Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 Silentia hinge is built for half overlay doors on face-frame and frameless cabinets, delivering a quiet, damped close in a screw-on nickel-finish package.
Half overlay means the door covers roughly half the cabinet side rather than the full panel edge. That geometry is essential on double-door cabinets where two doors meet on a single center partition: each door needs to step back just enough so the arms do not collide behind the faces. This hinge carries the half-crank arm that makes that layout work. The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted on the cabinet side or stile. The base plate is sold separately and must be matched to your cabinet construction and the Salice Series 100 line.
The hinge body is steel finished in nickel, a neutral tone that reads cleanly against painted cabinetry, light wood interiors, and most standard hardware finishes. Because the hinge is concealed when the door is closed, the finish matters most at the plate and arm during installation and whenever a door is open. The Silentia damping is integrated into the hinge, so there is no separate damper cartridge to source or install. A screw-on mount means a firm mechanical connection that does not depend on pre-bored system holes in the cabinet side.
This is a practical pick for cabinet installers, remodelers, and production shops fitting partial-overlay doors on existing face-frame boxes or frameless carcasses. The screw-on plate method suits retrofit work where system holes are not already in place. Homeowners replacing worn or damaged hinges on a shared-partition double-door layout will find the half-crank geometry matches the original setup. For a full overlay door that covers the entire cabinet side, an overlay hinge is the correct choice instead. For doors over 22mm thick, move to a thick-door hinge sized for that application.
No. The hinge arm connects to a base plate that mounts to the cabinet, and that plate is sold separately. Use a Salice plate matched to your cabinet type and this Series 100 line. Plates from other brands will not connect to this hinge.
Soft-close uses a damper to slow the door over the last few degrees so it closes quietly. Self-close uses a spring to pull the door shut. This hinge is soft-close: it cushions the close rather than pulling the door.
The 105 degree angle is a product of the half-crank arm geometry used for partial overlay. It gives solid everyday access to cabinet contents and is the correct design for this overlay type.
Half overlay hinges work on single doors set to a partial overlay as well as on paired doors sharing a partition. What matters is that the overlay dimension matches your cabinet layout, not whether the door is single or paired.
Specify this hinge when the job calls for partial-overlay doors that close without a sound, on face-frame or frameless cabinets, with a finish that holds its look across the life of the installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2XX86BT Mfr# S2XX86BT | Silentia Hinge Spacers 0.6mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBS2XX86AT Mfr# S2XX86AT | 1.2mm Spacer for Silentia Series Hinges | ||||
Sold in: 1 Each |  UBS2XX86KT Mfr# S2XX86KT | Silentia Hinge Spacers 1.8mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBD1A6ACGSN Mfr# D9A6AC3SN | Silentia Hinge Cup Depth Gauge 12 mm | ||||
Sold in: 1 Each |  UBD2ABACGSN Mfr# D2ABACGSN | Silentia Hinge Cup Depth Gauge 15.5 mm | ||||
Sold in: 1 Each |  UBS1E637XY Mfr# S1E637XY | Salice Series 100 & 700 Hinge Stop Device S1E637XY |