slides with 1 inch over-travel.
This 35 quart Rev-A-Shelf unit includes a plastic storage bin at the back of the pullout.
This face frame cabinet waste pullout requires cabinet opening, interior depth, face frame condition, and door-mount clearance to be checked first.
This waste pullout includes rear adjustable mounting brackets to help with cabinet depth variances.
Replacement bins for this white waste bin configuration are sold separately.
This door mount trash pullout should be installed per manufacturer installation guidance and local building requirements where applicable.
Single bin waste pullout buyers should focus on cabinet fit, door-mount compatibility, and included components before placing an order. This Rev-A-Shelf unit includes a fully assembled maple frame, one 35 quart white waste bin, standard slides, rear adjustable mounting brackets, and the rear storage bin used on single 35 quart versions. Confirm that your cabinet matches the 1-3/4 inch face frame requirement, that your opening and depth support the pullout, and that your project calls for a door mounting only design. Those checks help ensure the pullout fits the cabinet and installs as intended.
Sold In: 1 Each
