
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf top mount trash pullout is a door-mount waste pullout built for kitchen cabinet trash access with a solid maple frame and two white bins. This double bin trash pullout is designed for door mounting only and uses ball bearing slides with 1 inch over-travel. The Rev-A-Shelf unit includes two 50 quart waste bins and rear adjustable mounting brackets to help address cabinet depth variances. This maple waste pullout is the 18 inch model configured for a 1-1/2 inch face frame application. For buyers replacing a worn door mount trash pullout or adding concealed waste storage to a face frame cabinet, this assembled pullout keeps the product type, bin size, and mounting style clear before you order.
Key specs to confirm: This top mount waste pullout is an 18 inch model with two 50 quart bins and a configuration described for a 1-1/2 inch face frame application. It is designed for door mounting only, so buyers should confirm that the cabinet door can be mounted to the pullout as intended. Check cabinet opening size, interior depth, and clearance for a double-bin frame before ordering. The unit has rear adjustable mounting brackets for cabinet depth variances and uses heavy duty ball bearing slides with 1 inch over-travel and a 150 lb maximum load. Any additional dimensional, compliance, or installation details not shown here should be confirmed with the manufacturer or technical documentation.
What's included: A fully assembled solid maple waste pullout frame, two 50 quart white bins, rear adjustable mounting brackets, and standard heavy duty ball bearing slides.
What to verify before ordering: Confirm face frame type, 1-1/2 inch application match, cabinet opening width, interior depth, door mounting suitability, clearance for two bins, and whether any spacer kits are needed for a custom installation.
A buyer usually chooses this product when a standard freestanding can wastes floor space or when a cabinet needs a cleaner trash setup. This Rev-A-Shelf top mount trash pullout fits that use case by placing two 50 quart waste bins inside the cabinet on a fully assembled maple frame. For a busy kitchen, a double bin trash pullout can support one bin for general waste and one bin for sorting, staging, or overflow. Because the unit is designed for door mounting only, it is aimed at buyers who want the cabinet door and pullout to move together as one assembly.
Installers often need a waste pullout that can handle minor cabinet depth differences without field-built modifications. The rear adjustable mounting brackets are relevant here because the product data states they are intended for variances in cabinet depth. That can simplify planning when cabinet interiors are not perfectly uniform. The heavy duty ball bearing slides and 1 inch over-travel also matter in day-to-day use. Over-travel can improve access to the back area of the bins, which is useful in a deeper cabinet where reach is otherwise limited.
This 18 inch trash pullout is tied to a 1-1/2 inch face frame application, so fit should be checked carefully before purchase. Buyers replacing an older unit should confirm not only the cabinet opening but also the frame style and the door-mount requirement. If the cabinet is frameless or uses another face frame dimension, the broader series may include other versions, but that must be matched to the specific cabinet before ordering. Spacer kits are available for custom applications and can add up to 1-1/2 inch per side, but the exact need for spacers should be verified for the cabinet in front of you.
When buyers compare this product type, the important differences are usually mounting style, bin capacity, frame construction, and how much adjustment the unit allows during install. This Rev-A-Shelf waste pullout is clearly identified as a top mount, door-mount-only model with two 50 quart white bins. That makes it easier to compare against other pullouts that may use a different mounting method, a single-bin layout, or another cabinet application.
The solid maple frame matters for buyers who want a wood pullout rather than a wire or sheet-based assembly. The fact that the unit comes fully assembled can also reduce setup time compared with products that require more field assembly. The heavy duty ball bearing slides, 1 inch over-travel, and 150 lb maximum load give concrete points for comparison when a cabinet will see regular use. Those are practical details a contractor or serious DIY buyer can evaluate without relying on vague marketing language.
Fit remains the deciding factor. A waste pullout can have the right bin capacity and still be the wrong choice if the cabinet style does not match. This model is described for an 18 inch application with a 1-1/2 inch face frame condition, and it is designed for door mounting only. Before selecting any top mount waste pullout, buyers should confirm cabinet opening, interior depth, door attachment plan, and whether custom spacing is needed. That approach helps avoid ordering a unit that is close in concept but wrong for the actual cabinet.
This Rev-A-Shelf waste pullout is designed for door mounting only, so the cabinet door is intended to attach to the pullout assembly.
This double bin trash pullout includes two white 50 quart waste bins.
This model is described for a 1-1/2 inch face frame application, so the cabinet frame style should be checked before purchase.
This 18 inch trash pullout should be matched to cabinet opening size, interior depth, face frame condition, and door mounting requirements before ordering.
This top mount waste pullout uses heavy duty ball bearing slides with 1 inch over-travel.
This Rev-A-Shelf maple waste pullout comes fully assembled according to the verified product description.
This waste pullout includes rear adjustable mounting brackets designed to address variances in cabinet depth.
This Rev-A-Shelf trash pullout is described with a 150 lb maximum load. Follow manufacturer installation guidance and local building requirements where applicable.
Spacer kits are available for custom applications and can add up to 1-1/2 inch per side. Exact spacer needs should be confirmed before ordering.
18 inch trash pullout buyers should confirm cabinet style, door-mount suitability, and interior clearance before placing the order. This Rev-A-Shelf top mount waste pullout includes a fully assembled maple frame, rear adjustable mounting brackets, standard ball bearing slides, and two 50 quart white bins. Before purchase, verify the 1-1/2 inch face frame application, cabinet depth, and whether any spacer kit is needed for your installation. A careful fit check helps ensure the pullout, bins, and door mounting plan match the cabinet the first time.
Sold In: 1 Each