Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf vanity drip tray helps protect a sink cabinet from minor leaks in vanity applications. This polystyrene drip tray is part of the Rev-A-Shelf SBVDT Series and is sized at 34-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. The silver drip tray is designed to install into a new 24 inch, 30 inch, and 36 inch vanity sink base, and it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. Buyers using vanity organizers or cabinet mats often choose this type of tray to add a protective layer under plumbing. Rev-A-Shelf identifies this tray as recommended for new cabinetry because installation may be difficult after the sink and counter top are installed.
Key specs to confirm: This vanity cabinet drip tray measures 34-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. Rev-A-Shelf lists it as a polystyrene drip tray in silver. It is designed for new 24 inch, 30 inch, and 36 inch vanity sink base cabinets and can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. Before purchase, confirm your inside cabinet floor area, plumbing layout, and whether the tray can be placed before sink and counter top installation. If any compliance, safety, load, or other technical requirements apply to your project, those details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified product data identifies this item as Rev-A-Shelf SBVDT-3336-S-12 polystyrene drip trays. Packing is described as shown by the manufacturer, and sold-in quantities vary by standard pack or bulk pack. If you need exact piece count confirmation for your order configuration, confirm it before ordering.
What to verify before ordering: Check cabinet width and depth, confirm the tray will clear plumbing penetrations, verify whether you are installing in new cabinetry, and confirm whether you need a silver tray and the correct pack format for your project.
A sink cabinet drip tray is usually selected when a buyer wants a simple way to help protect the cabinet bottom from minor plumbing leaks. In a bathroom vanity, that often means placing the tray under the drain assembly, shutoff valves, and supply lines where small drips can happen over time. Rev-A-Shelf offers this SBVDT vanity drip tray as a polystyrene drip tray sized for common vanity sink base cabinets, which makes it useful for cabinet shops, installers, and serious DIY buyers planning a new vanity build.
This specific tray is 34-1/2 inches wide and 20-1/4 inches deep, so it aligns with projects where a buyer is looking for a 36 inch vanity drip tray footprint but needs to confirm the actual tray dimensions rather than relying on nominal cabinet size alone. That is an important distinction because cabinet interiors, side thickness, and plumbing placement can vary. The product data also states that the tray can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. For buyers searching for a cut to fit vanity tray, that matters when one tray format may cover several cabinet widths if trimming is appropriate for the job.
The manufacturer notes that this product is recommended for new cabinetry. That guidance matters in real installations. Once a sink and counter top are already installed, access can be tighter and tray placement can become harder. If you are retrofitting an existing cabinet, confirm clearances carefully before ordering. If you are building or installing new vanity organizers and protective mats as part of a larger cabinet package, this tray can be planned into the cabinet base before finish plumbing is complete.
Buyers should also think about application limits. The product data states that the tray is designed to protect from minor leaks. It should not be treated as a substitute for plumbing repair, nor should buyers assume any unlisted performance rating. If you need documentation on material behavior, edge trimming method, or any project-specific requirement, confirm those points with the manufacturer.
When comparing a vanity cabinet drip tray, the most useful factors are usually fit, material, installation timing, and whether the product is clearly intended for vanity sink bases. This Rev-A-Shelf tray gives buyers concrete information in each of those areas. The product type is clearly identified, the material is listed as polystyrene, the finish is silver, and the tray dimensions are provided. That makes it easier to compare against other generic mats or trays that may not list exact cabinet applications.
Another point that helps with consistency is the stated fit range. Rev-A-Shelf says this tray is designed for new 24 inch, 30 inch, and 36 inch vanity sink bases and can be cut for smaller related sizes. That kind of guidance is useful because buyers can evaluate whether they want a ready-sized tray, a trim-to-fit tray, or a different cabinet protection approach. For a trade buyer ordering multiple units, the manufacturer part number and pack description also help with purchasing control.
Generic mats may be considered for cabinet floor coverage, but a purpose-built sink cabinet drip tray is usually chosen when the buyer wants a defined tray profile and a product specifically described for vanity sink base use. The practical advantage here is not hype. It is clarity. Rev-A-Shelf provides the dimensions, intended cabinet sizes, color, and installation note so the buyer can make a more accurate fit decision before work begins.
Rev-A-Shelf vanity drip tray is designed to install into a new 36 inch vanity sink base, but buyers should confirm the actual interior cabinet floor space.
This sink cabinet drip tray can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets according to the product data.
This polystyrene drip tray measures 34-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high.
This silver drip tray is recommended for new cabinetry because installation may be difficult after the sink and counter top are installed.
This vanity cabinet drip tray may be harder to install in an existing setup, so buyers should confirm access around plumbing, sink, and counter top first.
This SBVDT vanity drip tray is designed to protect a sink cabinet from minor leaks.
The Rev-A-Shelf drip tray is verified as silver in the product data and SAP description.
Included accessories are not fully detailed in the verified data, so buyers should confirm package contents before ordering.
This vanity drip tray should be matched to cabinet interior width, depth, plumbing location, and installation timing. Follow manufacturer installation guidance and local building requirements where applicable.
Sink cabinet drip tray selection is easier when the size, material, and intended cabinet fit are clearly defined. This Rev-A-Shelf SBVDT Series tray is a silver polystyrene drip tray sized at 34-1/2 inches by 20-1/4 inches by 3/4 inch high for vanity sink base use. Before purchase, confirm your cabinet interior dimensions, whether trimming is needed, and whether installation will happen in new cabinetry. Also verify package contents and ordering quantity so the tray matches your job requirements.
Sold In: 12 Each
