SYS 6 housing 3/4 mtrl almond describes a Titus Tool cam housing designed for 18/19 mm (3/4 inch) panels, so it fits standard cabinet-side and shelf stock in many RTA and system fitting builds. This S6 knock in 18/19mm outrigger almond part uses a drop on cam with a slight lip on the inside, which helps hold a top shelf in position until the screw is set, easing handling while assembling casework. The outrigger style design offers easy alignment and added strength, so panels draw together squarely when tightened. As part of the RTA and system fittings class, this housing suits high volume production, where consistent tightening behavior and repeatable drill patterns are important for throughput.
This Titus Tool SYS 6 housing is designed for 18/19 mm (3/4 inch) panels, so drilling locations align with common carcass thickness in RTA casework. Minimum drilling requirements with no edge boring required mean only face drilling is needed, simplifying CNC programs and drill fixtures. The housing can be machine inserted or knocked in with a hammer, so production can run fully automated or semi-manual without changing components. Recommended boring bits for the outrigger cams are AA201010 and AA203201 in 10 mm and 20 mm right-hand versions, which defines the hole diameters and rotation direction that match the cam body for reliable seating.
The S6 knock in 18/19mm outrigger almond housing falls under RTA and system fittings, so it is suited to ready-to-assemble cabinet and furniture construction where cam and dowel-style joints are standard. Being available for 18/19 mm (3/4 inch) panels, it matches panel stock often used for cabinet sides, partitions, and fixed shelves, allowing uniform hardware selection across a project. The drop on cam uses a slight lip on the inside to help secure the top shelf until the screw is set, which aids in assembling horizontal shelves to vertical panels without extra clamps while the joint is being drawn tight. Outrigger style construction offers easy alignment and added strength, so the housing supports joints in load-bearing locations such as fixed shelves in base or wall cabinets. As a fastener within the RTA fittings category, this part integrates into high volume production runs that rely on repeatable cutting and boring setups.
This Titus Tool SYS 6 cam housing uses a linear cam design that delivers constant tightening loads when driving, which means each turn of the driver applies a predictable pull to the joint, helping reduce variation between units in a production batch. The angle drive feature on the cam is designed for maximum driving comfort, so the driver engages the cam at a helpful angle in tight cabinet interiors, reducing awkward wrist positions during assembly work. Minimum drilling requirements with no edge boring required speed up machining, because panels need only the specified face holes, allowing faster processing through CNC or line boring equipment. The ability to machine insert or knock in the housing with a hammer lets shops choose between automated insertion for large batches or manual insertion for small runs while using the same hardware. Ideal use in high volume production reflects that the cam housing supports fast assembly and predictable tightening behavior, which contributes to shorter cycle times and consistent finished joints.
This SYS 6 housing is available for 18/19 mm (3/4 inch) panels, so it matches standard 3/4 inch casework material for cabinet and furniture construction.
The drop on cam has a slight lip on the inside that helps secure the top shelf until the screw is set, supporting hands-free positioning while tightening.
This cam housing has minimum drilling requirements and no edge boring required, so only specified face holes are needed in the panel.
The SYS 6 housing can be machine inserted, so it works with automated or semi-automated production lines using compatible insertion equipment.
Outrigger cams use recommended boring bits AA201010 and AA203201 in 10 mm and 20 mm right-hand versions, matching the required hole diameters.
This cam housing is ideal for use in high volume production because it needs minimal drilling, can be machine inserted, and provides constant tightening loads when driving.
This Titus Tool SYS 6 housing for 18/19 mm (3/4 inch) panels combines an outrigger style body, linear cam design, and angle drive feature to support efficient assembly. The drop on cam lip helps secure the top shelf until the screw is set, streamlining casework builds. Minimum drilling requirements with no edge boring required and the option for machine insertion or hammer knock in suit both automated lines and bench assembly. For RTA and system fittings in high volume production, this SYS 6 housing 3/4 mtrl almond offers a defined boring setup and predictable tightening behavior for repeatable cabinet and furniture runs.
Sold In: 50 Each
