Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCTM top-mount waste pullout mounts inside a face-frame base cabinet and rolls two covered 35-quart white bins out from behind a door, keeping trash and recycling contained and out of sight.
A single base cabinet handles both trash and recycling when it is outfitted with this double-bin pullout. The two bins sit side by side on the maple carriage and come forward together on a single pull, so there is no need to open two doors or manage two separate units. Because the carriage mounts at the top of the cabinet opening rather than the floor, the space beneath the bins stays clear, which makes cleaning easier and leaves room to run a bin liner without fighting the cabinet base. When paired with a door-mount bracket, the whole assembly opens with the door, which is the setup most installers and homeowners default to in a kitchen.
The carriage is finished in maple, which blends with unfinished or natural-wood cabinet interiors common in face-frame construction. The two 35-quart bins are white, a clean, neutral look that reads well against the maple frame. Standard full-extension slides carry the carriage out to full travel, giving clear access to both bins without needing to reach past the door. The 150-pound capacity is shared across both bins, so a pair of moderately loaded bins is well within what the system is built to handle. This series uses a standard slide system rather than a soft-close mechanism, which suits installations where a straightforward, low-maintenance setup is preferred over damped motion.
This unit is sized for a face-frame base cabinet with a minimum 14-3/4-inch opening width, 22-3/4-inch depth, and 18-11/32-inch height. It is a practical choice for a kitchen renovation or cabinet shop fitting face-frame cabinetry where a double-bin waste setup is part of the plan and soft-close is not required. Cabinet shops specifying this unit in volume will find it straightforward to install and easy to pair with standard door hardware. Homeowners fitting it into an existing cabinet should measure the opening against the three minimum dimensions before ordering, since all three must be met for the carriage to fit and operate correctly.
This pullout is designed for face-frame cabinets. The minimum opening width is 14-3/4 inches, minimum depth is 22-3/4 inches, and minimum height is 18-11/32 inches. All three dimensions need to be met.
Yes. Two 35-quart white bins ship with the unit. Check the product listing for lid availability specific to this configuration, as lids may be sold separately depending on the configuration ordered.
No. This model uses standard full-extension slides. If soft-close motion is a requirement, look at the 4WCTM soft-close variants in this family.
The carriage can be connected to the cabinet door so the bins roll out when the door is pulled open. A door-mount bracket is required for this setup; confirm whether it ships with this SKU or is sold separately before ordering.
This maple top-mount pullout puts trash and recycling behind a single cabinet door in a face-frame base cabinet, with full-extension slides and a 150-pound capacity built to handle daily kitchen use.
Sold In: 1 Each
