ZBox 6423 Drawer Slide with 100lb Capacity, Full Extension, 9", White Epoxy, 22
Description
ZBox 6423 Drawer Slide For Metal Drawer Boxes
ZBox 6423 drawer slide defines this Grass America metal drawer solution as an integrated side mount ball bearing drawer slide and metal drawer side, so the slide and side work together as one system to speed construction and keep alignment consistent. The 21-5/8 inch length and 9 inch height match the SAP description, giving a fixed platform size that simplifies planning cabinet depths and drawer capacities. A load capacity of 100 lb sets a clear working limit, allowing typical drawer loads to operate within the slide design. The ball bearing telescopic full extension design lets the drawer travel fully out, which exposes the full drawer interior for access and hardware installation. Continuous bearings ensure smooth running performance, so drawers open and close with less resistance over the entire stroke. The drawer side has a white epoxy finish, while the drawer slide uses zinc coated steel, creating a visible white interior surface with a protected steel slide member.
Key ZBox Drawer System Details For Builders
- The integrated side mount ball bearing drawer slide and metal drawer side create a matched assembly, which removes separate side layout steps and supports straighter drawer construction.
- Ball bearing telescopic full extension allows the drawer to move fully out of the cabinet, giving working access to stored items and to the drawer box for adjustments or service.
- A hold-in detent ensures drawers stay closed, resisting light pull forces so the drawer remains in its closed position during regular cabinet use.
- Continuous bearings ensure smooth running performance, which helps keep motion consistent along the entire travel path and supports repeatable operation in daily use.
- The drawer side white epoxy finish combined with the drawer slide zinc coated steel provides a finished white interior side and protected steel components for the slide member.
- Manufactured from cold rolled steel, the system members provide a rigid structure that supports the stated 100 lb load capacity under normal drawer construction.
Mounting And Adjustment Setup For This ZBox
This Grass ZBox drawer system works for frameless or face frame application, so it can be used in different cabinet construction styles without changing the basic drawer components. A front slotted hole for face frame mounting on the cabinet member allows positional adjustment during installation, helping align the slide when working off a frame front. A face frame rear mounting bracket is available, which supports the back of the cabinet member when mounting to a face frame layout. Adjustments listed as cam height plus or minus 2 mm and side plus or minus 1.5 mm give defined ranges for tuning drawer front gaps and side clearances. The easy lever disconnect for removal of drawer box from cabinet member lets the drawer be separated from the cabinet slide, which simplifies installing drawer fronts, making depth tweaks, or transporting the cabinet.
Using The Grass ZBox 6423 In Cabinet Projects
Where This Grass ZBox Drawer Slide Fits Best
This ZBox 6423 drawer slide with 21-5/8 inch length and 9 inch height aligns with the SAP description of a 21-5/8 length ZBox, 9 height, white, so it suits drawer boxes designed to that size envelope. The integrated side mount ball bearing drawer slide and metal drawer side arrangement places the slide function directly into the drawer side, which is useful in Grass Zbox drawer system construction where a metal side wall defines the drawer box. Frameless or face frame application support lets this system appear in both European-style and traditional cabinet layouts, so a shop can use the same drawer system across different project types. The drawer side white epoxy finish presents a neutral white surface inside the cabinet, which can coordinate with light interior colors and highlight stored contents. Zargen is made in the USA and ZBox is assembled in the USA, positioning this system within Grass America production and assembly workflow.
Why These ZBox Details Support Repeatable Results
The load capacity of 100 lb gives a defined design boundary, so drawer layouts, material choices, and intended contents can be planned within the slide rating for regular cabinet drawers. Ball bearing telescopic full extension combined with continuous bearings helps the drawer travel uniformly from fully closed to fully open, which supports precise front reveals and easier alignment of drawer fronts across a bank of cabinets. The hold-in detent that ensures drawers stay closed reduces unintended opening, helping maintain consistent front alignment after the drawer is pushed shut. Cam height adjustment of plus or minus 2 mm, together with side adjustment of plus or minus 1.5 mm, provides measurable tuning ability so installers can dial in even gaps around the drawer front. The easy lever disconnect for removal of drawer box from cabinet member allows drawers to be lifted off the slide members, which simplifies tasks such as squaring the box, drilling pull hardware, or finishing inside the cabinet. Manufactured from cold rolled steel with a zinc coated steel slide component, this Grass Zbox drawer system maintains a rigid structure along the cabinet member, which supports the rated load while working with the integrated metal drawer side.
Common Questions About Grass ZBox 6423 Drawer Use
What type of drawer system is this ZBox 6423?
The ZBox 6423 drawer slide is an integrated side mount ball bearing drawer slide and metal drawer side, so it serves as both the drawer side wall and the slide mechanism in one Grass Zbox drawer system.
How much weight can this Grass ZBox drawer slide support?
This Grass ZBox drawer slide has a load capacity of 100 lb, which defines the working limit for planning typical drawer contents and helps keep the slide operating as designed under normal cabinet use.
Does this ZBox 6423 provide full extension of the drawer?
The ZBox 6423 uses a ball bearing telescopic full extension design, so the drawer can travel fully out of the cabinet, improving access to stored items and to the drawer box during adjustments.
What adjustment range does this Grass ZBox system offer?
This Grass ZBox system provides cam height adjustment of plus or minus 2 mm and side adjustment of plus or minus 1.5 mm, allowing fine tuning of drawer front alignment and side clearances after installation.
Can this ZBox 6423 be used in both frameless and face frame cabinets?
This ZBox 6423 works for frameless or face frame application, and it has a front slotted hole for face frame mounting to help align the cabinet member on framed cabinet fronts.
What are the finish details on the drawer side and slide member?
The drawer side uses a white epoxy finish, while the drawer slide is zinc coated steel, giving a white interior drawer side with protected steel on the cabinet slide component.
Selecting This Grass ZBox 6423 For Your Next Build
The Grass ZBox drawer system with ZBox 6423 drawer slide, 21-5/8 inch length, 9 inch height, and 100 lb load capacity offers an integrated side mount ball bearing drawer slide and metal drawer side for Grass America projects. With ball bearing telescopic full extension, continuous bearings, and adjustments of cam height plus or minus 2 mm and side plus or minus 1.5 mm, this metal drawer solution supports careful alignment and repeatable motion in frameless or face frame application. Choose this Grass Zbox drawer system setup when a white epoxy metal drawer side, zinc coated steel slide, and made-in-USA and assembled-in-USA ZBox construction align with cabinet design plans.
