Kuehn Bevel edge moldings in the KURV 4 Series provide a seamless one piece molding that creates finished edges on laminate, solid surfaces, or wood, so exposed core material stays covered and the project reads as one continuous surface. The 3692 Labrador Granite matte finish ties into Labrador Granite designs, so edges carry the same visual language as the main surface for a unified look. Soft eased curves at the beveled points form a subtle double Kurv profile, which breaks sharp transitions and gives a softer bullnose-style edge that is more comfortable to touch along working or seating edges. The 12' length supports longer countertop, desk, or run applications with fewer joints, helping maintain visual continuity along the full span. The molding size of 1-9/16" wide by 5/16" thick defines an edge band that can visually balance typical top thicknesses and provide a defined decorative reveal along the front.
This KURV 4 bevel edge molding measures 1-9/16" in width, giving enough face to cover the front build-up zone on many laminate or wood tops while presenting a defined decorative band. The 5/16" thickness sets the projection of the molding profile, so the edge steps out from the substrate with a consistent reveal that can be planned into top build-ups or trim layouts. The stocked subtle double Kurv shape creates a soft bullnose edge, so the transition from horizontal surface to vertical face follows a controlled radius rather than a sharp corner. Because the molding is a seamless one piece design, the entire width and thickness of the profile works together as a single component, which simplifies aligning the sculpted curves relative to the top surface.
The KURV 4 bevel edge Labrador Granite molding is suited to projects that use laminate, solid surfaces, or wood where a decorative and protective edge is required, so one profile can serve across mixed materials in the same installation. The Labrador Granite 3692 matte finish supports use alongside matching Labrador Granite laminate designs for coordinated countertops, or as a contrasting trim against other surface colors. Kuehn Bevel describes this product as part of its laminate edge moldings category, which positions it for edge treatment on tops, panels, or trim where laminate finishes are part of the design palette. The molding can also build decorative backsplashes, where the continuous 12' length allows long runs above counters or work tables with a consistent edge line. In addition, it can form baseboard molding or chair rail details, extending the same profile and color band through vertical wall treatments for visual continuity in a room.
The seamless one piece molding construction means the sculpted KURV 4 profile, from top radius through face, is formed as a single component, helping keep the decorative shape consistent without separate built-up parts. Soft eased curves at the beveled points guide the eye smoothly from the horizontal plane of a top to the vertical face, which can moderate visual shadows along the front edge and deliver a more refined transition. The subtle double Kurv that creates the soft bullnose effect provides two gentle directional changes in the profile, which can help the edge read as a finished molding rather than a simple square band. With moisture resistant MDF as the core material, the profile remains uniform along the 12' length within typical shop and interior conditions, supporting repeatable results when multiple pieces are used in the same project. The ability to create matching or contrasting edges on laminate, solid surfaces, or wood means the same edge style can be repeated across tops, backsplashes, baseboard molding, and chair rail applications, creating a cohesive trim language that reduces the need to mix unrelated profiles.
The KURV 4 bevel edge molding creates matching or contrasting edges on laminate, solid surfaces, or wood, so exposed edges gain a finished decorative profile across countertops, trim, and similar projects.
Each Kuehn Bevel edge molding in this product is a 12' length, which spans extended runs such as countertops, backsplashes, or base details with fewer joints along the profile.
This Labrador Granite 3692-58-KURV4 molding measures 1-9/16 inches wide by 5/16 inch thick, defining the visible band height and projection used in trim layouts and top build-ups.
The subtle double Kurv soft bullnose creates gentle curves at the edge, which softens transitions and touch points along front edges of tops, chair rails, or backsplash terminations.
The KURV 4 edge molding is made of moisture resistant MDF, providing a stable core for laminate edge applications in typical woodworking environments and helping maintain a consistent molded profile.
This Kuehn Bevel product can build decorative backsplash, baseboard molding, or chair rail, allowing the same Labrador Granite profile to carry across horizontal and vertical trim locations.
The KURV 4 bevel edge Labrador Granite molding combines a seamless one piece laminate edge profile with a 12' length, so long edges on laminate, solid surfaces, or wood can follow one continuous sculpted line. The 1-9/16" by 5/16" dimensions, subtle double Kurv soft bullnose, and moisture resistant MDF construction define how it will present and perform across countertops, backsplashes, baseboard molding, or chair rail trim. For projects built around Labrador Granite designs or contrasting accent bands, this Kuehn Bevel edge molding provides a defined way to carry that finish through the critical edge zones.
Sold In: 1 Each