Rev-A-Shelf SBVDT Almond Polymer Trim-to-Fit Drip Tray for 33" - 36" Vanity Sink Base Cabinets - 12/Pack

Choose a Rev-A-Shelf vanity drip tray

Rev-A-Shelf vanity drip tray helps protect a sink cabinet from minor leaks in vanity installations. This polystyrene drip tray is part of the Rev-A-Shelf SBVDT Series and is sized at 34-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. The tray is an almond vanity drip tray designed for new 24 inch, 30 inch, and 36 inch vanity sink base cabinets, and it can be trimmed as a cut to fit vanity tray for 21 inch, 27 inch, and 33 inch cabinets. Buyers using a vanity sink base drip tray or sink cabinet leak tray often want a simple way to catch small water issues before cabinet bottoms are damaged. This product is sold as a 12 pack under manufacturer part number SBVDT-3336-A-12.

See how this vanity cabinet drip tray helps

• Rev-A-Shelf SBVDT Series design - Gives buyers a clearly identified vanity cabinet drip tray for sink base protection.
• Polystyrene drip tray construction - Provides a formed tray material for catching minor leaks under a vanity sink.
• 34-1/2 inch width - Fits the intended cabinet range and helps buyers match tray size to the vanity base opening.
• 20-1/4 inch depth - Covers a broad section of the cabinet floor where plumbing connections are typically located.
• 3/4 inch tray height - Creates a raised edge to help contain small water events inside the cabinet.
• Almond finish option - Lets buyers choose a color that coordinates with cabinet interiors where a lighter tray is preferred.
• Designed for new 24 inch, 30 inch, and 36 inch vanity sink bases - Helps installers select a tray intended for common new vanity cabinet sizes.
• Can be cut down for 21 inch, 27 inch, and 33 inch cabinets - Gives installers a cut to fit vanity tray option when the cabinet is smaller than the original tray format.
• 12 pack configuration - Supports shop, project, or multi-unit purchasing when several vanity cabinets need protection.

Confirm vanity drip tray fit and contents

Key specs to confirm: This SBVDT vanity drip tray measures 34-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. Rev-A-Shelf lists it as a polystyrene drip tray in almond. It is designed to install into a new 24 inch, 30 inch, and 36 inch vanity sink base, and it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. Because the product note says installation may be difficult after the sink and counter top are installed, buyers should confirm cabinet access, plumbing location, and whether trimming is needed before ordering. Any unlisted safety, compliance, or load details should be confirmed with the manufacturer or technical documentation.

What's included: Verified product data identifies this item as SBVDT-3336-A-12, a 12 pack of Rev-A-Shelf polystyrene vanity drip trays. No additional hardware or accessories are listed in the verified data, so included items beyond the trays should be confirmed before purchase.

What to verify before ordering: Confirm your vanity cabinet width and depth, whether the cabinet is new or already has a sink and top installed, whether you need to trim the tray for 21 inch, 27 inch, or 33 inch use, and whether almond is the correct color for the project.

Compare vanity drip tray use and fit

Use a vanity sink base drip tray

A vanity sink base drip tray is typically chosen by cabinet shops, installers, remodelers, and serious DIY buyers who want a simple layer of protection under sink plumbing. In a bathroom vanity, even a minor drip from supply lines, shutoff valves, or drain fittings can leave stains or swelling on the cabinet floor before the leak is noticed. A Rev-A-Shelf vanity drip tray is designed for that practical use case. The tray sits in the cabinet bottom area and helps contain small leaks so cleanup can happen before minor water issues become cabinet replacement work.

This specific SBVDT vanity drip tray is useful when the job calls for a tray sized for common vanity sink bases. Rev-A-Shelf states that it is designed to install into new 24 inch, 30 inch, and 36 inch vanity sink base cabinets. That makes it a straightforward choice during new cabinet assembly or before the sink and top go in. The verified product note also says the tray can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. For installers, that matters because one tray format can cover multiple cabinet sizes when field trimming is acceptable.

Another common scenario is a buyer searching for a sink cabinet leak tray or mats to standardize protection across several rooms or units. Since this item is sold as a 12 pack, it fits project purchasing where multiple vanities are being built or stocked. The almond color can also matter in visible cabinet interiors where buyers want something other than silver. Because Rev-A-Shelf recommends this product for new cabinetry and notes that installation may be difficult after the sink and counter top are installed, buyers should confirm access before planning a retrofit. If plumbing, center supports, or cabinet floor obstructions could affect fit, verify those details before cutting or placing the tray.

Compare polystyrene drip tray options

When buyers compare a polystyrene drip tray to other generic cabinet protection products, the main questions are usually fit, installation stage, and how clearly the tray is matched to a vanity cabinet application. This Rev-A-Shelf tray is identified as a vanity cabinet product and vanity organizer, so the product type is specific rather than broad. The listed dimensions of 34-1/2 inches by 20-1/4 inches by 3/4 inch give buyers concrete sizing information for planning. That is more useful than choosing a tray with unclear cabinet intent.

Another point buyers often compare is whether a tray is made for standard cabinet sizes or whether every installation requires custom fabrication. Here, Rev-A-Shelf states the tray is designed for new 24 inch, 30 inch, and 36 inch vanity sink bases and can be cut down for 21 inch, 27 inch, and 33 inch cabinets. That supports a consistent install approach across several vanity widths. For trade buyers, consistency matters because it can simplify ordering and jobsite preparation.

Material and pack size also affect selection. This product is a polystyrene drip tray and is offered here in a 12 pack. Buyers ordering for a shop or larger project can match quantity to the number of cabinets being built. If a project needs only one tray, buyers should confirm available standard pack quantities. Since the verified data does not list hardware, adhesive, or detailed trim instructions, those points should be confirmed in technical documentation before purchase. Follow manufacturer installation guidance and local building requirements where applicable.

Ask fit questions before drip tray install

Order the right almond vanity drip tray

Almond vanity drip tray selection is easiest when you match the cabinet size, installation timing, and pack quantity to the job. This Rev-A-Shelf polystyrene drip tray is sold as a 12 pack and is sized at 34-1/2 inches by 20-1/4 inches by 3/4 inch for vanity sink base use. Before purchase, confirm whether your cabinet is a new 24 inch, 30 inch, or 36 inch vanity, or whether trimming is needed for a 21 inch, 27 inch, or 33 inch cabinet. Also confirm any included items beyond the trays if your install requires additional components.