SYS 6 housing 5/8 white is a Titus Tool cam housing for 15/16 mm (5/8 inch) panels that locks panels together in RTA and system fittings work, giving cabinet and casework assemblies a controlled cam-tightened joint. The drop on cams feature a slight lip on the inside, which holds a top shelf in position until the screw is set, helping panels stay located while the joint is tightened. Available non-outrigger style is described as most economical, supporting cost-sensitive production runs without changing the basic cam function. Available outrigger style offers easy alignment and added strength, so vertical and horizontal members seat predictably during assembly. The housing is ideal for use in high volume production, matching repetitive cabinet lines. It can be machine inserted or knocked in with a hammer, fitting both automated lines and bench assembly workflows.
The housing has minimum drilling requirements with no edge boring required, so hole patterns stay straightforward and reduce machining time on panel lines. The design uses a linear cam for constant tightening loads when driving, which means the torque needed to lock the joint stays predictable from piece to piece. An angle drive feature on the cam supports maximum driving comfort, giving tool access to the cam head at an angle instead of only straight-on. Recommended boring bits for non-outrigger cams are AA203201 20 mm RH boring bit, aligning drill setup to the correct cam diameter. Recommended boring bits for outrigger cams are AA201010 and AA203201 10 mm and 20 mm RH boring bits, matching the outrigger geometry so both main and outrigger holes are cut correctly.
This Titus Tool SYS 6 housing is described as an RTA and system fitting for 15/16 mm (5/8 inch) panels, so it fits into ready-to-assemble cabinet, closet, and casework programs that standardize on 5/8 inch stock. The category listing as fasteners and RTA fittings shows its role as a structural connector in panel-based assemblies. The drop on cam lip that helps secure the top shelf until the screw is set holds horizontal panels in position, which is useful when working on upper cabinets or tall cases where hands are occupied holding tools. Availability in both non-outrigger and outrigger styles lets shops standardize on one cam family while choosing between economical joints and joints with added alignment and strength for heavier or taller units.
The linear cam design described for this housing delivers constant tightening loads when driving, so each turn of the driver produces similar clamping across multiple units, which supports repeatable production quality. The angle drive feature on the cam is designed for maximum driving comfort, letting installers approach the cam from an angle, which can reduce driver slips inside cabinets and tight case interiors. Minimum drilling requirements with no edge boring required simplify CNC or line boring programs, which can reduce setup complexity on large production runs. Being ideal for use in high volume production, this housing is suited to shops that run long batches where consistent cam behavior matters for throughput. The option to machine insert or knock in with a hammer supports both automated lines and small production cells using hand tools, so the same cam system can be used across different assembly stations without altering the basic joint concept.
The SYS 6 housing is available for 15/16 mm (5/8 inch) panels, so it matches common 5/8 inch case material in RTA cabinet and casework production.
The drop on cam has a slight lip on the inside that helps secure the top shelf until the screw is set, keeping shelves seated while the cam is driven.
The outrigger style offers easy alignment and added strength, which suits taller cabinets or heavier loads where panel registration and rigidity are priorities.
Non-outrigger cams use recommended boring bit AA203201, a 20 mm RH boring bit, matching the cam diameter and supporting accurate, repeatable holes.
Outrigger cams use recommended boring bits AA201010 and AA203201, 10 mm and 20 mm RH boring bits, covering both the main cam and outrigger drilling.
The SYS 6 housing is described as ideal for use in high volume production, supporting consistent cam operation and streamlined drilling programs for large runs.
This Titus Tool SYS 6 housing for 15/16 mm (5/8 inch) panels combines drop on cam support, linear cam tightening, and angle drive access, giving RTA cabinet lines a consistent connector. Choosing the non-outrigger or outrigger style lets production match cost and strength needs while using one cam family. With minimum drilling requirements and suitability for machine insertion or hammer insertion, the housing fits both automated and bench workflows in high volume environments.
Sold In: 100 Each
