
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Dierdra pull 96mm center to center gives a defined hand grip across a 3-3/4 inch span, so cabinet doors and drawers open with a consistent feel on every job. The pull comes from the Dierdra Collection by Berenson Corporation, which keeps the visual style coordinated wherever this series is used. Its zinc die cast construction creates a solid, uniform body, so each pull feels the same from piece to piece in a run of cabinets. An oil rubbed bronze finish provides a dark, traditional look that pairs with many stained wood tones in kitchens, baths, or built-ins. The pull measures 4-1/2 inches in overall length, so it covers previous 96mm drilling while leaving clear edge reveals. A 5/8 inch width across the handle presents a comfortable surface for fingers to catch and pull without feeling bulky on smaller fronts.
The 3-3/4 inch center to center drilling on this Berenson Dierdra Series pull lines up with the 96mm pattern that many cabinet lines already use, so replacements can follow an existing grid without redrilling. Its 4-1/2 inch length provides a bit of overhang beyond the screw locations, which gives visual balance on wider drawer fronts and full-height doors. A projection of 1-5/16 inches creates a consistent stand-off from the cabinet face, leaving room for fingers even when mounted near adjacent doors or side panels. With a 3/8 inch base dimension at each end, this pull seats securely on relatively narrow rails, helping maintain edge distances on framed cabinetry. The zinc die cast material provides a single molded body around the mounting points, which supports repeated daily use on active drawers and doors.
This Dierdra Series pull in oil rubbed bronze fits cabinet doors and drawers that are drilled on a 3-3/4 inch center to center layout, so it suits both new cabinets planned for 96mm spacing and existing runs already on that pattern. The 4-1/2 inch overall length works across a range of front sizes, from narrow bath cabinets to wider kitchen drawers, giving the same visual footprint everywhere the 96mm drilling is used. Its 5/8 inch handle width reads as a medium-scale pull, so it can move between wall cabinets, base cabinets, and furniture-style pieces without changing proportions dramatically. The dark tone of the oil rubbed bronze finish coordinates with other bronze decorative hardware elements, which supports a continuous look from kitchen to pantry or adjoining rooms. Because it is part of the Berenson Dierdra Collection, this pull can be matched with other pieces in the same family to keep style and finish uniform throughout a project.
The fixed 3-3/4 inch (96mm) center to center distance on this Berenson Dierdra pull makes layout straightforward when using drilling jigs or templates set for metric spacing, helping rows of hardware line up across multiple cabinet faces. Its 1-5/16 inch projection sets a repeatable stand-off that feels the same on every door and drawer, which matters when several pulls run in a line across a kitchen or office. The 3/8 inch base dimensions provide a defined footprint at each mounting point, so the feet sit fully on the rail or stile without overhanging, supporting a clean transition from metal to wood. Zinc die cast construction keeps the pull body and mounting areas uniform from part to part, which supports consistent alignment when multiple pulls are installed side by side. The oil rubbed bronze finish gives the surface a dark, unified tone that helps minor fingerprints and everyday contact blend into the overall appearance during regular cabinet use.
The Berenson Dierdra pull has a 3-3/4 inch (96mm) center to center dimension, so it matches cabinets drilled on the common 96mm spacing pattern.
The Dierdra 4060-1ORB-P pull is 4-1/2 inches in overall length, giving some length beyond the screw holes for balanced appearance on the cabinet front.
The pull projects 1-5/16 inches from the cabinet face, providing practical finger clearance while keeping the hardware close to the door or drawer.
The Berenson Dierdra Series pull is made from zinc die cast, creating a solid molded body suited to everyday cabinet door and drawer operation.
The 4060-1ORB-P pull has an oil rubbed bronze finish, giving a dark, traditional appearance that pairs well with many stained woods.
Each base on this pull measures 3/8 inch, so the feet sit neatly on cabinet rails and stiles without crowding edges on narrower frames.
The Berenson Dierdra Series 3-3/4 inch (96mm) center to center oil rubbed bronze pull provides a defined 4-1/2 inch footprint, 1-5/16 inch projection, and zinc die cast construction that suit active cabinet doors and drawers. The 3/8 inch bases and 5/8 inch handle width keep the pull properly scaled on a range of cabinet fronts. For projects built around 96mm drilling and an oil rubbed bronze finish, this Dierdra pull lets you maintain consistent spacing, feel, and appearance from cabinet to cabinet.
Sold In: 1 Each