Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, giving cabinet doors a finished hinge detail that matches decorative hardware lines. This hinge is identified as a 2-1/2 x 2 hinge in PVD polished brass, so it suits small cabinet doors where a compact but substantial hinge is preferred. The hinge is classified as a full mortise hinge and a semi-concealed hinge, so most of the leaf is set into the cabinet and door while part of the hinge remains visible for a traditional look. The product is part of the Deltana Enterprises, Inc. hinge line, giving consistency with other Deltana components on the same installation. The hinge belongs to the Full Mortise Hinges category, so it works where the door and frame are machined for a flush, mortised fit.
The mounting type listed as full mortise means both leaves are cut into the cabinet and door edges, so the door edge and face-frame or cabinet side line up more evenly after installation. The square corners specification supports simple, straight-edged mortise layouts using hand tools or square-corner routing templates. The hole count of six in the hinge distributes fastening points along both leaves, which helps the hinge sit flat and resist twisting during door movement. The 0.093 inch hinge thickness influences the depth of the mortise, so routing or chiseling to that leaf thickness helps the hinge barrel sit correctly relative to the door gap. The wood screw detail of #7 x 3/4 inch establishes an intended screw gage and length, guiding drill bit selection and pilot depth for holding power in typical cabinet stock.
The SAP description lists this product as a 2-1/2 x 2 hinge, so it suits cabinet doors sized for a compact hinge footprint rather than full-size residential entry doors. Being in the Full Mortise Hinges category, it aligns with cabinet builds where the hinge is recessed into both the door and frame for a cleaner edge line. The semi-concealed hinge class means part of the hardware remains visible, which fits projects where hardware is a design element rather than hidden. The PVD polished brass finish supports use on cabinets where a brass visual is desired across knobs, pulls, and hinges. Because Deltana solid brass cabinet hinges are designed as cabinet hinges, they are oriented toward furniture, built-ins, and casework rather than structural doors.
The Deltana full mortise cabinet hinge construction in solid brass provides a metal leaf that pairs well with traditional cabinet materials while offering the mass expected in a brass hinge. The PVD polished brass finish gives the hinge its polished brass appearance while providing a PVD surface that resists everyday handling, which helps the hinge maintain its color and sheen near frequently touched door edges. The presence of ball tip finials as standard shapes the pin ends into decorative points, so the exposed portions of this semi-concealed hinge read as finished details instead of plain barrels. The six-hole hinge pattern and 0.093 inch thickness work together to support the door on multiple fasteners and a thicker leaf section, helping the door track consistently over repeated openings. The #7 x 3/4 inch wood screw specification matches common cabinet construction thicknesses, helping the hinge seat securely in typical cabinet rails and stiles without over-penetrating standard stock dimensions.
The CH2520CR003 is a Deltana solid brass cabinet hinge classified as a full mortise, semi-concealed hinge, so it is designed for mortised cabinet door installations where part of the hinge remains visible.
The hinge is described as a 2-1/2 x 2 hinge, so it is sized for cabinet applications needing a compact hinge footprint instead of a full-size door hinge.
The hinge is listed as PVD polished brass, so it presents a polished brass look with a PVD coating that helps the finish hold up under regular cabinet use.
The Deltana CH2520CR003 uses a full mortise mounting type, so both leaves recess into the cabinet and door edges to create a flush-mounted hinge installation.
The hinge leaf thickness is specified as 0.093 inch, so mortises can be cut to that depth to seat the leaves flush while keeping a sturdy section of solid brass supporting the door.
The web description lists #7 x 3/4 inch wood screw, so drilling pilots for that screw size helps clamp the 0.093 inch hinge leaves tightly to typical cabinet stock.
This Deltana solid brass cabinet hinge in PVD polished brass combines a 2-1/2 x 2 footprint with full mortise mounting, square corners, and six hinge holes, giving cabinetmakers a compact hinge that matches traditional brass hardware. The semi-concealed classification with ball tip finials as standard makes the visible portion read as intentional trim on face frames and cabinet doors. With a 0.093 inch hinge thickness and #7 x 3/4 inch wood screw reference, this hinge suits cabinet doors where a solid brass leaf and defined screw gage support long-term door use on furniture or built-ins.