Rev-A-Shelf SBVDT Silver Polymer Trim-to-Fit Drip Tray for 27" - 30" Vanity Sink Base Cabinets

Choose a Rev-A-Shelf vanity drip tray

Rev-A-Shelf vanity drip tray helps protect a sink cabinet from minor leaks in a bathroom vanity installation. This polystyrene drip tray from Rev-A-Shelf is a vanity cabinet accessory sized at 28-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. The silver vanity drip tray is designed to install into a new 24 inch, 30 inch, and 36 inch vanity sink base, and it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. For buyers looking for a vanity sink base drip tray or cabinet leak protection tray, this SBVDT vanity drip tray is intended for new cabinetry and may be harder to install after the sink and countertop are already in place.

See vanity drip tray buyer advantages

• Rev-A-Shelf polystyrene drip tray - helps create a protective layer at the bottom of a sink cabinet where minor leaks may occur.
• 28-1/2 inch width - fits the listed tray size for buyers planning around cabinet interior coverage and sink base layout.
• 20-1/4 inch depth - gives broad floor coverage inside the vanity cabinet to help contain small drips under plumbing connections.
• 3/4 inch height - provides a shallow lip that can help hold minor water exposure inside the tray area.
• Silver vanity drip tray finish - gives buyers a color option that works with the stated SBVDT tray offering.
• Designed for new 24 inch, 30 inch, and 36 inch vanity sink bases - supports planning during cabinet build or remodel stages before fixtures are installed.
• Cut-down fit for 21 inch, 27 inch, and 33 inch cabinets - gives installers flexibility when the cabinet opening is smaller than the original tray format.
• Rev-A-Shelf vanity cabinet product class - identifies this tray as a vanity organizer accessory made for sink cabinet use rather than a general floor mat.

Confirm vanity drip tray specs and contents

Key specs to confirm: This vanity cabinet drip tray measures 28-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. Rev-A-Shelf states that this polystyrene drip tray is designed for new 24 inch, 30 inch, and 36 inch vanity sink base cabinets, and it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. Before ordering, confirm your cabinet interior floor area, plumbing locations, and whether the tray can be inserted before the sink and countertop are installed. Safety, load, compliance, and any code-related details are not provided here and should be confirmed with the manufacturer or technical documentation if needed.

What's included: Verified data identifies this item as a Rev-A-Shelf SBVDT Series polystyrene drip tray in silver. Included hardware or extra components are not specified and should be confirmed before purchase.

What to verify before ordering: Confirm cabinet size, interior clearance, sink base application, tray color, and whether your project is new cabinetry or a retrofit. Also verify if cutting is needed for your cabinet width and whether existing plumbing, sink bowls, or installed tops will limit tray placement.

Compare vanity cabinet drip tray use cases

Use a sink cabinet drip tray

A sink cabinet drip tray is often chosen when a buyer wants a simple way to help protect the bottom of a vanity from minor leaks around supply lines, drain fittings, or shutoff valves. In a new bathroom vanity build, this Rev-A-Shelf vanity drip tray fits that planning stage well because the verified product note says it is recommended for new cabinetry. That matters for installers who want the tray in place before the sink and countertop reduce access.

For a contractor, remodeler, or serious DIY buyer, the main question is usually fit. This silver vanity drip tray measures 28-1/2 inches by 20-1/4 inches with a 3/4 inch height, so it is important to compare those dimensions to the cabinet interior and to any center stile, plumbing rough-in, or uneven base conditions. Rev-A-Shelf states that the tray is designed to install into new 24 inch, 30 inch, and 36 inch vanity sink base cabinets. The same product can also be used as a cut to fit drip tray for 21 inch, 27 inch, and 33 inch cabinets. That gives more flexibility than a fixed-size insert, but the buyer should still confirm where cuts will be made and whether those cuts affect the desired coverage under the plumbing area.

This product also fits buyers who want a cabinet leak protection tray without changing the cabinet structure. It is a polystyrene drip tray, so the product identity is clear and straightforward: it is a formed tray for the cabinet floor, not a plumbing repair part and not a decorative liner. If the vanity is already fully assembled with sink and top in place, the product note warns that installation may be difficult after those components are installed. That makes this item especially relevant during new cabinet ordering, shop fabrication, or pre-top installation in the field.

Compare polystyrene drip tray options

When buyers compare a polystyrene drip tray to other cabinet protection products, the useful differences usually come down to fit, installation timing, and whether the tray is made for vanity sink base use. This Rev-A-Shelf tray is clearly identified as a vanity cabinet product and vanity organizer accessory, which helps separate it from general-purpose mats or liners that may not be shaped or sized for sink cabinet applications.

The verified dimensions are another practical comparison point. A 28.5 inch drip tray with a 20-1/4 inch depth gives buyers a defined footprint to check against the cabinet floor before ordering. The stated ability to cut the tray down for smaller cabinet sizes is also a strong planning detail for shops and installers who work across multiple vanity widths. Instead of trying to adapt an unspecified liner, the buyer starts with a tray intended for common vanity sink base sizes and then confirms whether trimming is needed.

Brand consistency matters when the product type is simple but fit-sensitive. Rev-A-Shelf is the listed brand and the SBVDT vanity drip tray is the identified series, so buyers can match the product to project paperwork, cabinet accessory schedules, and replacement needs more easily. If your project requires exact information on hardware, edge finish after cutting, or installation method, those details are not provided in the verified data and should be confirmed before purchase. For many buyers, that check is what prevents delays on a new vanity install or a retrofit attempt where access is already limited.

Review sink cabinet drip tray questions

Order the right vanity drip tray

Rev-A-Shelf vanity drip tray is a practical choice when you need a polystyrene tray sized for sink cabinet leak protection in new vanity cabinetry. Before purchase, confirm the 28-1/2 inch by 20-1/4 inch by 3/4 inch tray size, your cabinet interior dimensions, and whether trimming is required for a smaller vanity sink base. Also verify installation timing, because the tray is recommended for new cabinetry and may be difficult to place after the sink and countertop are installed. Included accessories should be confirmed if your project requires them.