Berenson Dierdra Series 8-13/16" (224 mm) Center to Center Oil Rubbed Bronze Pull, - 9566-1ORB-P

Dierdra Pull 224mm Center To Center Use

Dierdra pull 224mm center to center describes a Berenson Corporation cabinet handle from the Dierdra collection that is built as a decorative pull for doors or drawers, so it gives you a defined gripping point for everyday cabinet operation. The zinc material stated for this pull provides a solid metal body, which supports consistent feel when you are opening or closing heavier fronts. The oil rubbed bronze finish on this pull creates a darker, traditional look, which helps match other oil rubbed bronze hardware in the same space for a coordinated appearance across a run of cabinets. The stated center to center of 8-13/16 inches defines the hole spacing, which matters when you are laying out new drilling patterns or aligning with existing holes. The overall length of 9-1/2 inches gives you added hand space, which helps users get a comfortable grip on wider doors.

Key Dierdra Pull Details For Cabinet Work

• The pull is from the Dierdra collection, which keeps styling consistent across a project when using other Dierdra pieces with the same design language.
• The stated material is zinc, which delivers a metal construction that resists flexing in normal cabinet use, supporting a solid-feeling handle when operated repeatedly.
• The finish is oil rubbed bronze, which provides a darker tone that coordinates with similar finishes on hinges or other hardware for a unified cabinet appearance.
• The center to center dimension of 8-13/16 inches defines the mounting hole spacing, which is important when drilling new fronts or aligning to pre-bored patterns.
• The projection of 1-3/8 inches sets how far the pull stands off the surface, which affects finger clearance and reduces knuckle contact with the door or drawer face.
• The width of 5/8 inch describes the bar thickness, which influences the feel in hand and the visual scale of the pull on narrow or wider fronts.

Mounting Dimensions And Fit For This Pull

The 8-13/16 inch center to center dimension on this Berenson Dierdra cabinet pull gives you a precise drilling pattern, which is useful for maintaining straight runs of handles on banks of doors or drawers. The overall length of 9-1/2 inches means the pull extends beyond the hole spacing, which affects where edges sit relative to door stiles or drawer sides when planning layout. The 1-3/8 inch projection defines how far the grip stands off the cabinet surface, which helps provide enough room for fingers behind the pull during regular use. The 5/8 inch width describes the front profile, which influences both the contact surface for the hand and how bold the pull appears against different door and drawer sizes.

Using The Berenson Dierdra Pull On Cabinets

Where This Berenson Dierdra Cabinet Pull Fits

The Berenson Dierdra cabinet pull is classified under Decorative Hardware & Moldings in the Handles and Pulls class, so it is intended for use on cabinet doors and drawers where both function and appearance matter. The oil rubbed bronze finish lets this pull line up with similar dark bronze hardware, which is helpful when matching existing hinges or other pulls in kitchens, baths, or built-ins. With a stated center to center of 8-13/16 inches, this pull suits larger fronts or wider drawer widths, giving proportional scale on tall doors or broad drawer faces. The 9-1/2 inch length works well when users prefer a longer grip area, which can be helpful on pantry doors or wide drawers that are accessed frequently. Because it is part of the Dierdra collection, this pull can be used wherever a coordinated series of handles is desired across multiple cabinet sections.

Dimensions That Support Consistent Cabinet Results

The 8-13/16 inch center to center dimension supports repeatable drilling setups, which helps installers maintain uniform spacing from edge lines and consistent alignment across several cabinets. The 1-3/8 inch projection sets a predictable stand-off from the surface, which reduces interference with crown profiles or adjacent trim while preserving finger clearance. The 5/8 inch width defines a medium visual mass, which lets the pull sit comfortably on both standard-width rails and wider drawer faces without overpowering the front. The overall 9-1/2 inch length offers a long grip span, which distributes pulling force across more of the front and can feel more secure on heavy drawers. The zinc construction combines with these dimensions to provide a stable handle body, which supports precise positioning of the pull relative to cabinet edges for a clean finished line.

Common Questions About This Dierdra Cabinet Pull

Select This Pull For Your Next Cabinet Run

The Berenson Dierdra series 8-13/16 inch center to center oil rubbed bronze pull brings defined dimensions and a zinc construction to cabinet projects, giving you predictable drilling and a consistent metal grip across doors and drawers. The combination of 9-1/2 inch overall length, 1-3/8 inch projection, and 5/8 inch width creates a balanced profile that works well on larger fronts where a longer handle is preferred. With the Dierdra collection identity and oil rubbed bronze finish, this pull supports visually coordinated cabinet runs. Use these verified measurements and finish details to match this pull to your next cabinet installation or upgrade where a dark bronze handle with clear mounting dimensions is required.