Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCTM waste pullout mounts to the top of a base cabinet and rolls two 35-quart bins out from behind a cabinet door, keeping trash and recycling contained and out of sight in a face-frame installation.
Separating trash from recycling normally means dedicating two cabinet openings to waste. This pullout fits both 35-quart bins side by side into a single 15-inch face-frame cabinet, so the cabinet runs more efficiently without giving up a second door. The top-mount configuration hangs the carriage from the top of the cabinet rather than resting it on the floor, which keeps the cabinet base clear and positions both bins for easy drop-in access from above when the unit is extended. Full-extension slides bring the rear bin out completely, so neither container ends up buried behind the other.
The carriage is finished in maple, a warm, natural look that blends into a typical wood cabinet interior rather than standing out as an insert. The unit is rated to 150 pounds, which is sufficient capacity for two bins in regular kitchen use. The two bins are white and sized at 35 quarts each, a practical volume for a household that generates meaningful trash and recycling between emptying cycles. Standard slides provide straightforward in-and-out travel without the additional mechanism of soft-close hardware.
This unit is built specifically for face-frame cabinet construction. The minimum cabinet opening is 15 inches wide and 18-11/32 inches tall, with a minimum depth of 22-3/4 inches. Measure the interior of the cabinet opening against those numbers before ordering, because the fit requirements for face-frame and frameless cabinets differ and this carriage is dimensioned for face-frame. It is a strong choice for a kitchen renovation, a cabinet shop building face-frame runs, or a contractor sourcing waste hardware for a residential install where a maple interior finish is already in the plan. If soft-close slides are preferred, other variants in the 4WCTM series carry that motion upgrade.
The minimum opening is 15 inches wide, 18-11/32 inches tall, and 22-3/4 inches deep. These are face-frame cabinet dimensions; this unit is not designed for frameless construction.
Yes. Two 35-quart white bins ship with the unit. Check availability of replacement bins and lids separately if needed down the road.
Lids are not confirmed as included in the source data for this SKU. If lids are required, verify at the time of order whether they are included or sold separately.
No. This variant uses standard slides. Soft-close versions are available in other 4WCTM configurations.
A door-mount bracket attaches the cabinet door to the pullout so the unit extends when the door is opened. The door-mount hardware should be confirmed for inclusion or sold separately at the time of purchase.
This maple top-mount pullout puts a full-size trash and recycling setup inside a single 15-inch face-frame base cabinet, with both bins rolling out completely on full-extension slides.
Sold In: 1 Each
