Rev-A-Shelf 4WCTM 14-1/2" Maple 2-35 Quart Top-Mount Waste Pullout with White Bins and Standard Slides, 4WCTM-18DM2-175

A Maple Top-Mount Waste Pullout for the Face-Frame Cabinet Run

This Rev-A-Shelf 4WCTM pull-out brings two 35 quart waste bins up through the top of a base cabinet, keeping trash and recycling behind a door in a narrow face-frame cabinet opening.

Key Features

• Two 35 quart white bins provide separate compartments for trash and recycling in one pullout.
• Top-mount design loads from above so bins lift in and out without reaching around a side-mounted carriage.
• Maple carriage construction suits cabinetry where the interior wood finish matters.
• Full-extension slides bring the entire bin set out of the cabinet for clear, unobstructed access.
• Door-mount compatible so both bins roll out together when the cabinet door opens.
• 150 pound weight capacity handles fully loaded bins without stressing the slide system.

Two Bins, One Cabinet Door

Separating trash from recycling usually means two cans on the floor or two separate cabinet runs. This pullout puts both streams behind one door in a 14-1/2 inch cabinet opening. The top-mount format means the bins drop into the carriage from above and lift straight out when it is time to empty them, so there is no awkward angling around a side frame. The full-extension slides bring the bin set forward until it clears the cabinet face, so the back bin is just as reachable as the front one.

Maple Build and White Bins

The carriage is maple, a natural match for maple cabinet interiors and a clean look compared to a bare metal frame. The two bins are white, a neutral pairing against the warm wood. The unit is rated to 150 pounds across the two bins combined, so it carries two fully loaded containers without putting strain on the slides. The door-mount hardware connects the carriage to the cabinet door so the whole assembly opens in one motion.

Where This Pullout Fits

This is a solid choice for a kitchen remodel or a cabinet shop building face-frame runs where the client wants a dedicated two-stream waste station in a compact base cabinet. The 14-1/2 inch minimum cabinet opening makes it one of the narrower double-bin options in the 4WCTM line, so it works in a tighter run where a wider double-bin unit would not fit. Designers specifying kitchen storage and contractors setting up a standard waste cabinet will find the face-frame dimensions straightforward to work with. For a similar layout with soft-close slides or a larger 50 quart bin, other variants in the 4WCTM series carry those configurations.

Common Questions

Trash and Recycling, Contained and Out of Sight

Choose this maple top-mount pullout to fit two 35 quart bins behind one cabinet door in a 14-1/2 inch face-frame opening, with full-extension slides that bring both bins all the way forward.