Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #5 x 5/8" Hinge and Drawer Slide Installation Screw is a flat head, Phillips drive fastener built specifically for mounting European cup hinges, drawer slides, and similar cabinet hardware to panel interiors. At 5/8", the length is sized to seat fully in the hardware mounting plate and grip the panel without breaking through on thinner cabinet sides.
Hardware mounting in frameless and European-style cabinetry often calls for a screw that bites confidently without punching through the opposite face of a 1/2" or 5/8" panel. This screw's length is calibrated for exactly that scenario: enough thread engagement to hold a hinge plate or drawer slide bracket firmly, without risk of tip emergence on thinner box walls. It is also well suited for attaching hardware to the interior faces of overlay door styles where panel depth behind the mounting plate is limited. Cabinet shops installing high volumes of hinges or slides benefit from having a dedicated length on hand rather than reaching for a general-purpose screw that may be too long for shallow panel sections.
The flat head profile sits flush in the countersunk holes of European hinge mounting plates and drawer slide brackets, keeping the hardware seated cleanly against the panel face. Coarse thread provides quick engagement in the softwood, particleboard, and MDF substrates common in cabinet box construction. The zinc finish handles normal indoor conditions and is appropriate for the dry, climate-controlled environments where most cabinet hardware is installed.
This screw ships 5,000 to the box, which suits shops running continuous hinge and slide installations across production runs. Each cabinet box typically requires multiple hinge screws and several drawer slide fasteners per opening, so a high-count pack keeps the bench stocked without constant reordering. The #2 Phillips drive is the near-universal bit for this work, and the sharp point self-starts cleanly in the pre-bored holes of standard hardware mounting plates. Installers who pull hardware from multiple manufacturers can use this screw confidently, since the #5 flat head and coarse thread match the mounting geometry shared across most European-style hinge and slide products.
A screw that is too long can break through the back face of a thin cabinet panel, while one that is too short may not achieve full thread engagement in the substrate behind the mounting plate. The 5/8" length is matched to the shallow panel depths common in frameless cabinetry and to hardware mounting plates that leave limited material behind the fastener.
Most European-style hinge mounting plates and drawer slide brackets share a similar pre-bored hole and countersink geometry. The #5 flat head and coarse thread on this screw are compatible with that standard pattern, so it works across the range of European hinge and slide brands commonly used in cabinet construction.
Yes. The coarse thread is designed for the engineered wood substrates — particleboard, MDF, and plywood — used in most cabinet box construction. It seats quickly and holds the mounting plate firmly in those materials.
The zinc finish is appropriate for dry, indoor environments like kitchen and bath cabinetry that is not directly exposed to moisture. It is not intended for applications where the screw will be in regular contact with water or high humidity.
Each box contains 5,000 screws. No drive bit is included; a standard #2 Phillips bit fits this screw.
When the panel is thin and the hardware count is high, having the right length on hand keeps installation moving. The Würth #5 x 5/8" Hinge and Drawer Slide Installation Screw is a straightforward, well-matched fastener for the hardware that goes into every cabinet box you build or install.
Sold In: 5000 Each
