Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf vanity drip tray helps protect a sink cabinet from minor leaks in bathroom vanity installations. This Rev-A-Shelf polystyrene drip tray is the SBVDT Series model sized at 28-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. The silver vanity drip tray is designed to install into a new 24 inch, 30 inch, or 36 inch vanity sink base, and it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. Buyers looking for a sink cabinet drip tray or cabinet leak protection tray often want a simple way to contain small drips before they contact the cabinet bottom. This product is sold as SBVDT-2730-S-12, a 12-pack configuration for shop, project, or volume cabinet work.
Key specs to confirm: This vanity cabinet drip tray is a Rev-A-Shelf SBVDT Series polystyrene drip tray with a silver finish. Verified dimensions are 28-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high. The tray is designed for new 24 inch, 30 inch, and 36 inch vanity sink base cabinets and can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. Before purchase, confirm your cabinet interior floor area, plumbing locations, and whether the tray can be placed before the sink and countertop are installed. If you need safety, load, compliance, or other technical details, those must be confirmed with the manufacturer or technical documentation.
What's included: Verified product data identifies this item as Rev-A-Shelf SBVDT-2730-S-12, a 12-pack of silver polystyrene drip trays. No additional hardware or accessories are verified in the provided product data.
What to verify before ordering: Check cabinet width and depth, confirm you are working with a vanity sink base application, review whether trimming is needed, and make sure installation access is available if the sink and countertop are already in place.
A vanity sink base is one of the most common places for small plumbing leaks to go unnoticed. Supply line drips, drain connection seepage, and minor overflow events can contact the cabinet floor first. A vanity sink base drip tray gives the installer or cabinet shop a defined surface under the sink area that is intended to protect the cabinet from those minor leaks. For buyers searching for a sink cabinet drip tray, the value is straightforward: create a barrier between the cabinet bottom and small amounts of water.
This Rev-A-Shelf vanity drip tray is built for that use case. The verified product data states that it is designed to protect a sink cabinet from minor leaks. The tray is made from polystyrene and has a shallow 3/4 inch height, with a 28-1/2 inch by 20-1/4 inch footprint. That size matters when you are matching the tray to a cabinet floor area and to the plumbing layout inside the vanity. Buyers looking for a 28-1/2 inch drip tray should still confirm internal clearances because cabinet construction, side panels, and plumbing penetrations can affect fit.
This product is also useful when a shop wants one tray format that covers more than one cabinet width with trimming. The verified description says the tray is designed to install into new 24 inch, 30 inch, and 36 inch vanity sink base cabinets, and it can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets. That cut to fit drip tray flexibility can reduce the need to stock several tray sizes for nearby cabinet widths. If you are planning a replacement in an existing vanity, note the manufacturer guidance in the product description: installation may be difficult after the sink and countertop are installed. That makes this item a better fit for new cabinetry planning, remodel staging before top installation, or shop pre-install work.
When comparing a polystyrene drip tray to other cabinet floor protection options, buyers usually focus on fit, installation timing, and consistency. A formed vanity cabinet drip tray gives a defined width, depth, and edge height. That is different from using a flat liner or a generic mat, where the fit and containment shape may be less predictable. Here, the verified dimensions and intended vanity sink base application give a clearer starting point for planning.
Another buying point is finish and series identification. This SBVDT drip tray is the silver version in the Rev-A-Shelf SBVDT Series, which helps buyers match existing specifications or repeat prior installs. For contractors and cabinet shops, a 12-pack can also make purchasing easier when several vanities are being built or installed in one project cycle.
Brand matters when the product data is clear and the use is specific. Rev-A-Shelf identifies this item as a vanity cabinet accessory within its vanity organizers class, and the description gives direct guidance on intended cabinet sizes and install timing. That kind of product-specific information helps reduce ordering mistakes. Buyers should still confirm exact cabinet interior dimensions, trimming needs, and access around plumbing because those jobsite factors are not fully described in the verified data.
Rev-A-Shelf vanity drip tray is designed for new 24 inch, 30 inch, and 36 inch vanity sink base cabinets and can be cut down for 21 inch, 27 inch, and 33 inch cabinets.
This polystyrene drip tray measures 28-1/2 inches wide, 20-1/4 inches deep, and 3/4 inch high.
This sink cabinet drip tray can be cut down to fit 21 inch, 27 inch, and 33 inch cabinets according to the verified product description.
This vanity cabinet drip tray is recommended for new cabinetry. Product data states installation may be difficult after the sink and countertop are installed.
This Rev-A-Shelf drip tray is designed to protect a sink cabinet from minor leaks.
This SBVDT drip tray is made from polystyrene.
This vanity sink base drip tray is silver. The product line is also available in almond according to the verified description.
This product is sold as SBVDT-2730-S-12, which is a 12-pack configuration.
This cabinet leak protection tray should be checked against cabinet interior size, sink base application, trim requirements, and installation access before purchase.
Included accessories are not verified in the provided data. Follow manufacturer installation guidance and local building requirements where applicable.
SBVDT drip tray selection is easiest when you match the verified tray size, cabinet application, and install timing to the job. This Rev-A-Shelf vanity cabinet drip tray is a silver polystyrene tray sized 28-1/2 inches by 20-1/4 inches by 3/4 inch high and sold here in a 12-pack. Before ordering, confirm cabinet interior dimensions, whether trimming is needed for your vanity sink base, and whether the tray can be installed before the sink and countertop limit access. Included accessories beyond the trays are not verified and should be confirmed if required for your project.
Sold In: 12 Each
