Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf vanity drip tray helps protect a sink cabinet from minor leaks in vanity installations. This polystyrene drip tray is an almond vanity drip tray from Rev-A-Shelf Corporation, made for vanity cabinet products and commonly used within vanity organizers where cabinet protection matters. The tray measures 28-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. The verified product data states it is designed to install into a new 24 inch, 30 inch, and 36 inch vanity sink base, and it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. The SBVDT series drip tray is recommended for new cabinetry, because installation may be difficult after the sink and countertop are already installed.
Key specs to confirm: This vanity sink base drip tray measures 28-1/2 inches wide by 20-1/4 inches deep by 3/4 inch high. Verified product data says it is designed for new 24 inch, 30 inch, and 36 inch vanity sink base cabinets and can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. Before purchase, confirm the clear interior cabinet floor dimensions, plumbing locations, and whether the sink and countertop are already installed. Product data notes that installation may be difficult after sink and countertop installation. If you need safety, compliance, load, or other technical details, those must be confirmed with the manufacturer or technical documentation.
What's included: Verified data identifies this item as one Rev-A-Shelf SBVDT series polystyrene drip tray in almond. Packaging is listed as shown below in source data, and sold-in details should be confirmed for the order quantity needed.
What to verify before ordering: Confirm your vanity cabinet opening and interior floor size, the cabinet width you are fitting, whether trimming is required, and whether plumbing or installed sink components will limit placement. Also confirm color preference, pack quantity, and whether your project is new cabinetry or a retrofit.
A vanity sink base drip tray is usually purchased when a buyer wants a simple way to help protect the cabinet bottom under a sink from minor leaks. In a new vanity build, this Rev-A-Shelf vanity drip tray gives the installer a defined tray footprint with verified dimensions of 28-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. That matters when you are laying out cabinet protection before the sink, countertop, and plumbing make access tighter.
For cabinet shops, remodelers, and serious DIY buyers, the practical value is fit planning. The product data states this polystyrene drip tray is designed to install into new 24 inch, 30 inch, and 36 inch vanity sink base cabinets. It can also be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. That cut to fit vanity tray flexibility helps when the cabinet width is smaller than the original tray size, but the buyer should still confirm the actual interior floor dimensions and plumbing path before trimming.
This cabinet leak tray is especially relevant in projects where supply lines, drain fittings, or shutoff valves may create a risk of small drips over time. The verified description only states protection from minor leaks, so buyers should not assume containment for major water events. If a project needs a specific retention capacity or a tested waterproofing standard, that information is not provided here and should be confirmed directly with the manufacturer.
The product data also gives an important installation note: this sink cabinet drip tray is recommended for new cabinetry, and the tray may be difficult to install after the sink and countertop are installed. For retrofit work, that warning can save time. If the sink base is already assembled and plumbed, measure access points carefully and confirm whether the tray can be inserted and positioned without interference.
When buyers compare one sink cabinet drip tray to another, the most useful factors are usually material, size, cabinet compatibility, trim flexibility, and installation timing. This Rev-A-Shelf product gives verified information in each of those areas. It is a polystyrene drip tray, it comes in almond, and it is part of the SBVDT series drip tray line used in vanity cabinet products and vanity organizers.
Another point buyers often consider is whether the tray is intended for standard sizes or custom adjustment. Here, the manufacturer states both. The tray is designed for new 24 inch, 30 inch, and 36 inch vanity sink base cabinets, and it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. That makes it easier to evaluate against cabinet plans without guessing. If your cabinet has unusual side panels, center plumbing offsets, or obstructions on the floor, confirm those details before ordering because exact cut instructions are not included in the verified data.
Brand consistency also matters in trade purchasing. Rev-A-Shelf Corporation is the verified brand on this product, and that can help buyers who already source vanity organizers and related cabinet accessories from the same manufacturer. Instead of comparing vague claims, focus on the facts provided here: tray dimensions, material, intended cabinet sizes, color, and the recommendation for new cabinetry. Those details are the most reliable basis for selecting the correct almond vanity drip tray for a sink base application.
This Rev-A-Shelf vanity drip tray is designed to install into new 24 inch, 30 inch, and 36 inch vanity sink base cabinets.
This SBVDT series drip tray can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets.
This polystyrene drip tray measures 28-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high.
This vanity sink base drip tray is recommended for new cabinetry, and product data says installation may be difficult after the sink and countertop are installed.
This Rev-A-Shelf tray is designed to protect a sink cabinet from minor leaks.
This almond vanity drip tray is made from polystyrene according to the verified product name.
This sink cabinet drip tray may require buyers to confirm plumbing locations first, because exact cutout details are not provided in the verified data.
This cut to fit vanity tray should be checked for cabinet interior dimensions, trim needs, plumbing clearance, and whether the sink and countertop are already installed. Follow manufacturer installation guidance and local building requirements where applicable.
Almond vanity drip tray selection is easier when you match the verified tray size, cabinet fit range, and installation timing to your project. This Rev-A-Shelf polystyrene drip tray is identified as one tray in almond with dimensions of 28-1/2 inches by 20-1/4 inches by 3/4 inch high. Before purchase, confirm your vanity sink base interior space, whether trimming is needed for 21 inch, 27 inch, or 33 inch cabinets, and whether existing sink or countertop installation will make placement difficult.
Sold In: 1 Each
