Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so this CH2520U15A hinge provides a finished look while handling typical cabinet door movement in everyday shop or jobsite use. The 2-1/2 inch by 2 inch hinge size sets a compact footprint that suits smaller cabinet doors where a full-size door hinge would be oversized, helping keep margins and reveals consistent. As a semi-concealed hinge in the full mortise hinge category, it seats into the cabinet and door so the leaves sit flush, supporting a clean layout on face-frame cabinetry. The antique nickel finish delivers an established, muted tone that fits well with other antique nickel hardware in the same project, simplifying visual coordination. Because the hinges are solid brass, they offer the inherent rigidity of brass construction for repeated opening and closing in normal cabinet use.
The full mortise mounting type on this Deltana solid brass cabinet hinge means both leaves are recessed into the door edge and cabinet frame, helping the door surface sit close to the frame for a controlled reveal. Its 2-1/2 inch by 2 inch dimensions let installers plan hinge spacing on smaller doors without overcrowding the stile, supporting clear hinge placement in line with other door hardware. The square corners work with straight-cut mortises, so layout marks translate directly into material removal without needing to radius the pocket, saving steps in a production or retrofit workflow. With six screw holes and the specified #7 x 3/4 inch wood screws, each hinge can be anchored firmly into typical cabinet materials, helping reduce leaf movement that could throw off alignment over time.
The CH2520U15A part, described as a 2-1/2 inch by 2 inch hinge in antique nickel, fits cabinet work where a compact solid brass hinge is needed to support smaller doors while coordinating with antique nickel knobs and pulls. As a semi-concealed hinge in the full mortise hinge class, it suits face-frame or similar cabinet constructions that call for a mostly hidden hinge with a traditional ball tip finial visible, giving a familiar profile on upper and base cabinets. The square corner format lines up with mortises cut on jigs that produce straight-edged pockets, which can streamline repetitive installations across a bank of doors. Because Deltana solid brass cabinet hinges are offered in an array of fine finishes, this antique nickel version can be selected to match other antique nickel pieces within the same hardware schedule.
The solid brass construction of this full mortise hinge provides a stable leaf thickness of 0.093 inch, which sets a clear target for mortise depth so installers can repeat the same cut on every door and frame pair. The 2-1/2 inch by 2 inch dimensions define the hinge footprint, allowing hinge locations to be laid out once on templates and then reproduced across multiple cabinets, which helps maintain uniform reveals from unit to unit. Six mounting holes specified with #7 x 3/4 inch wood screws give each hinge a balanced fastener pattern, which helps keep the hinge seated tightly in its mortise during regular cabinet use. The antique nickel finish on a solid brass base combines finish color control with the underlying brass structure, so the visible ball tip finials and knuckles present a consistent appearance alongside other antique nickel cabinet hardware components.
The CH2520U15A is a Deltana solid brass cabinet hinge described as a full mortise hinge in the semi-concealed hinge class, so it suits recessed cabinet door installations.
The hinge is described as 2-1/2 inch by 2 inch, which sets the leaf size and helps with planning mortise layout and hinge spacing on cabinet doors.
The full mortise mounting type means both leaves sit recessed into door and frame pockets, supporting a flush fit and controlled reveal on cabinet doors.
This hinge is solid brass with an antique nickel finish, pairing brass construction with a muted antique nickel appearance for coordinating cabinet hardware.
Square corners match straight-edged mortises cut with chisels or templates, so pocket layout transfers directly and speeds repetitive cabinet hinge installations.
The hinge uses #7 x 3/4 inch wood screws, which suit typical cabinet door and frame thicknesses so the fasteners bite securely into the material.
The Deltana solid brass cabinet hinges in antique nickel, part CH2520U15A, combine a 2-1/2 inch by 2 inch full mortise design with square corners, six mounting holes, and #7 x 3/4 inch wood screws for cabinet doors laid out to these dimensions. When a project calls for semi-concealed solid brass full mortise hinges in an antique nickel finish, this hinge offers the defined sizing and mounting details needed to plan mortises, fastener positions, and visual coordination across multiple cabinets.