Rev-A-Shelf SBVDT Almond Polymer Trim-to-Fit Drip Tray for 21" - 24" Vanity Sink Base Cabinets - 12/Pack

Choose a Rev-A-Shelf vanity drip tray

Rev-A-Shelf vanity drip tray helps protect a sink cabinet from minor leaks in vanity installations. This polystyrene drip tray is part of the Rev-A-Shelf SBVDT Series and is sized at 22-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. The tray is shown in almond and is sold here under manufacturer part number SBVDT-2124-A-12. As a practical choice within vanity organizers, it is designed to install into a new 24 inch vanity sink base and can be cut to fit cabinet openings for certain smaller sizes. Rev-A-Shelf states that this SBVDT series drip tray is recommended for new cabinetry, because installation may be difficult after the sink and counter top are already in place.

See vanity drip tray install advantages

• Rev-A-Shelf SBVDT Series design - Gives buyers a defined product family for matching vanity cabinet drip tray applications and replacement planning.
• Polystyrene drip tray construction - Provides a rigid tray format for helping protect a sink cabinet from minor leaks.
• 22-1/2 inch width - Helps buyers check fit for a new 24 inch vanity sink base before cabinet assembly is complete.
• 20-1/4 inch depth - Supports fit planning inside the cabinet floor area where a sink cabinet drip tray will sit.
• 3/4 inch height - Adds a raised tray edge that helps contain minor leak events inside the vanity cabinet area.
• Almond finish option - Lets buyers match the drip tray color to cabinet interiors where a lighter tray is preferred.
• Designed for new 24 inch, 30 inch, and 36 inch vanity sink bases - Gives installers a clear starting point for selecting the correct tray size by cabinet class.
• Can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets - Helps reduce waste when a trim-to-fit approach is appropriate for the cabinet opening.
• Recommended for new cabinetry - Alerts buyers to plan installation before the sink and counter top are installed.
• Standard pack available any quantity, bulk pack full box quantities only - Helps trade buyers align purchasing method with job count and stocking needs.

Confirm vanity cabinet drip tray fit

Key specs to confirm: This vanity cabinet drip tray measures 22-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. Rev-A-Shelf describes this polystyrene drip tray as designed for a new 24 inch, 30 inch, or 36 inch vanity sink base, with cut-down use for 21 inch, 27 inch, and 33 inch cabinets where appropriate. Before ordering, confirm your cabinet interior floor area, plumbing layout, and whether the tray will be installed before the sink and counter top. If you need safety, compliance, or other technical performance details, those are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: Verified listing information identifies a Rev-A-Shelf SBVDT Series almond polystyrene drip tray under part number SBVDT-2124-A-12. The SAP description indicates a 12 pack. If you need pack contents beyond that, confirm with the seller before ordering.

What to verify before ordering: Check cabinet width class, interior depth, tray height clearance, color preference, and whether your cabinet is a new vanity installation. Also confirm whether you plan to trim the tray for a smaller cabinet and whether sink, plumbing, or counter top installation will limit access.

Use a sink cabinet drip tray wisely

Match the polystyrene drip tray to leaks

A sink cabinet drip tray is usually chosen by buyers who want a simple way to help protect the bottom of a vanity cabinet from minor leaks. In many bathroom projects, the cabinet base is exposed to small drips from supply lines, shutoff valves, drain fittings, or condensation. A tray like this gives the installer a defined surface inside the cabinet rather than leaving the cabinet floor unprotected.

This Rev-A-Shelf vanity drip tray is aimed at that type of practical use. The verified product data states that it is designed to protect a sink cabinet from minor leaks. It is made of polystyrene and sized at 22-1/2 inches by 20-1/4 inches with a 3/4 inch height. For a buyer planning a new vanity install, those dimensions matter because the tray should be matched to the cabinet floor area before the sink and top are in place. That is also why Rev-A-Shelf notes that the product is recommended for new cabinetry and may be difficult to install after the sink and counter top are installed.

The fit guidance is also useful for cabinet planning. Rev-A-Shelf states that this SBVDT series drip tray is designed to install into a new 24 inch, 30 inch, and 36 inch vanity sink base, and it can be cut to fit cabinet sizes of 21 inches, 27 inches, and 33 inches. Buyers searching for a 22-1/2 inch drip tray or a cut to fit cabinet tray should still verify the actual interior cabinet dimensions and any plumbing penetrations. If the cabinet already has a sink bowl, drain, or trap installed, access may be tight, so installation sequence should be reviewed before purchase.

Compare vanity cabinet drip tray fit details

When buyers compare one vanity cabinet drip tray to another, the main differences usually come down to material, dimensions, color, intended cabinet sizes, and whether the tray is meant for new construction or retrofit work. This Rev-A-Shelf product gives clear verified points on each of those basics. The listing identifies the tray as polystyrene, almond in color, and part of the SBVDT Series. It also provides exact dimensions and explains the intended cabinet classes.

That matters because a generic mat or tray may not give the same fit guidance. Here, the buyer can start with the known 22-1/2 inch width and 20-1/4 inch depth, then compare those measurements to the actual vanity cabinet interior. The cut-down note also gives installers more flexibility when working with certain smaller cabinet widths, but it should not replace measuring the cabinet floor and checking around plumbing locations.

Another useful point is the installation timing. Some cabinet accessories can be added late in the project, but this sink cabinet drip tray is specifically noted as recommended for new cabinetry. That helps buyers avoid ordering a tray for a cabinet that is already difficult to access. For trade buyers ordering multiple vanity organizers, the pack note is also relevant: standard pack is available in any quantity, while bulk pack is tied to full box quantities only. If your job requires exact included components, packaging details, or any technical document not shown here, confirm those items before submitting the order.

Ask fit questions before drip tray orders

Order the right almond drip tray

Rev-A-Shelf vanity drip tray is a practical choice when you need an almond tray sized for vanity cabinet leak protection. Before buying, confirm the 22-1/2 inch width, 20-1/4 inch depth, 3/4 inch height, intended cabinet size, and whether your project is new construction or a harder retrofit. Verified listing details identify this as a polystyrene SBVDT Series tray and indicate a 12 pack under part number SBVDT-2124-A-12. Check fit, access, and pack needs carefully so the tray matches the cabinet and installation stage.