Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
ZBox 6223 drawer slide is an integrated side mount ball bearing drawer slide and metal drawer side, so the slide and sidewall function as one component in a Grass Zbox drawer system. The 20-1/16 inch length is suited to cabinet layouts that need a 20 inch class drawer member, allowing consistent box depths across a run of cabinets. The 6 inch drawer side height sets the drawer wall height, helping keep contents contained at a practical level. A 100 lb load capacity lets the assembled drawer carry typical kitchen or shop loads while staying within the rated design. Full extension ball bearing telescopic action allows the drawer box to travel completely out to the front, providing clear access to stored items without hidden areas at the back. The drawer side uses a white epoxy finish, while the drawer slide uses zinc coated steel, giving a finished interior look with a cabinet member protected by zinc coating.
The ZBox 6223 drawer slide system uses side mount ball bearing members, so the cabinet member fits to the case side while the integrated metal drawer side forms the drawer box wall. Frameless or face frame application flexibility allows the same Zbox system to be used across different cabinet construction methods. A front slotted hole for face frame mounting provides an elongated screw location at the front, which helps set position on a face frame stile before final tightening. A face frame rear mounting bracket is available for this system, giving a defined support point at the back of a face frame cabinet. Adjustments use cam height plus or minus 2 mm and side plus or minus 1.5 mm, so small shifts in vertical and lateral position can be dialed in after mounting to fine-tune gaps and front alignment.
The 20-1/16 inch length of this ZBox 6223 drawer slide targets cabinet interiors designed for a 20 inch class drawer, matching common base cabinet depths while leaving space for back clearance. Within a Grass Zbox drawer system, the integrated metal drawer side defines the side height at 6 inches, creating a medium-height drawer suited to many base and utility applications. In frameless cabinets, the side mount ball bearing cabinet members fasten directly to the cabinet side panel, which suits system cabinet construction where the interior is already flush. In face frame cabinets, the front slotted hole for face frame mounting provides a defined interface at the frame, aligning the slide relative to the frame opening. The face frame rear mounting bracket that is available for this application extends the mounting surface to the back, giving the cabinet member support along its full length in a face frame layout.
The ball bearing telescopic full extension of the ZBox 6223 drawer slide lets the drawer box travel outward until the back nearly reaches the front edge, which helps installers set consistent reveals because the slide travel is controlled. Continuous bearings ensure smooth running performance along the full stroke, helping drawers operate uniformly even when loaded within the 100 lb capacity. The hold-in detent that ensures drawers stay closed adds resistance at the end of travel, supporting front alignment because the drawer rests consistently against the cabinet front when pushed to the closed position. Cam height adjustment of plus or minus 2 mm allows the front of the drawer box to be raised or lowered slightly relative to the slide, giving flexibility to align multiple drawers in a bank. Side adjustment of plus or minus 1.5 mm lets the drawer front be shifted laterally on the hardware interface, which is valuable for dialing in even side gaps. Construction from cold rolled steel, with drawer slide parts in zinc coated steel and drawer sides finished in white epoxy, provides a rigid metal structure with finishes suited to interior cabinet environments. Zargen is made in the USA and ZBox is assembled in the USA, which situates this Grass America system within domestic manufacturing and assembly for this drawer construction line.
ZBox 6223 drawer slide is an integrated side mount ball bearing drawer slide and metal drawer side within the Grass Zbox drawer system, so the hardware and sidewall act as one metal-sided drawer construction.
ZBox 6223 drawer slide has a 100 lb load capacity, which supports typical residential or light shop drawer contents when designing storage around the rated capacity.
ZBox 6223 drawer slide offers ball bearing telescopic full extension, so the drawer box can move fully out of the cabinet opening for direct access to items at the back.
ZBox 6223 drawer slide is specified for frameless or face frame application, giving flexibility to use the same Grass Zbox system across both cabinet construction styles.
ZBox 6223 drawer slide provides cam height adjustment of plus or minus 2 mm and side adjustment of plus or minus 1.5 mm, which supports fine-tuning drawer front position after mounting.
ZBox 6223 drawer slide components are manufactured from cold rolled steel, with the drawer side in a white epoxy finish and the drawer slide in zinc coated steel.
This ZBox 6223 drawer slide with 20-1/16 inch length, 6 inch metal drawer side height, and 100 lb capacity is suited to Grass Zbox drawer system layouts that call for full extension, ball bearing performance. The integrated side mount ball bearing drawer slide and metal drawer side design simplifies planning for metal-sided drawers in frameless or face frame cabinets. With cam height and side adjustments, cold rolled steel construction, and white epoxy and zinc coated steel finishes, this Grass America ZBox 6223 component supports precise, repeatable drawer results in system-based cabinet construction.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF30102-15 Mfr# 30102-15 | Grass America ZBox Rear Bracket, Zinc, 30102-15 |
