Quickfit 5mm dowel is a standard screw-in dowel designed for KD (knock-down) fittings, so it ties cabinet or furniture components together in a repeatable way for RTA and shop assembly work. As part of a System 6 cam and dowel layout, this dowel works as the threaded post that the cam locks onto, creating a secure joint between panels in ready-to-assemble construction. The dowel is threaded for 5mm system holes, which fits common line-boring patterns in cabinet shops and production environments that follow 5mm drilling standards. A 9mm drilling depth is specified, so boring operations can be set for consistent hole depth that supports accurate engagement of the dowel threads. Dowels feature an integral skirt that acts as a positive stop during insertion, preventing overdriving into the panel and helping maintain consistent projection for cam engagement.
This Titus Tool Quickfit 5mm dowel uses a screw-in design for KD fittings, so it installs by driving into a pre-bored 5mm system hole until the integral skirt contacts the surface. The threading matched to 5mm system holes allows the dowel to bite into the sides of the bored hole, which stabilizes the connector under cam load in panel-to-panel joints. A 9mm drilling depth is specified, so boring operations can be set to that depth to give enough material for the threads while still leaving room in the panel for other hardware or internal features. When the skirt hits the panel face, it acts as a positive stop, signaling that the dowel is properly seated and leaving the projecting length ready for System 6 cam engagement.
The SAP description "SYS 6 DOWEL, PANEL TO PANEL" identifies this part as a System 6 dowel meant to connect one panel directly to another, which suits cabinet cases, wardrobe carcases, and similar RTA assemblies. As a standard screw-in dowel for KD fittings, it works wherever a cam and dowel joint is specified, giving installers a predictable fastener style across furniture or cabinet runs. The threading for 5mm system holes aligns with typical line-bore machinery and jigs, so shop programs built around 5mm drilling can drop this dowel into existing patterns without changing the fundamental hole size. The defined 9mm drilling depth supports consistent hole geometry through different panels in a job, which helps maintain uniform cam pull and joint clamping from unit to unit. Because the dowel is part of a System 6 cam and dowel system, it serves as the compatible post element that the cam locks onto, allowing knock-down construction that can be assembled on site after machining in the shop.
The integral skirt on the dowels working as a positive stop during insertion plays a key role in repeatability, because it sets a fixed seating depth that keeps the exposed dowel length consistent for every joint. That positive stop helps protect against driving the dowel too deep in softer materials, supporting reliable engagement with System 6 cams even when panel densities vary. The 9mm drilling depth specification further supports repeatable assembly, since boring equipment can be set once at 9mm and used across all parts that will receive this connector. With threads cut for 5mm system holes, the dowel relies on the precise 5mm bore to carry load, so a clean, correctly sized hole translates directly into joint stability in KD furniture and cabinet builds. As part of the RTA and System Fittings class, this Quickfit 5mm dowel fits into an overall hardware strategy for flat-pack or shop-built knock-down projects where controlled fits and predictable assembly steps matter.
This Quickfit 5mm dowel is a standard screw-in dowel for KD knock-down fittings, so it serves panel-to-panel joints in System 6 cam and dowel cabinet or furniture assemblies.
The dowel is threaded for 5mm system holes, so it fits standard 5mm line-bored patterns and lets shops rely on existing drilling programs for KD cam and dowel connections.
The specified 9mm drilling depth provides enough material for full thread engagement, supporting a secure hold for System 6 cam joints in KD cabinet or furniture builds.
The dowel features an integral skirt that acts as a positive stop during insertion, so it controls seating depth and keeps the projection consistent for cam engagement.
The SAP description "SYS 6 DOWEL, PANEL TO PANEL" identifies it as a System 6 panel-to-panel dowel, helping distinguish it from other RTA and system fittings in planning.
The recommended boring bit is AA201005 3/16" RH Boring Bits, which supports producing the specified 5mm system holes for this screw-in dowel.
This Titus Tool Quickfit 5mm dowel is specified as a SYS 6 DOWEL, PANEL TO PANEL, so it fits System 6 cam and dowel layouts that rely on 5mm system holes. With its standard screw-in design for KD fittings, 9mm drilling depth, and integral skirt acting as a positive stop, it supports controlled panel-to-panel joints in RTA and shop-built assemblies. For cabinet and furniture projects built around System 6 geometry, this dowel provides a defined drilling depth, known threading, and predictable seating to keep cam connections consistent from unit to unit.
Sold In: 100 Each
