Deltana solid brass cabinet hinges are cabinet hinges that use solid brass construction with an oil rubbed bronze finish, so they provide a specific visual match while offering the weight and feel associated with brass hardware on cabinet doors. As semi-concealed hinges in the Full Mortise Hinges category, they sit into a mortised cutout while leaving part of the hinge visible, which helps keep door gaps predictable on face-frame cabinets while still showing the decorative ball tip finials. The 2-1/2 inch by 2 inch hinge size defines the leaf dimensions, so installers can plan consistent mortise sizes and door edge layouts across a run of cabinets. The square corners on the full mortise design mean corner cuts stay simple and straight, which speeds routing or chiseling when fitting multiple doors in a shop environment.
The 2-1/2 inch by 2 inch size of this solid brass full mortise hinge sets the footprint on both door and frame, so hinge layout on rail and stile intersections can be repeated across a job without recalculating clearances. With square corners specified for the full mortise profile, installers can run a straight router pass and then square corners if desired, which streamlines hinge preparation on production cabinet runs. The .093 inch hinge thickness defines the mortise depth, allowing jigs or stops to be set once so each hinge leaf sits flush and supports free swinging motion. The specified #7 x 3/4 inch wood screw callout aligns the hinge with typical cabinet door and frame thicknesses, giving predictable thread engagement where the hinge knuckles carry the door movement.
This product is identified as Deltana Free Swinging Full Mortise Hinges, Screw-on Oil Rubbed Bronze - CH2520U10B, placing it in the Semi-Concealed Hinges product class for cabinet applications. The mounting type specified as full mortise positions this hinge for doors where the leaf is cut into both the cabinet and door edge, supporting a controlled swing arc on cabinet installations. Being described as Deltana solid brass cabinet hinges ties the hinge directly to cabinet door use, so its size and proportions align with typical cabinet stile and rail dimensions rather than larger architectural doors. The square corners on the mortise profile suit straight-edged cabinet parts, letting shops use simple jigs when cutting recesses on multiple doors and frames in a production workflow.
The combination of 2-1/2 inch by 2 inch dimensions and .093 inch thickness gives consistent geometry from hinge to hinge, so once a mortise depth and layout are dialed in, fabricators can cut every location the same and expect doors to hang with uniform reveals. The free swinging nature of the hinge, supported by the mortised installation, allows the door to move through its arc without binding on the frame, which is important when multiple hinges share the load on taller cabinet doors. The #7 x 3/4 inch wood screw specification standardizes fastener sizing at each hinge location, letting installers use the same pilot drill and driving pattern on both door and frame for predictable holding strength. Ball tip finials as standard on these cabinet hinges present a finished hinge end wherever the knuckle is visible, which supports a consistent, detailed appearance across all semi-concealed hinge points in a room. The oil rubbed bronze finish on the solid brass construction ties hinge color and tone into bronze-focused design schemes, so hardware seen at the edge of the door supports the overall look of the cabinet installation.
The CH2520U10B is a Deltana solid brass cabinet hinge in the Semi-Concealed Hinges product class, so it is intended for cabinet door applications where part of the hinge remains visible.
The full mortise mounting type means both leaves sit in recesses in door and cabinet, which sets the door flush to the frame plane and helps maintain consistent reveals along cabinet runs.
The 2-1/2 inch by 2 inch size defines each hinge leaf footprint, giving installers a clear template for mortise layout on cabinet doors and frames so hinge locations repeat accurately.
The .093 inch hinge thickness sets the mortise depth, allowing fabricators to set tooling once so each hinge leaf beds flush, which helps the door swing freely without rubbing.
The #7 x 3/4 inch wood screw specification defines the fastener size used with the hinge, guiding pilot hole selection and supporting suitable thread engagement in cabinet materials.
The oil rubbed bronze finish on the solid brass cabinet hinge provides a dark, aged appearance, helping the visible hinge portions coordinate with other bronze-colored cabinet hardware.
The Deltana Free Swinging Full Mortise Hinges, Screw-on Oil Rubbed Bronze - CH2520U10B combine solid brass cabinet construction, a 2-1/2 inch by 2 inch footprint, and .093 inch thickness, giving installers predictable geometry for mortised cabinet doors. With full mortise mounting, square corners, and #7 x 3/4 inch wood screw sizing, these semi-concealed hinges align with typical cabinet workflows where repeatable cuts and consistent reveals matter. The oil rubbed bronze finish and ball tip finials contribute to the visible portion of the hinge on face-frame cabinets, so the hardware supports both functional swing and finished appearance on cabinet jobs.