Deltana solid brass cabinet hinges give a cabinetmaker a small-format hinge that is built from solid brass, so the leaf resists deformation during normal cabinet use and helps keep doors tracking consistently over time. These hinges are described as cabinet hinges, which aligns them with doors and frames in typical cabinet construction rather than heavy architectural doors. The polished nickel finish provides a bright, plated surface that visually matches other polished nickel cabinet hardware, allowing a cleaner, unified look across doors and drawer fronts. Ball tip finials are standard on these hinges, so the exposed hinge tips present a finished detail that suits projects where hinge ends remain visible on the face frame. The free swinging, full mortise design supports normal door opening without spring resistance, which suits applications where the door is meant to move freely and rest on its own.
The mounting type listed as full mortise means both hinge leaves sit into cutouts in the cabinet door and frame, bringing the barrel to the edge and giving a neat reveal around the opening. Square corners on the hinge match square mortises, so a shop can cut pockets with straight router passes and clean them with chisels without radiusing the corners. Wood screw sizing is specified as #7 x 3/4 inch, giving a length that bites into typical cabinet door and frame stock without penetrating through most common thicknesses. The hinge uses 6 screw holes, so each leaf gains multiple attachment points into wood, spreading door weight across several fasteners and reducing stress on any single point. The free swinging design works with this mounting style to let the door open and close smoothly without added closing force.
This product is classified under Semi-Concealed Hinges, indicating that part of the hinge is visible during use while the mortised sections sit within the wood. That construction suits cabinet doors where the barrel and ball tip finials are meant to be a visual detail at the frame edge, while the rest of the hardware remains recessed. The category path identifies it as a Full Mortise Hinge within a semi-concealed face-frame hinge family, tying it directly to face-frame cabinet construction rather than frameless hardware systems. As a cabinet hinge built from solid brass, it is aimed at woodworking applications where brass is preferred for its machining qualities and traditional appearance. The 2-1/2 inch by 2 inch proportions align with smaller to medium cabinet doors, such as upper cabinets, built-ins, or furniture-style cases.
The solid brass construction used on these Deltana cabinet hinges provides a dense base metal that accepts the polished nickel finish cleanly, which helps the hinge present an even surface along visible edges and ball tip finials. The listed thickness of .093 inch gives the leaves more material at the knuckle and along the load path, supporting stability when doors are opened and closed repeatedly. Full mortise mounting lets the door close into the frame without the hinge leaf sitting proud, which supports clean reveals and reduces snag points along cabinet faces. Square corners on the hinge simplify replication across multiple openings in a production run because mortises can be cut with consistent straight walls that match the hinge outline. The 6-hole pattern on the hinge leaf allows installers to pattern screws in a predictable layout on both the door and frame, which simplifies drilling and helps maintain alignment from cabinet to cabinet in a larger project.
The CH2520U14 is a Deltana solid brass cabinet hinge described as a free swinging, full mortise hinge, so it mounts in mortised pockets and allows cabinet doors to move without spring tension.
The hinge is listed as 2-1/2 inch by 2 inch, which suits cabinet doors that match this compact hinge size for proportionate support at the stile and frame.
The hinge uses a full mortise mounting type with square corners, so it is set into square-cut recesses in the door and frame for a flush, traditional cabinet fit.
This hinge is described as a Deltana solid brass cabinet hinge with a polished nickel finish, giving a brass base metal with a bright plated surface that matches other polished nickel hardware.
The hinge thickness is .093 inch, which provides a substantial leaf section that supports door movement while helping retain alignment under regular cabinet use.
The hinge is specified with #7 x 3/4 inch wood screws, so the fasteners are sized to bite into typical cabinet stock while remaining short enough for common door and frame thicknesses.
The CH2520U14 Deltana solid brass cabinet hinge combines a 2-1/2 inch by 2 inch format, full mortise mounting, and a polished nickel finish for cabinet and furniture applications that call for semi-concealed brass hardware. The square-corner design and 6-hole pattern support repeatable mortising and fastening when installing multiple doors in a shop setting. For cabinet builds or upgrades that match this size, material, and mounting style, this hinge provides a defined option within Deltana Enterprises, Inc. offerings through Wurth Baer Supply.