Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
ZBox 6023 drawer slide defines this Grass Zbox drawer system component as a full extension, integrated side mount ball bearing drawer slide and metal drawer side, so the slide and drawer side function together as one matched assembly. The 21-5/8 inch length stated in the SAP description sets the drawer box depth, which helps installers plan cabinet clearances and standardize box dimensions across a run. The 3-1/2 inch height in the same description establishes drawer side height, affecting storage volume and front panel layout. The load capacity of 100 lb given in the web description supports heavier drawer contents within that rating, which matters for everyday use in cabinetry where tools or supplies are stored. The drawer side white epoxy finish described in the web content provides a consistent, neutral appearance, which helps the system blend with common light interior finishes. The drawer slide zinc coated steel identified in the description supplies a protective metallic surface, supporting the telescopic full extension function over repeated cycles.
The web description confirms the ZBox 6023 drawer slide works for frameless or face frame application, so the same component can be used across different cabinet construction methods, simplifying hardware planning on mixed projects. The front slotted hole for face frame mounting described in the content provides fore-and-aft flexibility at the face frame, which helps align drawer fronts flush with adjacent doors or drawers. A face frame rear mounting bracket is identified as available, giving a defined way to support the cabinet member at the back on face frame cabinets, which helps maintain slide alignment under the 100 lb capacity. The adjustment details listed as cam height plus or minus 2 mm and side plus or minus 1.5 mm give installers fine tuning control in both vertical and lateral directions, which reduces front misalignment and improves the visual consistency of drawer reveals across a bank.
The SAP description stating 21-5/8 inch length and 3-1/2 inch height defines a specific ZBox 6023 drawer slide size, which suits cabinet interiors designed around that drawer depth, helping standardize carcass layouts. The product is listed under Grass ZBOX Drawer Systems and Grass Zbox Drawer System product class, placing it within a coordinated construction system that pairs metal drawer sides with cabinet members for consistent geometry. The web description notes frameless or face frame application, so shops building either style can deploy the same 30138-03 component across different lines, simplifying purchasing and inventory. The white epoxy drawer side finish referenced in the description fits light cabinet interiors, supporting a clean look when drawers are opened. Because the drawer slide portion is zinc coated steel according to the description, it integrates a corrosion-resistant metal surface within the cabinet member, supporting performance where humidity varies in normal woodworking environments.
The identified ball bearing telescopic full extension on the ZBox 6023 drawer slide allows the drawer box to travel out completely, which helps installers verify clearances and adjust drawer fronts without obstruction. The continuous bearings described in the web content distribute movement support across the travel, helping the 100 lb capacity feel controlled when the drawer is fully loaded. The stated hold-in detent, which ensures drawers stay closed, supports consistent front alignment by resisting minor bumps, which matters in commercial or shop installations. The easy lever disconnect mentioned allows the drawer box to be removed from the cabinet member, which simplifies fine adjustment of cam height plus or minus 2 mm and side plus or minus 1.5 mm because the installer can work directly at the hardware. The product being manufactured from cold rolled steel, as specified, helps maintain tight tolerances where the drawer side interfaces with the cabinet member, reducing play that could otherwise complicate repeatable alignment in production runs.
The ZBox 6023 drawer slide is described for frameless or face frame application, so the same system serves both cabinet constructions, simplifying hardware choice when projects mix these styles.
The web description states a 100 lb load capacity, which means the drawer system is rated to carry up to that load while maintaining its full extension and ball bearing performance.
The ZBox 6023 is described as a ball bearing telescopic full extension slide, so the drawer can extend to expose its full 21-5/8 inch length for access and adjustment.
The adjustments listed as cam height plus or minus 2 mm and side plus or minus 1.5 mm allow installers to fine tune front alignment and reveals after mounting the system.
The description states the drawer side has a white epoxy finish and the drawer slide is zinc coated steel manufactured from cold rolled steel, supporting appearance and smooth running.
The web description notes a hold-in detent that ensures drawers stay closed, which helps fronts stay aligned in regular use and reduces unintended opening.
The Grass ZBox drawer system component identified as ZBox 6023 drawer slide with 100 lb capacity, full extension, and 3-3/8 inch designation gives installers a defined hardware choice for metal-sided drawers. The SAP description confirming 21-5/8 inch length and 3-1/2 inch height sets clear planning dimensions for case depth and drawer side height. With frameless or face frame application and face frame-specific mounting features listed in the web description, this 30138-03 part suits shops working across cabinet constructions. For projects needing a coordinated Grass America ZBox solution, this specification-focused drawer slide and side assembly provides consistent geometry for repeatable cabinet runs.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF30102-15 Mfr# 30102-15 | Grass America ZBox Rear Bracket, Zinc, 30102-15 |
