Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf top mount trash pullout is a door-mount waste pullout built for cabinet installations that need sturdy daily access to two waste bins. This Rev-A-Shelf unit uses a solid maple frame, includes two white 27 quart waste bins, and comes fully assembled for faster setup. The RS4WCTM-15DM2 configuration is part of the 4WCTM Series, which is designed for door mounting only. This double bin waste pullout also uses heavy duty ball bearing slides with 1 inch over-travel and a 150 lb maximum load rating. Rear adjustable mounting brackets help accommodate cabinet depth variances, which is useful when fitting a cabinet trash pullout into kitchens where interior dimensions are not perfectly uniform.
Key specs to confirm: This top mount waste pullout is listed at 13-1/2 inches and includes two 27 quart bins. Buyers should confirm cabinet opening width, interior depth, and height clearance for the frame, bins, and slide travel before ordering. Because the 4WCTM Series is designed for door mounting only, confirm that your cabinet door and mounting area are suitable for a door-attached pullout. The series is made in versions for 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frame and frameless applications, so verify which cabinet construction matches this specific unit. If additional load, dimensional tolerances, or technical installation details are needed, confirm them with the manufacturer or technical documentation.
What's included: Verified included items are a fully assembled solid maple frame, standard slides, rear adjustable mounting brackets, and two white 27 quart waste bins.
What to verify before ordering: Check cabinet construction, usable opening width, interior depth, door mounting suitability, and clearance for slide over-travel. If you need spacers for a custom application, confirm whether a spacer kit is required because spacer kits are available separately and can add up to 1-1/2 inches per side.
A double bin waste pullout fits buyers who want one cabinet location to handle both trash and recycling without leaving freestanding containers in the room. In a kitchen remodel, this can help keep workflow tight around prep and cleanup zones. In a replacement project, it helps when an older cabinet trash pullout has worn slides or a weak frame and the buyer wants a fully assembled unit from a known brand.
This Rev-A-Shelf waste pullout is designed for door mounting only, so it suits cabinets where the user wants the door and waste frame to move together. That setup is useful in busy kitchens because access is direct and predictable. The two 27 quart waste bins support sorting while keeping both containers inside one opening. For many buyers, that is the main reason to choose a double bin waste pullout instead of a single container layout.
The solid maple frame matters in practical use because the pullout structure needs to stay square as the bins are removed, emptied, and reloaded. Rear adjustable mounting brackets help when cabinet depth varies slightly from one installation to another. That can make a difference for installers working in existing cabinetry where dimensions are not always exact. The heavy duty ball bearing slides and 1 inch over-travel also support easier access by bringing the bins farther out of the cabinet.
Buyers searching RS4WCTM-15DM2, door mount trash pullout, or maple waste pullout are often trying to confirm whether the unit matches a specific cabinet style. The key check is not just width. You should also confirm face frame or frameless construction, the face frame size used by your cabinet, and whether the door can be mounted as required. If your installation needs extra side spacing, review spacer kit needs before purchase because those parts are available for custom applications.
When buyers compare waste pullouts in general, the most useful differences are usually frame material, mounting style, included bins, and slide hardware. This Rev-A-Shelf top mount trash pullout stands out by combining a solid maple frame, fully assembled construction, rear adjustable mounting brackets, and two included white bins. Those are practical details that affect install time and daily use.
A top mount waste pullout with standard slides can be a good fit when the installer wants a straightforward setup and verified hardware details. Here, the heavy duty ball bearing slides are specified with 1 inch over-travel and a 150 lb maximum load. That gives buyers a clear hardware reference instead of having to guess at slide capacity. The door-mount-only design also makes the intended application clear, which helps avoid ordering the wrong pullout type for a cabinet.
Another comparison point is application range. The 4WCTM Series is offered in versions for several face frame sizes as well as frameless cabinets. That matters because cabinet construction affects whether the pullout will mount and travel correctly. Rather than assuming all waste pullouts fit the same cabinet types, buyers should confirm the exact version needed for their opening and frame style.
For reliability and consistency, many installers prefer products that arrive assembled and use clearly described mounting hardware. This Rev-A-Shelf waste pullout meets that preference with a preassembled wood frame and adjustable rear brackets. If exact cutout dimensions, installation clearances, or replacement part details are required for your project, those should be checked against current technical documentation before ordering.
This Rev-A-Shelf waste pullout is designed for door mounting only.
This double bin waste pullout includes two white 27 quart waste bins.
This top mount waste pullout should be matched to your cabinet construction, including face frame or frameless design and the applicable face frame size.
This cabinet trash pullout is listed at 13-1/2 inches.
This Rev-A-Shelf waste pullout comes fully assembled.
This waste pullout uses heavy duty ball bearing slides with 1 inch over-travel.
This Rev-A-Shelf waste pullout is specified for 150 lb maximum loads.
This top mount waste pullout includes rear adjustable mounting brackets to help accommodate cabinet depth variances.
Spacer kits are available for custom applications and can add up to 1-1/2 inches per side, so confirm whether your cabinet needs them.
This door mount trash pullout should be installed by following manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf waste pullout is a practical choice when you need a fully assembled, door-mounted cabinet unit with two included 27 quart bins. Before purchase, confirm cabinet construction, opening size, interior depth, and door mounting compatibility for this 13-1/2 inch model. Included components are the maple frame, standard slides, rear adjustable mounting brackets, and white bins. If your application needs custom spacing or exact technical clearances, verify those details before ordering to avoid fit issues at install time.
Sold In: 1 Each
