Zargen 6136 Integrated Drawer Slide & Drawer Side 21-5/8" Length

Zargen 6136 Integrated Drawer Slide For System Builds

Zargen 6136 integrated drawer slide combines the drawer slide and drawer side in one Grass America Zargen drawer system component, so the running gear and side wall are matched for building smooth-running drawers. The 21-5/8 inch length supports common cabinet depths while staying within Grass Zargen drawer system standards, helping keep layouts consistent across a project. The integrated self-closing feature with 60 mm (2 3/8 inch) closing range pulls the drawer fully shut over the last segment of travel, which reduces partially open drawers and keeps fronts aligned. Built-in drawer front bumpers sit between the front and the metal side, absorbing closing contact so drawer fronts seat quietly against the cabinet. Quick assembly through dowelled and integrated front fixing brackets speeds up attaching the front, which can shorten assembly time on repetitive runs. The white epoxy finish covers the metal drawer side, providing a clean, neutral appearance inside cabinets.

Key Zargen Drawer Side Details For Builders

• The integrated drawer slide and drawer side design ties guidance and side wall into one Grass Zargen drawer system component, which simplifies ordering matched parts for a drawer run.
• The self-closing feature with 60 mm (2 3/8 inch) closing range finishes the close for the last part of travel, which helps keep drawers consistently shut in everyday cabinet use.
• Built-in drawer front bumpers cushion the contact between front and side, which reduces noise at closing and supports a controlled feel when fronts meet the cabinet.
• Quick assembly through dowelled and integrated front fixing brackets lets the front connect directly to the metal side, helping streamline repetitive production steps.
• The white epoxy finish on the drawer side presents a uniform light surface, which suits bright cabinet interiors and offers a neutral background for stored items.

Installation And Panel Fit Details That Matter

The Zargen 6136 integrated drawer slide is designed with bottom panel thickness from 12.7 to 19mm (1/2 inch to 3/4 inch), so standard sheet goods for drawer bottoms fit within its clamping range. Back panel thickness from 16 to 19mm (5/8 inch to 3/4 inch) allows typical solid or composite backs to seat correctly in the metal sides. A fixed back panel height of 114mm (4 1/2 inch) defines the drawer box depth inside the metal sides, supporting uniform storage height across a cabinet bank. Drawer slide attachment using wood screws #6 x 5/8 FHP or Euro screw lengths 18mm, 13mm, and 7.5mm gives options for fastening into different cabinet materials while following the specified screw formats.

Using This Grass Zargen Drawer System On Projects

Where The Zargen 6136 Drawer Component Fits

The Zargen 6136 integrated drawer slide and drawer side belongs to the Grass Zargen drawer system, placing it within a proven metal-side drawer family for cabinetry. Its 21-5/8 inch length aligns with cabinet depths that use a 550mm nominal slide, so it suits carcasses designed around that metric size. Load capacity of 100 lb supports drawers carrying typical kitchen, bath, or shop contents within that rating, helping the slide geometry stay within its intended working range. Bottom panel thickness from 12.7 to 19mm means builders can use 1/2 inch to 3/4 inch sheet stock for the drawer bottom without changing the metal component, which simplifies material planning on multi-drawer projects. Back panel thickness from 16 to 19mm supports 5/8 inch to 3/4 inch material at the rear, tying standard panel sizes into the metal sides for a consistent box. The white epoxy finish allows this component to sit comfortably in residential or commercial interiors that favor light drawer interiors. As part of a Grass Zargen drawer system layout, the specified back panel height of 114mm helps maintain the same internal height across multiple drawers, which aids in organizing contents.

Adjustments And Settings For Repeatable Drawer Results

The Zargen 6136 integrated drawer slide provides tolerance adjustment of 2 mm (3/32 inch), giving a small range to fine-tune how the drawer sits in the opening when cabinet conditions vary slightly. Cam height adjustment of plus or minus 2mm lets installers raise or lower the drawer front relative to the side, which is useful for aligning reveal lines between adjacent fronts. Side adjustment of plus or minus 1.5mm shifts the front left or right, giving another axis to tune gaps so fronts line up cleanly along a run. The self-closing feature with 60 mm (2 3/8 inch) closing range uses that last segment of travel to draw the drawer tight, supporting consistent front alignment once adjustments are set. Drawer slide attachment using wood screws #6 x 5/8 FHP or Euro screws in 18mm, 13mm, and 7.5mm lengths links the metal runner to the cabinet side with specified fasteners, which contributes to stable action over time. Combined, these adjustment and fastening options allow the Grass America Zargen 6136 component to support precise front alignment and repeatable drawer motion in production or retrofit work.

Common Questions About This Zargen 6136 Drawer Side

Choose This Zargen 6136 For Matched Drawer Builds

The Zargen 6136 integrated drawer slide and drawer side from Grass America combines slide function, metal side construction, and self-closing with a 100 lb load rating, so one component can handle guidance and structure. With defined bottom and back panel thickness ranges plus 21-5/8 inch length, it aligns with standard cabinet materials and depths. Cam height and side adjustments help tune reveals after installation. For projects built around the Grass Zargen drawer system, this part number 22703-12 provides a clear, specified option for consistent drawer performance.