SYS 6 housing 3/4 mtrl candlelight is a Titus Tool drop on cam housing designed for 18/19 mm (3/4 inch) panels, so cabinet and casework joints can be locked using a system fitting matched to standard panel thickness. The drop on cam features a slight lip on the inside, which helps secure the top shelf until the screw is set, keeping the panel from shifting while the joint is tightened. This housing is part of the Titus Tool RTA and system fittings range, giving installers a purpose-built connector for ready-to-assemble furniture and cabinetry. The candlelight finish ties into projects that call for this color, so visible cam locations coordinate with the rest of the work. Being an outriggers style cam, it offers easy alignment and added strength, helping joints pull up square and stay solid in service.
This S6 knock in 18/19mm outrigger candlelight cam can be machine inserted or knocked in with a hammer, so it fits both automated lines and bench assembly setups. Minimum drilling requirements with no edge boring required allow straight-through holes instead of complex edge patterns, which shortens setup time on CNC, point-to-point, or line boring machines. The angle drive feature on the cam is designed for maximum driving comfort, letting installers drive the screw from a better approach angle when closing the joint. A linear cam design provides constant tightening loads when driving, so the pull-up on the joint stays predictable along the cam stroke. For outrigger cams, recommended boring bits are AA201010 and AA203201 in 10 mm and 20 mm right-hand versions, which helps match hole diameters and cutting direction to the cam body and flange.
The S6 knock in 18/19mm outrigger candlelight cam is classified under fasteners and RTA and system fittings, so it is aimed at cabinet, furniture, and casework assemblies built from 18/19 mm (3/4 inch) panels. Its outriggers style offers easy alignment and added strength, which suits carcasses, shelving, and partitions that rely on cam fasteners to stay square. The drop on cam feature with a slight internal lip helps secure the top shelf until the screw is set, so upper shelves and panels can be rested in position before the joint is driven home. Because it is ideal for use in high volume production, this cam fits shops that repeat the same drilling patterns across many cabinets or knock-down components. Being a Titus Tool system fitting, it works as part of a coordinated RTA fastener approach across related projects.
The linear cam design delivers constant tightening loads when driving, so each turn of the driver pulls joints together with a similar force, helping reduce variation between cabinets on a run. The angle drive feature on the cam is intended for maximum driving comfort, allowing the driver to reach and actuate the cam from an angle that works better in tight cabinet interiors and reducing strain over many cycles. Minimum drilling requirements with no edge boring required streamline boring programs, which supports consistent hole placement and reduces opportunities for mismatch when running multiple panels. The choice to machine insert or knock in with a hammer adds flexibility, letting high volume lines automate insertion while smaller runs or field work rely on manual knock-in without changing the hardware style. Recommended boring bits AA201010 and AA203201 in 10 mm and 20 mm right-hand versions are specified for outrigger cams, which ties the drilling setup directly to the cam geometry for cleaner fit and smoother insertion.
The SYS 6 housing is designed for 18/19 mm (3/4 inch) panels, so it matches common board thickness used in cabinets, closets, and other casework.
The drop on cam has a slight internal lip that helps secure the top shelf until the screw is set, keeping the panel in place while the joint is driven tight.
The outriggers style offers easy alignment and added strength, helping panels locate accurately and giving joints extra support in assembled furniture or cabinetry.
This cam can be machine inserted or knocked in with a hammer, so it works on automated production lines as well as manual assembly benches.
For outrigger cams, recommended boring bits are AA201010 and AA203201 in 10 mm and 20 mm right-hand versions, matching holes to the cam housing.
The linear cam design provides constant tightening loads while driving, giving predictable pull-up on each joint and more consistent results across multiple assemblies.
The S6 knock in 18/19mm outriggers candlelight cam from Titus Tool combines a drop on cam lip, linear cam design, and angle drive feature in a housing built for 18/19 mm (3/4 inch) panels, so it addresses common cabinet and RTA furniture builds. Its suitability for high volume production and ability to be machine inserted or knocked in with a hammer let shops use the same cam style across automated lines and bench work. When a project calls for a candlelight system fitting that aligns panels easily and adds strength in a standard 3/4 inch carcass, this SYS 6 housing offers a focused option.
Sold In: 50 Each
