Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #6 x 3/4" flat head screw is designed specifically for mounting European cup hinges and drawer slides inside cabinet panels. The short 3/4" length keeps the screw well within standard 3/4" panel stock, preventing tip breakthrough on the cabinet exterior.
The 3/4" length is the critical spec on this screw. Hinge mounting plates and drawer slide brackets pre-position the fastener hole close to the panel face, which leaves little thread travel before a longer screw would exit the back of the panel. At 3/4", this screw seats fully in the mounting plate and bites securely into the panel without any risk of tip exposure on the finished cabinet exterior. That matters most when installing face-frame hinges along the inside edge of a door stile, or when attaching drawer slide mounting clips to a thin cabinet side.
The nickel finish is a functional match for the plated steel of most European hinge arms, clip-on mounting plates, and drawer slide bodies. Inside a finished cabinet, visible screw heads read as part of the hardware assembly rather than a contrast point. The flat head seats flush in the pre-formed countersinks on mounting hardware, so the screw does not stand proud of the plate surface after driving. The coarse thread and sharp point are sized for the engineered wood and plywood panels that make up the majority of production cabinet boxes.
This screw is the right choice for cabinet shops running high volumes of face-frame or frameless cabinetry with standard 3/4" panels. It works equally well for installers pulling hinges and slides from a service bag on a kitchen or bath install job. The 5,000-piece box keeps a dedicated installation station stocked without constant restocking interruptions. Renovation contractors who hang frameless Euro hinges or replace drawer slides on existing cabinetry will find the 3/4" length handles the full range of standard hardware without needing a second screw size for typical panel thicknesses.
Yes. The flat head sits in the mounting plate countersink, so the full threaded shank engages the panel material. Coarse threads in wood-based panel stock provide solid pull-out resistance at this length, and this screw matches what most hinge and slide manufacturers specify for their hardware.
Yes. The 3/4" length and #6 gauge suit both face-frame mounting plates and the line-bore positions on frameless cabinet sides. It is the standard installation screw for most European cup hinge systems regardless of cabinet construction style.
Inside a finished cabinet box, the screw head is visible next to the hinge arm or slide body. Nickel coordinates with the plated finish of most hardware and avoids the visual contrast of a plain zinc or black-oxide screw head sitting against a polished plate.
A #2 Phillips bit, which is the standard bit in most cordless drill drivers and installation kits.
A typical kitchen installation uses between 100 and 200 of these screws depending on hinge and slide count. A 5,000-piece box covers roughly 25 to 50 kitchens, making it the right buy for shops or contractors doing consistent cabinet work rather than one-off projects.
When the length is right, the finish matches, and the drive is standard, hardware installation becomes a background task instead of a sourcing problem. This 3/4" Würth hinge and drawer slide screw is that screw for production shops and working installers alike.
Sold In: 5000 Each
