ZBox 6223 Drawer Slide For Metal Box Builds

ZBox 6223 drawer slide gives you an integrated side mount ball bearing drawer slide and metal drawer side, so one system handles both the drawer motion and the box structure on your cabinet jobs. The 13-3/4 inch length and 6 inch height shape the drawer box footprint, which helps you size parts consistently across a run of cabinets. Ball bearing telescopic full extension lets the drawer travel its full length, so stored items are accessible without reaching into a dark cabinet. A hold-in detent keeps drawers closed at the end of travel, which helps drawers stay put in everyday use. The drawer side in white epoxy finish pairs with visible interior cabinetry where a light, clean look matters. The drawer slide in zinc coated steel provides a steel running surface, supporting the 100 lb load capacity for typical residential and light commercial drawer loads.

Key ZBox Features That Support Cabinet Work

• The integrated side mount ball bearing drawer slide and metal drawer side combine motion hardware and side panels, reducing separate parts during drawer construction and simplifying layout.
• Ball bearing telescopic full extension lets the drawer open fully, improving access to stored contents and reducing time spent working around partial extension slides.
• The hold-in detent that ensures drawers stay closed uses end-of-travel resistance, which helps drawers remain shut in normal operation and reduces nuisance openings.
• Easy lever disconnect for removal of drawer box from cabinet member allows the installer to lift the drawer off the slide member, which streamlines fitting, adjustment, and service work.
• Continuous bearings ensure smooth running performance along the slide travel, which supports consistent drawer feel across multiple units on a project.
• The 100 lb load capacity is designed to support typical drawer contents, giving you a defined performance range when planning drawer sizes and contents for residential cabinetry.

Installation And Mounting Details For ZBox 6223

The ZBox 6223 drawer system is manufactured from cold rolled steel, giving the slide and metal drawer sides a strong, uniform base during installation and daily use. Frameless or face frame application support means the same system can be used across European-style and traditional face frame cabinets. The front slotted hole for face frame mounting gives installers adjustment room at the front connection, which helps align the slide with the cabinet opening. A face frame rear mounting bracket is available for this system, adding a mounting point at the rear of face frame cabinets. Cam height adjustment of plus or minus 2 mm on the drawer provides vertical fine-tuning at the front, which helps align drawer faces and reveals. Side adjustment of plus or minus 1.5 mm lets you shift the drawer side-to-side relative to the cabinet, which is useful for dialing in gaps between adjacent drawer fronts.

Using Grass ZBox Drawer System In Projects

Where This Grass ZBox Drawer System Fits Best

This Grass America ZBox 6223 drawer slide with metal drawer side is part of the Grass Zbox Drawer System, so it aligns with drawer construction systems used by cabinet and woodworking shops. The 13-3/4 inch length defines a compact drawer depth well-suited to smaller base cabinets or upper cabinets where shorter drawers are specified. A 6 inch drawer side height creates a medium-height drawer box, fitting common storage such as utensils, small tools, or office items. The white epoxy drawer side finish works in cabinet interiors that use light colors, supporting a uniform appearance when the drawer is opened. Because it is assembled in the USA, the ZBox component leverages domestic assembly for this system. Zargen being made in the USA places this system in the same family of Grass metal drawer products used in many shop-built cabinet lines.

How ZBox Details Support Repeatable Drawer Results

The integrated side mount ball bearing drawer slide and metal drawer side design standardizes the drawer construction, which helps produce consistent drawer geometry from one cabinet to the next. Continuous bearings along the telescopic full extension section provide the same feel over the entire stroke, which supports a uniform user experience across a bank of drawers. The cold rolled steel construction gives both the drawer slide and drawer sides a precise profile, helping the cam height plus or minus 2 mm adjustment work predictably during final alignment. Side adjustment of plus or minus 1.5 mm is built into the system, letting installers correct small cabinet or drawer box variances without reworking parts. The hold-in detent that keeps drawers closed works with the 100 lb capacity slide, providing closure resistance that still allows normal opening force in typical cabinetry. Easy lever disconnect between drawer box and cabinet member supports factory finishing workflows, where drawers are installed after case finishing and can be removed later for service without disturbing cabinet mounts.

Common Questions About ZBox 6223 Drawer System

Selecting This Grass ZBox 30139-03 For Your Build

Grass America ZBox 30139-03 gives you a 13-3/4 inch, 6 inch high metal drawer side and integrated ball bearing slide, ready for full-extension drawers in frameless or face frame cabinets. The cam height and side adjustments support tight, consistent reveals, while the 100 lb capacity fits typical storage loads. When you need a white epoxy metal drawer side with smooth-running telescopic full extension for shop-built cabinets, this ZBox 6223 drawer slide aligns with common drawer construction workflows.