Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
vanity drip tray helps protect a vanity sink cabinet from minor leaks. The Rev-A-Shelf vanity drip tray in the SBVDT Series is a polystyrene drip tray sized at 22-1/2 in. wide x 20-1/4 in. deep x 3/4 in. high. This silver drip tray is designed to install into a new 24 inch vanity sink base and can be cut down to fit 21 in., 27 in., and 33 in. cabinets. As a cabinet leak tray, it gives installers and cabinet shops a simple way to add a protective liner inside a sink base during new construction or cabinet assembly. Rev-A-Shelf states that the product may be difficult to install after the sink and countertop are already in place, so fit and install timing should be confirmed before ordering.
Key specs to confirm: This Rev-A-Shelf polystyrene drip tray measures 22-1/2 in. wide, 20-1/4 in. deep, and 3/4 in. high. The product data identifies it as a silver vanity drip tray in the SBVDT Series and notes installation into a new 24 in., 30 in., and 36 in. vanity sink base, with the ability to be cut down for 21 in., 27 in., and 33 in. cabinets. Before purchase, confirm your cabinet interior width and depth, plumbing layout, and whether the tray will be installed before the sink and countertop. Any load, compliance, or other technical details not listed here should be confirmed with the manufacturer or technical documentation.
What's included: Verified product data identifies a 12-pack configuration for the Rev-A-Shelf SBVDT-2124-S-12 vanity drip tray. Any mounting hardware or additional accessories should be confirmed before ordering.
What to verify before ordering: Confirm cabinet opening size, interior base dimensions, whether trimming is needed, and whether the vanity is new or already has the sink and countertop installed. Also confirm color, pack quantity, and that the tray size matches your intended cabinet application.
A sink cabinet drip tray is typically chosen by cabinet shops, installers, remodelers, and serious DIY buyers who want a simple protective layer under a vanity sink. In a bath vanity, small plumbing drips or minor supply line leaks can contact the cabinet floor first. A vanity cabinet drip tray creates a defined surface inside that base cabinet so the bottom panel is not the first point of contact.
This Rev-A-Shelf vanity drip tray is intended for that practical use. The verified product description states that it is designed to protect a sink cabinet from minor leaks. For buyers planning a new vanity install, that matters because the tray can be set in place during cabinet assembly or before the sink and top are installed. Rev-A-Shelf also notes that installation may be difficult after the sink and countertop are already installed, so this product is a better fit for planned new cabinetry work than for some retrofit jobs.
Fit is another common concern. This silver drip tray measures 22-1/2 in. wide by 20-1/4 in. deep by 3/4 in. high. The product line is designed for new 24 inch vanity sink base, 30 in., and 36 in. vanity sink base applications, and the tray can be cut down to fit 21 in., 27 in., and 33 in. cabinets. That cut to fit vanity tray detail is useful when the cabinet size is close but not exact. Buyers should still confirm actual interior cabinet dimensions and plumbing obstructions before trimming or installation.
The polystyrene drip tray material is also relevant for buyers who want a formed tray rather than a flat mat. If your project calls for a cabinet leak tray in a bath vanity, this product gives a clearly defined size, color, and intended use. If you need hardware, special fastening methods, or exact trimming guidance, those details should be verified with the manufacturer documentation before work begins.
When buyers compare a polystyrene drip tray with other cabinet liners or mats, the main differences usually come down to fit, intended cabinet size, and when the tray will be installed. A tray made for a vanity sink base gives a more application-specific starting point than a generic liner because the product data already identifies where it is meant to go and which cabinet sizes it can serve.
This Rev-A-Shelf vanity drip tray stands out in a practical way because the verified information is specific. The brand, series, color, dimensions, and intended cabinet sizes are all identified. That makes it easier for a buyer to match the tray to a new vanity cabinet schedule or a shop order. The SBVDT series drip tray format also helps when you need consistency across multiple installations, especially when ordering a 12-pack for repeated cabinet builds.
Another point in comparison is trim flexibility. Some buyers need a tray that starts with a known footprint and can then be adjusted. This product is described as able to be cut down for 21 in., 27 in., and 33 in. cabinets, which can help reduce guesswork when adapting to select vanity widths. Because the product data does not provide trimming instructions, edge details, or included hardware, those points should be checked before installation.
For many trade buyers, the deciding factor is not marketing language but whether the tray fits the cabinet, arrives in the needed pack quantity, and aligns with the install sequence. On those points, this vanity drip tray gives clear verified information: it is a Rev-A-Shelf polystyrene drip tray, it is silver, it measures 22-1/2 in. x 20-1/4 in. x 3/4 in., and it is recommended for new cabinetry where installation can happen before the sink and top are in place.
This Rev-A-Shelf vanity drip tray is sized for a new 24 in. vanity sink base and the product line is also described for new 30 in. and 36 in. vanity sink bases.
This sink cabinet drip tray can be cut down to fit 21 in., 27 in., and 33 in. cabinets according to the verified product description.
The Rev-A-Shelf SBVDT-2124-S-12 polystyrene drip tray measures 22-1/2 in. wide, 20-1/4 in. deep, and 3/4 in. high.
This vanity cabinet drip tray is recommended for new cabinetry. Rev-A-Shelf notes it may be difficult to install after the sink and countertop are installed.
The Rev-A-Shelf drip tray is made from polystyrene based on the verified product data.
This cabinet leak tray is the silver version of the SBVDT Series.
Manufacturer part SBVDT-2124-S-12 is identified in the product data as a 12-pack configuration.
Included hardware is not specified in the verified product data, so mounting components should be confirmed before ordering.
This vanity drip tray requires buyers to confirm cabinet interior size, plumbing clearance, and access because installation may be difficult after sink and countertop installation. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf vanity drip tray is a practical choice when you need a silver polystyrene tray for minor leak protection in a vanity sink base. Before purchase, confirm the 22-1/2 in. x 20-1/4 in. x 3/4 in. size, the 12-pack quantity, and whether your cabinet is a new install or a cut-to-fit application. Check cabinet interior dimensions, trim needs, and any hardware or installation details not listed in the verified product data so the tray matches your project the first time.
Sold In: 12 Each
