Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Allison Value Series pull brings the Everyday Heritage design into a practical cabinet and drawer handle that works across residential or commercial projects. The 3-3/4 in (96 mm) center-to-center drilling lines up with a common hole pattern, which helps streamline layout on face frames or slab fronts. The zinc die-cast material forms a solid pull body, so the handle feels substantial when operating doors or drawers. A satin nickel finish creates a neutral metallic look that coordinates with many hinge finishes and appliances, which helps keep mixed-hardware installations visually consistent. The 4-5/16 in overall length leaves some margin beyond the fastener centers, which gives fingers more clearance at the ends of the pull. A 1-1/8 in projection stands the grip off the surface, creating room for a comfortable handhold while still keeping the pull close to the front for a clean line. The 5/8 in width gives the pull a slim profile that suits smaller fronts and tight reveals.
The BP53004G10 pull uses a 3-3/4 in (96 mm) center-to-center layout, which dictates the drilling pattern on the cabinet or drawer front and ties directly into standard metric and imperial boring setups. With a 4-5/16 in overall length, the pull spans slightly beyond the hole spread, so the feet cover the drilled area while leaving some reveal at each end for alignment against rails or stile lines. The 1-1/8 in projection defines the stand-off from the surface, helping set hand clearance while cabinets sit close together in runs. A 5/8 in width keeps the footprint compact, so the pull fits comfortably on narrower stiles or smaller drawers without overpowering the front or crowding nearby hardware locations.
This Amerock satin nickel cabinet pull is part of the Everyday Heritage collection, which positions it for use wherever a consistent decorative theme is needed across multiple fronts. The 3-3/4 in (96 mm) center-to-center size places it in a common handle category for both doors and drawers, helping installers run the same pull pattern across base cabinets, wall units, and utility cabinets. Its 4-5/16 in overall length works well on mid-size drawer fronts and standard cabinet doors, giving enough span to feel substantial without overwhelming narrower frames. The 1-1/8 in projection allows the pull to operate comfortably on doors near adjacent walls or appliances, because the handle does not extend excessively into the room. With a 5/8 in width, the pull suits smaller bathroom vanities, laundry cabinets, or office casework where slimmer rails and stiles benefit from a narrower hardware footprint.
The Everyday Heritage center-to-center measurement of 3-3/4 in (96 mm) gives installers a predictable drilling dimension, supporting repeatable layout when producing multiple cabinets or replacing existing handles with the same spread. Zinc die-cast material gives the pull a uniform casting, which helps each piece match shape and feel along an entire run of doors and drawers. The satin nickel finish provides visual consistency from pull to pull, supporting projects where aligned sheen and color are important for long cabinet banks. A 4-5/16 in overall length and 5/8 in width define a specific footprint, which helps layout work stay consistent from cabinet to cabinet, reducing alignment variation along rails. The 1-1/8 in projection keeps pull stand-off uniform, so doors and drawers present the same hand clearance across the installation. Being part of the Amerock Allison Value Series ties this pull into a recognizable decorative hardware line, which supports projects that standardize on series-based styling and dimensions.
The Amerock Allison Value Series pull uses a 3-3/4 in (96 mm) center-to-center dimension, which sets the drilling distance between holes and aligns with common cabinet boring patterns.
The BP53004G10 pull has a 1-1/8 in projection, creating space for fingers behind the handle while keeping the grip close to the door or drawer face.
The Everyday Heritage pull measures 4-5/16 in overall, so installers can plan clearances and visual spacing on rails, stiles, and drawer fronts using that full-span dimension.
The Everyday Heritage cabinet pull is made from zinc die-cast, providing a solid, uniform handle body suitable for regular use on doors and drawers.
This Amerock decorative pull has a satin nickel finish, giving it a soft metallic look that works with other satin nickel components in the project.
This pull belongs to the Amerock Allison Value Series and the Everyday Heritage collection, aligning it with related decorative hardware in the same family.
Choosing the Amerock Allison Value Series 3-3/4 in (96 mm) center-to-center satin nickel pull sets a defined drilling pattern, footprint, and finish for cabinet runs. With its zinc die-cast construction, Everyday Heritage collection styling, and BP53004G10 sizing, this pull supports projects that need repeatable layouts, coordinated satin nickel hardware, and a compact handle profile that works across doors and drawers.
Sold In: 1 Each
