ZBox 6023 Drawer Slide with 100lb Capacity, Full Extension, 3-3/8", White Epoxy, 20

ZBox 6023 Drawer Slide For Metal Drawer Builds

ZBox 6023 drawer slide with 100lb capacity pairs an integrated side mount ball bearing drawer slide with a metal drawer side, so the runner and sidewall work as one system for building consistent drawers. The drawer side has a white epoxy finish, while the drawer slide uses zinc coated steel, giving a clean interior look with a protected running member for typical cabinet environments. Ball bearing telescopic full extension lets the drawer travel fully out to the 20-1/16 inch length, helping access the whole drawer. Continuous bearings ensure smooth running performance along the entire travel, which supports controlled movement under load. The hold-in detent keeps drawers closed until pulled, helping keep fronts aligned in everyday use. ZBox is assembled in the USA, which supports dependable production consistency for repeat installations.

Key ZBox 6023 Details That Support Your Build

• The integrated side mount ball bearing drawer slide and metal drawer side create a unified Grass Zbox drawer system, helping speed layout by combining slide and sidewall into one matched set.
• The ball bearing telescopic full extension action lets the 20-1/16 inch assembly open fully, so stored items are accessible across the full drawer depth without reaching into the cabinet.
• The hold-in detent that ensures drawers stay closed helps fronts sit flush under normal use, which is useful for banks of drawers where consistent reveals are important.
• Continuous bearings that ensure smooth running performance spread the load along the slide, helping the 100 lb capacity handle daily use without rough spots along the travel.
• The drawer side white epoxy finish with drawer slide zinc coated steel presents a neutral interior color while protecting steel components, which suits many cabinet styles.

Mounting And Adjustment For The ZBox 6023 Slide

This Grass America ZBox drawer system uses an integrated side mount ball bearing drawer slide, so it fits into side-mounted drawer planning rather than bottom-mount layouts. Frameless or face frame application is supported, letting the same 20-1/16 inch component serve across different cabinet constructions. A front slotted hole for face frame mounting gives some positioning flexibility at the front, which helps align drawer fronts across a run. Cam height plus or minus 2 mm and side plus or minus 1.5 mm adjustments allow fine tuning of the drawer front relative to the opening, helping tighten gaps and achieve parallel reveals.

Using The Grass ZBox 6023 In Real Projects

Where This Grass ZBox Drawer System Fits Best

This Grass Zbox drawer system, identified by manufacturer part 30137-03, belongs to the Grass Zbox Drawer System category, so it is aimed at metal-sided drawer construction rather than loose slides. The 20-1/16 inch length supports medium-depth cabinet drawers, which suits many base cabinet and utility applications. Frameless or face frame application capability lets the same ZBox 6023 drawer slide with 100lb capacity move between European-style cases and face-frame runs, simplifying planning when projects mix both constructions. The drawer side with white epoxy finish presents a neutral light surface inside the drawer, which works in kitchens, baths, or shop storage where a clean appearance is desired. The integrated side mount ball bearing drawer slide and metal drawer side design means the drawer side itself is the structural member, so cabinet builders can work from a defined Grass America system instead of assembling separate slide and side components.

Details That Help Alignment And Repeatable Results

The load capacity of 100 lb means this ball bearing telescopic full extension slide can support typical residential drawer loads, so the drawer action stays within the slide design during normal storage tasks. Continuous bearings that ensure smooth running performance distribute forces through the travel, which supports repeatable opens and closes across a bank of drawers. The hold-in detent that ensures drawers stay closed provides a clear end position, so fronts line up consistently until actively opened. Cam height plus or minus 2 mm lets installers raise or lower the drawer box relative to the runner, which helps correct small drilling or cabinet variations without rebuilding parts. Side adjustment plus or minus 1.5 mm adds lateral tuning, which is useful to align front gaps along stacked drawers. The front slotted hole for face frame mounting offers additional horizontal and vertical play during installation, supporting fine alignment when mounting into wood face frames. A face frame rear mounting bracket available note signals that rear support solutions exist for face-frame cabinets, helping extend this same Grass America configuration across different cabinet depths and layouts. Zargen is made in the USA and ZBox is assembled in the USA, supporting consistent specification control on these metal drawer system components.

Common Questions About The ZBox 6023 Slide

Select This Grass ZBox System For Metal Drawers

The Grass America ZBox 6023 drawer slide with 100lb capacity, full extension travel, and integrated metal drawer side offers a defined approach for metal-sided drawers. With frameless or face frame application, cam height and side adjustment, and a white epoxy drawer side, this ZBox drawer system supports consistent drawer builds. Use the 20-1/16 inch length and ball bearing telescopic full extension design when you want full-depth access and controlled movement from a Grass Zbox Drawer System component.