ZBox 6423 Drawer Slide For Metal Sides

ZBox 6423 drawer slide is an integrated side mount ball bearing drawer slide and metal drawer side that creates a matched system, so the slide and drawer side work together as one component in the cabinet. The 18-1/2 inch length described as 18-1/2 length ZBox sets the basic cabinet depth this component is designed to support, which matters when planning case construction around standard depths. The 9 inch height listed as 9 height defines the metal drawer side height, which helps set the usable drawer interior and front layout in a run of cabinets. The drawer side has a white epoxy finish, giving a uniform white appearance on the metal side that can coordinate with light-colored interiors. The drawer slide is manufactured from zinc coated steel, so the slide member carries a corrosion-resistant coated surface where it mounts to the cabinet.

Job-Focused Details Of This ZBox Assembly

• The ZBox system combines the drawer slide and metal drawer side in one Grass Zbox drawer system, simplifying drawer design because the runner and side are engineered as a matched set.
• Ball bearing telescopic full extension design allows the drawer to travel fully out to its rated extension, exposing the drawer contents to the front edge for easy reach during normal cabinet use.
• Continuous bearings ensure smooth running performance, so the drawer movement stays even along the travel path and resists sticking in regular residential or shop environments.
• A hold-in detent ensures drawers stay closed at the back of the slide travel, which helps keep fronts aligned and reduces unintended opening in typical cabinet installations.
• Easy lever disconnect provides removal of the drawer box from the cabinet member, which speeds up installation, adjustment, and later service work on the case interior.
• The integrated drawer side and slide are part of the Grass ZBox drawer system product class, which places this component within a coordinated drawer construction system used for metal-sided drawers.

Installation And Mounting Details For ZBox 6423

This ZBox 6423 drawer slide uses side mount ball bearing construction, so the cabinet member fastens along the cabinet side and supports the metal drawer side as part of a side-mounted runner layout. Frameless or face frame application listed for this system means it is suitable for use in frameless cases or in face frame cabinetry layouts when mounted correctly in relation to the opening. A front slotted hole for face frame mounting provides an elongated slot at the front attachment point, so the slide position at the face frame can be shifted slightly for alignment during installation. A face frame rear mounting bracket is available for this system, which supports the back of the slide when used in face frame cabinets where a rear mounting surface is needed.

Using The Grass ZBox System In Cabinet Work

Where This Grass ZBox Drawer System Fits

This Grass ZBox drawer system belongs to the Grass Zbox Drawer Systems category, positioning it as part of a dedicated metal drawer construction approach for cabinetry. The Zargen component is made in the USA and ZBox is assembled in the USA, placing manufacturing and assembly within US facilities, which matters for projects that prioritize domestic production sources. The system sets described as system sets with left and right cabinet members and left and right drawer sides create a paired arrangement, so each drawer uses matched left and right parts during assembly. This integrated side and runner approach supports drawer construction in cabinet shops that work with metal drawer sides rather than separate wooden sides and generic slides. The 18-1/2 inch length aligns with typical base cabinet depths, allowing designers to plan case dimensions around this standard runner length while keeping consistent geometry across a project run.

Why These ZBox Details Support Reliable Results

The load capacity of 100 lb stated for this ZBox 6423 drawer slide defines the rated load the slide system is designed to carry, which sets expectations for loading drawers with typical cabinet contents within that range. Cam height adjustment of plus or minus 2 mm allows vertical tuning of the drawer position at the front, which helps fine-tune reveal lines between adjacent drawer fronts. Side adjustment of plus or minus 1.5 mm supports lateral movement of the drawer front, enabling alignment of gaps so fronts sit evenly in the opening. Continuous bearings working along the telescopic full extension movement distribute loads across multiple bearing points, which contributes to consistent feel and helps maintain alignment under use. The drawer side white epoxy finish over the metal surface also provides a coated side wall that can visually coordinate across a bank of drawers. The product is offered by Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry, aligning this ZBox system with professional cabinet and woodworking workflows.

Common Questions About This ZBox Drawer Slide

Selecting This ZBox 6423 For Your Project

The ZBox 6423 drawer slide with 100 lb capacity, full extension, 9 inch height, white epoxy finish, and 18-1/2 inch length provides a defined set of dimensions and adjustments that suit metal-sided drawer construction. The frameless or face frame application flexibility, combined with cam height and side adjustments, supports fine-tuned reveals across a bank of fronts. Continuous bearings, hold-in detent, and easy lever disconnect contribute to a practical working drawer system for shop-built cabinetry. For projects designed around the Grass ZBox drawer system, this component offers the stated performance and geometry needed to plan and execute drawer runs efficiently.