Titus Tool SYS 6 housing is a drop on cam fastener designed for 15/16 mm (5/8 inch) panels, giving cabinet and furniture builders a dedicated RTA fitting matched to common panel thickness. The almond finish housing uses a knock in outrigger design, so it can be machine inserted or driven with a hammer to suit different production setups. A slight lip on the inside of this drop on cam helps secure the top shelf before the screw is fully set, which supports handling and positioning during assembly. As part of the Titus Tool RTA and system fittings range, this housing fits into standard system workflows for casework and other ready-to-assemble constructions. The outrigger style is engineered for easy alignment and added strength, providing support at the connection point when the cam is tightened in service.
This Titus Tool S6 15/16 mm knock in outrigger housing is intended for 15/16 mm (5/8 inch) material, so drilling depth and panel layout can be set around that specific thickness. The cam housing is designed with minimum drilling requirements and does not require edge boring, which simplifies CNC programming and manual drill setups. For outrigger cams, the recommended boring bits are AA201010 and AA203201, using 10 mm and 20 mm right-hand boring bits to form the mating holes. The housing can be machine inserted for high volume cabinet work or knocked in with a hammer on smaller runs, providing flexibility in how the fitting is seated. Once installed, the angle drive feature allows driving the cam from an angle, which helps when working inside assembled cases or tight compartments.
The Titus Tool S6 15/16 mm knock in outrigger housing is a fastener in the RTA and system fittings class, so it is suited to ready-to-assemble cabinet and furniture construction. It is designed specifically for 15/16 mm (5/8 inch) panels, matching many case sides, dividers, and shelves used in production woodworking. The almond color housing can be used where a light-toned fitting is preferred at the joint. The outrigger style provides easy alignment and added strength at the connection, which supports cabinet carcasses and shelving that must hold everyday loads. Because this SYS 6 housing can be machine inserted, it fits into automated drilling and inserting stations on high volume lines. The same housing can be knocked in with a hammer, so smaller shops or on-site operations can use identical fittings without specialized inserters.
This RTA system fitting uses a linear cam design that produces constant tightening loads while being driven, so each turn of the driver applies a predictable clamping force to the joint. That behavior helps keep panel joints consistent from unit to unit, which is important when building multiple cabinets or fixtures to the same standard. The drop on cam configuration with a slight inner lip holds the top shelf before the screw is fully set, giving the assembler a stable resting position while parts are aligned. The angle drive feature is aimed at maximum driving comfort, making it easier to turn the cam when access is from an angle inside a cabinet or under a shelf. Minimum drilling requirements and the absence of edge boring streamline both CNC and line boring processes, reducing operations needed to prepare 5/8 inch panels for this housing. Recommended right-hand boring bits AA201010 and AA203201 define the 10 mm and 20 mm hole pattern for outrigger cams, which supports repeatable drilling layouts across multiple panel designs.
The Titus Tool SYS 6 housing is designed for 15/16 mm (5/8 inch) panels, so boring depth and layout can be matched to that material thickness in cabinet and furniture parts.
The S6 15/16mm knock in outrigger housing can be machine inserted or knocked in with a hammer, allowing use on automated production lines or in manual assembly work.
The SYS 6 housing has minimum drilling requirements and needs no edge boring, which simplifies machining steps on 5/8 inch panels during casework production.
For outrigger cams, recommended bits are AA201010 and AA203201, using 10 mm and 20 mm right-hand boring bits to produce the proper hole pattern.
The drop on cam has a slight internal lip that holds the top shelf until the screw is set, supporting alignment while panels are positioned and tightened.
The linear cam design provides constant tightening loads during driving, helping joints clamp consistently across multiple RTA assemblies.
The Titus Tool SYS 6 housing in almond, part number 006439.841.001, is a drop on outrigger cam for 15/16 mm (5/8 inch) panels within RTA and system fittings. Its knock in design, angle drive feature, and minimal drilling requirements support both high volume production and smaller assembly operations. When a project calls for ready-to-assemble joints in 5/8 inch casework using linear cam tightening, this housing provides a defined solution within the Titus Tool system. For RTA cabinet or furniture builds based on 5/8 inch panels, use this SYS 6 housing where outrigger alignment and constant cam loading are needed.
Sold In: 50 Each
