Rev-A-Shelf SBVDT Almond Polymer Trim-to-Fit Drip Tray for 27" - 30" Vanity Sink Base Cabinets - 12/Pack

Choose a Rev-A-Shelf vanity drip tray

Rev-A-Shelf vanity drip tray helps protect a vanity sink base from minor leaks with a polystyrene drip tray made for cabinet use. This Rev-A-Shelf product is a vanity cabinet drip tray in the SBVDT Series, finished in almond and sized at 28-1/2 inches wide x 20-1/4 inches deep x 3/4 inch high. It works as a sink cabinet drip tray for new 30 inch vanity sink base installations and can be cut down to fit certain smaller cabinet sizes. Buyers looking for a 28-1/2 inch drip tray, a cut to fit vanity tray, or practical mats for under-sink protection can use this tray to add a contained liner surface inside the cabinet. The verified pack for this manufacturer part is SBVDT-2730-A-12.

Use a vanity cabinet drip tray

• Rev-A-Shelf SBVDT Series drip tray - Gives buyers a defined vanity organizer product made for sink base cabinet protection.
• Polystyrene drip tray construction - Provides a rigid tray material for lining the cabinet bottom under a vanity sink.
• Almond finish - Helps match cabinet interiors or buyer preference where an almond tray is needed.
• 28-1/2 inch width - Fits the intended footprint for a new 30 inch vanity sink base installation.
• 20-1/4 inch depth - Covers a broad section of the cabinet floor where minor leaks are likely to appear.
• 3/4 inch tray height - Adds a raised edge that helps contain small drips inside the tray area.
• Designed for new 24 inch, 30 inch, and 36 inch vanity sink bases - Gives installers a tray format intended for common vanity cabinet sizes.
• Can be cut down for 21 inch, 27 inch, and 33 inch cabinets - Helps buyers adapt one tray style to additional vanity widths when the layout allows.
• Recommended for new cabinetry - Helps planners choose this tray before sink and countertop installation for easier access.
• Pack quantity of 12 - Supports buyers sourcing multiple trays for shop, project, or volume cabinet work.

Confirm polystyrene drip tray fit

Key specs to confirm: This polystyrene drip tray measures 28-1/2 inches wide x 20-1/4 inches deep x 3/4 inch high. Rev-A-Shelf states that this tray is designed to install into a new 24 inch, 30 inch, and 36 inch vanity sink base, and that it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. Before ordering, confirm your actual cabinet interior width and depth, the sink plumbing layout, and whether the tray will be installed before or after the sink and countertop. This product is described for protection from minor leaks. Any safety, compliance, or other technical details not shown here should be confirmed with the manufacturer or technical documentation.

What's included: Verified data identifies this item as a Rev-A-Shelf SBVDT Series almond vanity drip tray, manufacturer part SBVDT-2730-A-12, sold as a 12 pack. If you need confirmation on hardware or other included items, verify that before purchase.

What to verify before ordering: Check cabinet size, inside clearances, cut-down needs, color preference, and whether the cabinet is new or already has a sink and top installed. Confirm that a 12 pack matches your job quantity.

Compare SBVDT vanity drip tray options

Use a sink cabinet drip tray

A sink base is one of the most common places for unnoticed moisture inside a vanity cabinet. Supply line drips, drain fitting seepage, and small service leaks can mark or damage the cabinet bottom over time. A sink cabinet drip tray gives the buyer a dedicated liner under the plumbing area, and this Rev-A-Shelf tray is specifically described as designed to protect a sink cabinet from minor leaks.

For installers building new vanity cabinets, this product fits the planning stage well because Rev-A-Shelf recommends it for new cabinetry. That matters in real jobs. Once the sink and countertop are installed, access becomes tighter and tray placement can be harder. If you are ordering for a new 30 inch vanity sink base, the 28-1/2 inch drip tray size is a direct starting point to review. If your cabinet is a different width in the compatible range, this cut to fit vanity tray may still work, but the final trimmed fit should be checked against your actual interior dimensions.

This tray also suits buyers who manage multiple bath vanities and want consistent under-sink protection across a project. Because the verified pack is 12 trays, it can fit shop stocking, multi-unit work, or repeated installations where matching almond mats or trays are preferred. Buyers using the product as a vanity organizer should still think of it first as leak protection rather than a general storage insert. The main value is creating a contained tray area on the cabinet floor.

When planning around plumbing, confirm how much uninterrupted cabinet floor area you have and whether any braces, obstructions, or existing hardware interfere. If the cabinet is already assembled with the sink and top in place, note the product guidance that installation may be difficult after those parts are installed. That single detail can prevent ordering mistakes on retrofit work.

Compare polystyrene drip tray details

When buyers compare under-sink trays, the main differences usually come down to material, dimensions, color, trim flexibility, and installation timing. This Rev-A-Shelf polystyrene drip tray gives you a verified material callout, a defined almond finish, and stated dimensions of 28-1/2 inches by 20-1/4 inches by 3/4 inch high. That makes it easier to evaluate than listings that do not clearly state tray size or intended cabinet use.

Another practical point is fit range. Rev-A-Shelf states that the tray is designed to install into new 24 inch, 30 inch, and 36 inch vanity sink bases, while also allowing cut-down use for 21 inch, 27 inch, and 33 inch cabinets. For a buyer, that means the tray may cover several cabinet plans, but it does not remove the need to measure the actual opening and usable floor area. Generic trays can leave too much guesswork on trimming and placement. Here, the intended vanity cabinet applications are at least clearly stated.

Brand consistency also matters when a shop or contractor wants repeatable ordering. Rev-A-Shelf identifies this tray within the SBVDT Series and provides a specific manufacturer part number. That helps reduce confusion when reordering almond trays for matching jobs. If you are comparing options, focus on whether the tray is actually meant for vanity sink bases, whether dimensions are published, whether cut-down use is stated by the manufacturer, and whether installation timing fits your project stage. Those are the details that support a clean purchase decision without relying on assumptions.

Ask fit questions about drip trays

Order the right almond vanity drip tray

Almond vanity drip tray buyers should confirm cabinet size, installation stage, and whether a 12 pack matches the project scope before purchase. This Rev-A-Shelf SBVDT vanity drip tray gives you a verified polystyrene tray in almond at 28-1/2 inches wide x 20-1/4 inches deep x 3/4 inch high, designed for new vanity sink base use and cut-down flexibility in certain cabinet sizes. Review what is included, measure the cabinet interior, and verify access around plumbing so the tray fits the job without surprises.