Zargen 6136 Drawer Side Slide with 100lb Capacity, 3/4 Extension, 4-5/8", White Epoxy, 16", 5/Box
Description
Zargen Integrated Euro Drawer Slide System Use
Zargen integrated euro drawer slide gives you a metal side panel and slide system in one, so you build drawers faster while keeping parts consistent across a job. This Grass America Zargen 6136 drawer side slide is part of the Grass Zargen Drawer System, so it fits into a proven drawer construction platform for cabinet shops. The drawer material thickness is 1.3mm in a white epoxy finish, so the metal sides deliver a uniform profile that hides raw edges and keeps interiors visually consistent. The system is cost effective, allowing users to assemble and install a drawer in two minutes, which helps push more boxes through the shop in less time. Automatic production capable design significantly reduces the number of steps required to make a drawer, which supports batch runs and repeat jobs. Cabinet member design allows for use in 32mm cabinet construction for easy and accurate installations, so line boring patterns tie directly into this system.
Key Drawer System Details For Shop Planning
- The drawer material thickness is 1.3mm, so the metal sides stay slim while still giving a solid profile that works well with common cabinet clearances.
- The white epoxy finish on the drawer sides delivers a neutral interior color that pairs with a wide range of casework finishes on production runs.
- The system is cost effective, allowing drawer assembly and installation in two minutes, which supports tight schedules and repeatable labor estimates.
- Automatic production capable design significantly reduces the number of steps required to make a drawer, so line-flow setups stay simple.
- The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, which helps fronts sit home consistently in day-to-day use.
- The standard system is 7/8 extension, so you get strong support over most of the drawer length while keeping the runner travel controlled.
Installation And Adjustment For Accurate Drawer Fit
Cabinet member design allows for use in 32mm cabinet construction for easy and accurate installations, so hole patterns in the case side align with this Grass Zargen drawer system. Cabinet maker provides drawer front, rear drawer panel and drawer bottom, so wood components tie directly into the metal Zargen 6136 drawer side slide. The system allows for drawer fronts to be easily adjusted in three ways - height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm and angle adjustment plus or minus 1mm - so face alignment can be dialed in without reboring or rebuilding. Built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, so the front is drawn in smoothly from a partially open position. Standard system is 7/8 extension, and using item number GF6200 the slide system becomes fully extendable, so travel can be upgraded while existing drawers do not have to be altered.
Where This Grass Zargen Drawer System Fits Best
Metal Drawer Side 4-5/8 Inch Application
Grass America identifies this component within the Grass Zargen Drawer System, so it works as part of an integrated metal-sided drawer setup rather than a loose runner. Drawer systems are available in five drawer side heights, and this version uses a 4-5/8 inch side, so it suits medium-height storage where contents need containment without a tall box. The drawer material thickness of 1.3mm means the metal side stays compact, freeing interior space relative to thicker constructions while still maintaining a defined wall. White epoxy finish on the metal side keeps the interior bright, which helps users see contents in day-to-day cabinet use. Cabinet member design allows for use in 32mm cabinet construction for easy and accurate installations, so this Zargen integrated euro drawer slide drops into standard system holes on panel processing equipment. The Zargen integrated euro drawer slide and metal side panel system is cost effective, allowing users to assemble and install a drawer in two minutes, so it lines up well with production cabinet work where time per box is measured closely.
Adjustment, Extension, And Workflow Advantages
The system allows for drawer fronts to be easily adjusted in three ways: height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm and angle adjustment plus or minus 1mm, so reveals, gaps and racking can be tuned without reshaping parts. This three-way adjustment helps align flush inset fronts and even overlay runs, because fine changes in multiple directions stack together to correct small errors in drilling or box squareness. Built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, so users can push the drawer part way and let the mechanism pull it closed, keeping faces seated against the case. The standard system is 7/8 extension, which supports most of the drawer box while keeping runner travel contained inside typical cabinet depths. Using item number GF6200, the slide system becomes fully extendable, and existing drawers do not have to be altered, so upgrades to full access can be made while leaving the installed boxes in service. Automatic production capable design significantly reduces the number of steps required to make a drawer, so assembly sequences stay short as runs grow. Cabinet maker provides drawer front, rear drawer panel and drawer bottom, which lets shops match visible wood parts to project finishes while the metal Zargen 6136 drawer side slide handles function.
Common Questions About Zargen Drawer Side Slide
What type of system is the Zargen 6136 drawer side slide?
The Zargen 6136 drawer side slide is a Zargen integrated euro drawer slide and metal side panel system, so the slide and drawer side work as one component in the Grass Zargen Drawer System.
How much weight does this Zargen drawer side slide support?
The Zargen 6136 drawer side slide has a 100lb capacity, so it handles typical residential and light commercial drawer loads within that rating.
What is the extension type on this Grass America slide?
The Grass America Zargen system uses a standard 7/8 extension, and using item number GF6200, the slide system becomes fully extendable without altering existing drawers.
How does the self closing feature behave on this drawer slide?
The Zargen integrated euro drawer slide has a built in self-closing feature that automatically closes the drawer within a range of 2-5/8 inches, pulling the front in consistently.
What drawer side height does this metal Zargen component provide?
This Grass Zargen drawer side slide uses a 4-5/8 inch side height, fitting into the range of five available drawer side heights in the Zargen system.
Which construction method does this drawer side slide support?
The cabinet member design allows for use in 32mm cabinet construction for easy and accurate installations into system-bored case sides.
Select This Grass Zargen Slide For System Builds
This Zargen integrated euro drawer slide and metal side panel system from Grass America ties capacity, self closing, and three-way front adjustment into a single assembly. When cabinet member design aligns with 32mm cabinet construction and a 4-5/8 inch metal drawer side matches your application, this Grass Zargen drawer system component provides a cost effective way to build, align and upgrade drawers while staying within a consistent hardware platform.
