CamFix 19mm knock-in housing gives you a drop-on cam fastener for System 6 dowel connections in 18/19 mm (3/4") panels, so you can assemble cabinet tops and shelves with a repeatable, controlled cam action. The drop on cams feature a slight lip on the inside that helps secure the top shelf until the screw is set, which stabilizes the panel while you drive the connector and reduces handling during assembly. This housing works in RTA and system fittings applications where fast, consistent cam engagement is critical for workflow. The black finish matches common concealed locations in cabinets and casework, helping the hardware visually disappear in shadow lines. As part of the Fasteners and RTA and System Fittings category from Wurth Baer Supply, this Titus Tool housing supports production-oriented cabinet and furniture assembly where System 6 dowel connections are standard.
This drop-on cam housing is designed to be knock-in or machine inserted, so the same 20 x 14 mm cam body can serve both CNC lines and bench setups. Minimum drilling requirements with no edge boring required mean the housing relies on straightforward face drilling, which shortens program time and reduces bit changes on multi-spindle heads. The linear cam design delivers constant tightening loads when driving, so the joint pulls up uniformly as you turn the System 6 screw. An angle drive feature on the cam improves driving comfort by giving better tool access to the cam head inside the cabinet, particularly in tight upper corners of carcasses and closets.
CamFix drop-on 20 x 14 mm is described as ideal for use in high volume production, so it fits cabinet and RTA furniture plants running repeatable drilling patterns. Being available for 15/16 mm (5/8") and 18/19 mm (3/4") panels lets the same connection concept serve upper and base cabinets, wardrobes, and casework built from these common thicknesses. The drop on cams feature a slight lip on the inside to help secure the top shelf until the screw is set, which is especially useful on wide cabinet tops that tend to shift before clamping. As a fastener within the RTA and System Fittings class, this housing integrates into standard cam-and-dowel layouts that many CNC programs already support, reducing changes to your existing line.
The knock-in housing format can be machine inserted or knocked in with a hammer, which lets you standardize on one cam body across automated and manual workstations and still keep drilling data identical. Minimum drilling requirements and no edge boring required simplify fixtures and shorten cycle times because fewer axes need to be indexed for each cabinet side and shelf. The linear cam design gives constant tightening loads when driving, so operators feel the same pull on every joint, which supports quality checks based on rotation feel and visual gap closure. The angle drive feature on the cam improves driving comfort by letting tools engage from a more open direction inside carcasses, helping in deep cabinets where straight access is limited. Recommended boring bits AA203201 for non-outrigger cams and AA201010 plus AA203201 for outrigger cams connect tooling directly to the chosen cam style, helping maintain hole quality and diameter tolerance that keep the knock-in housing secure during handling.
CamFix 19mm knock-in housing is available for 15/16 mm (5/8") and 18/19 mm (3/4") panels, so it fits common cabinet carcass materials used in RTA and system furniture builds.
CamFix knock-in housing can be machine inserted or knocked in with a hammer, allowing both automated lines and bench assembly to use the same cam drilling pattern.
The drop on cams feature a slight lip on the inside to help secure the top shelf until the screw is set, which stabilizes the panel while the cam screw is driven.
The linear cam design provides constant tightening loads when driving, giving a predictable pull-up of joints and supporting consistent assembly results across production runs.
The angle drive feature on the cam allows driving from an angle, which improves access and driving comfort inside cabinets and deep casework.
The system uses boring bit AA203201 for non-outrigger cams and AA201010 plus AA203201 for outrigger cams, aligning drill sizes with each cam style.
CamFix 19mm knock-in housing for the drop-on System 6 dowel layout combines a 20 x 14 mm cam body, minimal drilling, and linear cam tightening, so it supports fast, repeatable cabinet assembly. With options for 15/16 mm (5/8") and 18/19 mm (3/4") panels, it covers standard carcass thicknesses in high volume production. Use this Titus Tool cam housing when you want a drop-on connector that stabilizes top shelves with its inner lip and fits directly into established RTA and system fitting workflows from Wurth Baer Supply.
Sold In: 100 Each
