ZBox 6223 Drawer Slide with 100lb Capacity, Full Extension, 6", White Epoxy, 18
Description
ZBox 6223 Drawer Slide For Built-In Drawers
ZBox 6223 drawer slide is an integrated side mount ball bearing drawer slide and metal drawer side designed as a complete drawer construction system, so you build drawers and runners together as one matched assembly. The 18-1/2 inch length targets cabinets where standard-depth drawers are needed, helping maintain consistent layouts across a run. The 6 inch drawer side height sets a defined side profile, which helps control clearances for stored items and drawer fronts. A white epoxy finish on the drawer side establishes a clean, neutral appearance that suits many cabinet styles while offering a smooth side surface. The drawer slide in zinc coated steel pairs with the metal side, bringing a uniform, rigid structure that supports the rated performance. This configuration gives installers one coordinated Grass Zbox drawer system component instead of separate, mismatched parts.
Key ZBox Slide Details That Support Daily Use
- The full extension, ball bearing telescopic design brings the drawer fully out of the cabinet, improving access to stored items and simplifying adjustments at the back of the drawer during installation or service.
- A hold-in detent that keeps drawers closed helps resist unintended opening, which matters in busy shop, office, or residential environments where drawers are frequently used and alignment with fronts must stay consistent.
- Continuous bearings across the slide provide smooth running performance, so drawers travel evenly under load, reducing strain on fasteners and minimizing sticking or uneven motion over repeated cycles.
- The load capacity of 100 lb supports heavier drawer contents than light-duty systems, giving more flexibility for storing tools, hardware, or dense kitchen items without exceeding the rated performance of the slide set.
- Manufactured from cold rolled steel, the slide components start from uniform stock, supporting consistent tolerances and predictable behavior when mounted in cabinet sides or on face frames.
Installation Details For ZBox 6223 Drawer Slide
The integrated side mount design positions the drawer slide along the cabinet side, combining the runner and metal drawer side so installers work with a unified assembly rather than separate slides and panels. Frameless or face frame application support allows this Grass America ZBox 6223 drawer slide to be used across different cabinet construction methods, which simplifies planning when a project mixes cabinet types. A front slotted hole for face frame mounting gives some adjustability during installation, helping fine-tune position relative to the face frame. A face frame rear mounting bracket is available for rear support in face frame cabinets, which helps transfer load and maintain alignment across the full slide length. The easy lever disconnect lets the drawer box be removed from the cabinet member, aiding installation, finishing, and later access for adjustment or service.
Using This Grass ZBox Drawer System On Projects
Where The ZBox 6223 Slide Is Typically Applied
This Grass ZBox drawer system belongs to the Grass ZBOX Drawer Systems category, placing it in a product class built specifically for metal-sided drawer construction. The 18-1/2 inch length and 6 inch drawer side height suit cabinets that require a consistent drawer geometry, which is common in kitchen, bath, and shop casework where uniform lines matter. The 100 lb load capacity lets this ZBox 6223 drawer slide serve storage for hardware, cookware, or other dense items without changing to a heavier product class, helping keep one standard across a project. Its white epoxy drawer side finish works in applications where a light interior drawer color is preferred, supporting visibility of stored items and a cohesive cabinet look. Because the drawer side, ball bearing slide, and cabinet member are configured as an integrated system, each drawer built with this component follows the same layout, which streamlines fabrication and installation sequences.
Why The Verified ZBox Details Improve Workflow
The integrated side mount ball bearing drawer slide and metal drawer side design ties the drawer box and slide alignment together from the start, which reduces steps compared to building separate wooden boxes and then fitting slides. Full extension ball bearing telescopic travel lets installers pull the drawer completely out, making front adjustment, squareness checks, and hardware fitting easier at full reach. Cam height adjustment of plus or minus 2 mm allows front-to-back height tuning at the drawer, so small cabinet or floor variations can be compensated without rebuilding parts. Side adjustment of plus or minus 1.5 mm offers lateral fine-tuning, which helps achieve even reveals between fronts and reduces time spent shimming or remounting. The hold-in detent that ensures drawers stay closed supports consistent front alignment in banks of drawers, which reduces callbacks related to drifting or partially open drawers. Continuous bearings supporting smooth running performance lessen friction during operation, which is valuable when drawers are loaded near the 100 lb capacity. The cold rolled steel construction of the slide and zinc coated steel finish contribute to rigidity and manufactured accuracy, helping drawers track straight over time. Zargen is made in the USA and ZBox is assembled in the USA, which provides a defined manufacturing chain for specifying Grass America components in projects that reference domestic production.
Common ZBox 6223 Drawer Slide Questions
What type of drawer system is the ZBox 6223 drawer slide?
The ZBox 6223 drawer slide is part of the Grass ZBox Drawer Systems, combining a metal drawer side with a side mount ball bearing slide for integrated drawer construction.
How far does the ZBox 6223 drawer slide extend?
The ZBox 6223 drawer slide uses a ball bearing telescopic full extension design, allowing the drawer to travel fully out of the cabinet for complete access to contents.
What load can the ZBox 6223 drawer slide support?
The ZBox 6223 drawer slide has a load capacity of 100 lb, which supports heavier drawer contents such as tools, hardware, or cookware within that rated range.
How is the ZBox 6223 drawer slide mounted in cabinets?The ZBox 6223 drawer slide is a side mount system suitable for frameless or face frame applications, with a front slotted hole that supports face frame mounting adjustments.
What adjustments does the Grass ZBox 6223 drawer slide offer?
The Grass ZBox 6223 drawer slide provides cam height adjustment of plus or minus 2 mm and side adjustment of plus or minus 1.5 mm to fine-tune drawer front alignment.
What are the material and finish details of this ZBox drawer slide?
The ZBox 6223 drawer side has a white epoxy finish, while the drawer slide is zinc coated steel manufactured from cold rolled steel for consistent, smooth running performance.
Selecting This ZBox 6223 Slide For Your Job
The Grass America ZBox 6223 drawer slide with 18-1/2 inch length, 6 inch drawer side height, and 100 lb capacity offers a defined geometry and performance profile for cabinet projects. Its integrated side mount ball bearing slide and metal drawer side streamline drawer construction, while full extension travel and adjustable cams support precise alignment. For jobs built around Grass Zbox Drawer Systems, this component delivers a consistent white epoxy metal side and smooth running action that suit production and custom work. Use the verified dimensions, load rating, and application details to match this ZBox 6223 drawer slide to your planned cabinet layout and drawer configuration.
