S6 CAMFIX 18/19mm almond is a Titus Tool SYS 6 housing designed for 18/19 mm (3/4 inch) panels, so it matches standard RTA cabinet side and shelf thicknesses in typical woodworking projects. This SYS 6 housing uses a drop on cam design with a slight lip on the inside, which helps secure the top shelf while the screw is being set, reducing movement during assembly. The linear cam design provides constant tightening loads when driving, so the joint pulls together consistently across multiple cabinets in a run. An angle drive feature on the cam supports maximum driving comfort during assembly, aiding access when driving from different positions on the bench or line. This housing is part of the Titus Tool RTA and System Fittings range, aligning with common fastener layouts used in ready-to-assemble furniture and cabinetry.
This SYS 6 housing for 3/4 inch material is designed with minimum drilling requirements and does not require edge boring, so hole layouts stay straightforward on line borers or CNC equipment. The product is compatible with 20 mm right-hand boring bits for non-outrigger cams, matching the AA203201 boring bit reference, which aligns with standard system hole diameters. Outrigger cams use 10 mm and 20 mm right-hand boring bits, noted as AA201010 and AA203201, fitting common multi-step boring setups. The linear cam design delivers constant tightening loads as the housing is driven, which helps maintain even clamping force along cabinet joints. The angle drive feature on the cam is described as providing maximum driving comfort, so fastener access stays manageable when working inside carcasses or at less direct angles.
This S6 CAMFIX 18/19mm almond housing sits in the Fasteners and RTA Fittings category, positioning it for ready-to-assemble furniture and cabinet work. Designed for 18/19 mm (3/4 inch) panels, it suits common side and shelf material thicknesses in many carcass designs. The drop on cam format with a slight inner lip helps secure the top shelf while the screw is set, so horizontal panels stay supported while vertical panels are brought into position. Availability for 15/16 mm (5/8 inch) panels extends use to thinner cabinet constructions or shelving systems that follow that standard. The option of non-outrigger style supports economical builds where basic alignment and holding power meet project needs, while the outrigger style, described as offering easy alignment and added strength, aids in builds that need reinforced joints.
The ability to machine insert this housing ties directly to high volume production, because it allows integration into automated insertion lines. The alternative of knocking the housing in with a hammer supports smaller production runs or on-site assembly tasks where full automation is not present. As a Titus Tool RTA and System Fitting, the housing fits typical cam-and-dowel workflows used throughout the woodworking industry. The 18/19mm sizing helps installers and production teams match drilling and fastener selection to 3/4 inch stock, which is a standard material in many cabinet shops.
The linear cam design of this SYS 6 housing delivers constant tightening loads when driving, so each turn of the driver maintains a predictable pull on the joint, supporting repeatable results across identical cabinets. That constant load helps draw panels together uniformly, which is important when aligning edges and faces on visible cabinet runs. The drop on cam lip that helps hold the top shelf while the screw is being set also improves repeatability, since the shelf location is supported by the housing as each unit is assembled.
The angle drive feature on the cam is described as providing maximum driving comfort, which benefits situations where access is restricted inside a cabinet or when fasteners are driven at an angle relative to the operator. Minimum drilling requirements without edge boring reduce the number of operations, limiting variation that might arise from multiple passes. Recommended boring bits for non-outrigger cams, specifically the 20 mm right-hand AA203201 bit, and for outrigger cams, the 10 mm and 20 mm right-hand AA201010 and AA203201 bits, define the hole diameters and tool style expected in production, supporting consistent bore quality and fit from piece to piece. Suitability for high volume production reflects these combined features, as they are oriented toward fast, repeatable workflows.
S6 CAMFIX 18/19mm almond is designed for 18/19 mm (3/4 inch) panels, so it aligns with commonly used cabinet carcass and shelf thicknesses.
The drop on cam lip helps secure the top shelf until the screw is set, so the panel stays supported while the joint is tightened.
Non-outrigger cams are described as most economical, while outrigger cams are described as offering easy alignment and added strength for the joint.
This SYS 6 housing is described as ideal for use in high volume production, supporting machine insertion and efficient assembly workflows.
Recommended bits are AA203201 20 mm right-hand for non-outrigger cams, and AA201010 10 mm plus AA203201 20 mm right-hand for outrigger cams.
The linear cam design provides constant tightening loads when driving, so joints pull together with consistent clamping force across repeated assemblies.
The SYS 6 housing for 3/4 inch material from Titus Tool delivers a drop on cam with a supporting lip, a linear cam for constant tightening loads, and an angle drive feature for driving comfort. Use the non-outrigger or outrigger styles and the specified 10 mm and 20 mm right-hand boring bits to align with the stated drilling pattern. For RTA furniture and cabinet builds using 18/19 mm (3/4 inch) or 15/16 mm (5/8 inch) panels, this RTA and System Fitting provides a cam housing oriented toward high volume production workflows.
Sold In: 100 Each
