Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, giving cabinet doors a finished look that matches decorative hardware and keeps the hinge style consistent across a project. The 2-1/2 inch x 2 inch hinge size keeps this hinge scaled for cabinet doors rather than full-size doors, which helps doors swing freely without overpowering smaller face frames. The antique brass finish ties into traditional and classic cabinet designs, so the hinge appearance supports the overall style of built-ins or casework. As a semi-concealed hinge in the Full Mortise Hinges category, it sits into the cabinet and door edges, leaving only the decorative portion exposed and keeping lines cleaner on the cabinet face.
The mounting type Full Mortise means both leaves are set flush into the cabinet and door edges, which establishes a predictable reference line when aligning multiple doors on the same run. Square corners on the hinge match straight-routed pockets, so a standard straight bit can be used without corner chiseling. The 2-1/2 inch by 2 inch layout defines the mortise size, helping layout work stay consistent across a bank of doors. With 6 screw holes sized for #7 x 3/4 inch wood screws, each hinge can be secured into typical cabinet stock thickness while maintaining bite into solid material. The .093 inch thickness helps the hinge sit firmly in the mortise without telegraphing movement, supporting repeatable reveals.
This hinge is listed under Semi-Concealed Hinges and Full Mortise Hinges, so part of the hinge is recessed while a portion remains visible on the cabinet, which suits face-frame and casework where a decorative hinge edge is desired. The antique brass finish pairs with traditional cabinet colors and trim, tying the hinge into door pulls and other brass details. The 2-1/2 inch x 2 inch size keeps the hinge appropriate for cabinet-scale doors, supporting typical kitchen, bath, or built-in cabinets where door weights and sizes match this footprint. Because it is a free swinging hinge, doors move without built-in closing force, which suits applications where separate catches or hardware manage door retention.
The Full Mortise mounting style on the CH2520U5 cabinet hinge establishes a clear mortise depth and outline, helping jigs or templates deliver the same pocket every time across multiple cabinets. Square corners work with straight-bit routing, reducing layout time and keeping corner profiles sharp for a tight fit around the hinge leaf. The .093 inch hinge thickness gives a consistent material reference when setting router depth, which helps avoid doors rubbing on frames due to shallow pockets. With 6 screw holes sized for #7 x 3/4 inch wood screws, the hinge achieves multiple fastening points in both the door and cabinet, which helps keep the leaf from creeping under door weight. Solid brass construction provides a stable base at the knuckle, supporting free swinging action at the pin area through repeated opening and closing. The ball tip finials at the ends of the hinge knuckle define the visual termination of the barrel, giving the cabinet edge a finished appearance once doors are hung.
The Deltana CH2520U5 cabinet hinge is 2-1/2 inches by 2 inches, so mortises and door layouts can be planned around that footprint on cabinet-scale doors.
The full mortise mounting type sets both leaves flush into routed pockets, creating a consistent reference surface that supports even reveals and door alignment across multiple cabinets.
The CH2520U5 hinge has square corners, so routed pockets can follow straight-line corners without radius cleanup, simplifying mortising on doors and cabinet frames.
The CH2520U5 hinge has a thickness of .093 inch, giving the leaves enough section strength to stay stable in the mortise and support free swinging doors.
The hinge is specified with #7 x 3/4 inch wood screws, so the screw length and gauge are suited to typical cabinet door and frame stock thicknesses.
The ball tip finials on these solid brass cabinet hinges cap the hinge knuckle with a rounded detail, adding a traditional finished look to cabinet door edges.
The CH2520U5 hinge from Deltana Enterprises, Inc. combines a 2-1/2 inch x 2 inch full mortise layout, square corners, and .093 inch thick solid brass leaves, which supports stable cabinet door hanging on routed mortises. The antique brass finish and standard ball tip finials align with traditional cabinet styles, so doors carry a consistent visual line from hinge barrel to knob or pull. With 6 holes configured for #7 x 3/4 inch wood screws, each hinge gains multiple fastening points into cabinet and door stock, which supports long-term swing performance on regularly used cabinets.