Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so the CH2520U15 hinge presents a finished look while carrying the door pivot, which keeps face-frame cabinets looking consistent from job to job. The 2-1/2" x 2" hinge size sets a predictable footprint on cabinet doors and frames, which simplifies layout when repeating the same hinge across multiple openings. The satin nickel finish gives a neutral, project-friendly appearance over the solid brass base, which suits a wide range of cabinet colors without calling attention to the hardware. This hinge belongs to the semi-concealed hinges product class with a full mortise mounting type, so part of the leaf sits in a cutout while part remains visible, which balances concealment with easy alignment on the frame.
The CH2520U15 hinge is specified as a full mortise type, so both the door and frame receive pockets matching the 2-1/2" x 2" leaf size, which lets the knuckle sit on the edge while the leaves sit flush with the cabinet surfaces. With square corners noted for this hinge, each mortise can be cut with straight passes and squared off, which suits production routing or careful hand work on a small run. The .093" thickness value gives a precise target when setting bit depth, which helps keep door edges flush with the face frame once the hinge is seated. Because the hinge is identified as a solid brass cabinet hinge with ball tip finials as standard, the visible portion at the knuckle presents a consistent traditional detail while the working leaves remain largely recessed in the wood.
The SAP description lists this product as a 2-1/2" x 2" hinge in satin nickel, so it lines up naturally with cabinet doors sized for compact hinges rather than full-height architectural plates, which keeps the scale appropriate on smaller doors. As a solid brass cabinet hinge in the semi-concealed hinges product class, it suits cabinet applications where part of the hinge is meant to show while most of the leaf sits in a mortise, which keeps the look lighter than a fully surface-mounted hinge. The satin nickel finish described in the SAP and product naming provides a subdued metallic tone over the brass, which coordinates with other satin nickel cabinet hardware in the same space.
The mounting type being full mortise gives a fixed relationship between the hinge barrel and the door edge once the mortises match the 2-1/2" x 2" outline, which supports repeatable reveals when the same layout is used across multiple cabinets. Square corners specified for this hinge mean each corner stays true to ninety degrees, which simplifies jig design for routing and reduces layout complexity when transferring patterns. The .093" hinge thickness value, combined with the 2-1/2" x 2" footprint, defines the material removed from the frame and door, which helps doors sit consistently relative to the face frame. The #7 x 3/4" wood screw hole specification sets reasonable engagement into typical cabinet door and face-frame stock, which supports holding strength appropriate to a small solid brass cabinet hinge without overdriving into thinner materials.
The CH2520U15 is a Deltana solid brass cabinet hinge in the semi-concealed hinges product class, so part of the hinge is visible while the working leaves sit in mortises on cabinet applications.
The CH2520U15 hinge has a full mortise mounting type, so matching pockets are cut in the cabinet door and frame for the leaves, keeping the hinge face roughly flush with the wood surfaces.
The Deltana solid brass cabinet hinge is specified as 2-1/2" x 2", which defines the leaf size and helps plan mortise dimensions and hinge spacing on cabinet doors and frames.
The CH2520U15 hinge has square corners, so mortises follow straight lines and squared corners, which suits jigs that cut rectangular pockets for consistent cabinet hinge placement.
The CH2520U15 is a solid brass cabinet hinge with a satin nickel finish, combining a brass base with a muted nickel appearance that coordinates with other satin nickel cabinet hardware.
The CH2520U15 hinge is specified with #7 x 3/4" wood screw holes, so the hole pattern is sized for that screw dimension in typical cabinet door and face-frame materials.
The CH2520U15 Deltana full mortise hinge combines a 2-1/2" x 2" solid brass cabinet hinge body with a satin nickel finish, so the size, material, and appearance align with typical cabinet door projects. With square corners, .093" leaf thickness, and #7 x 3/4" wood screw holes specified, the hinge gives clear targets for mortising depth, layout, and screw selection on face-frame and cabinet assemblies. For projects calling for a semi-concealed hinge look with ball tip finials as standard in a satin nickel tone, this hinge provides a defined spec set for planning and executing cabinet hinge work.