Cup pull satin nickel from the Bridges collection by Hickory Hardware provides a cup-style drawer pull with crisp edges and strong lines, which supports a clean, architectural look on cabinet drawers where consistent visual alignment matters. The Belwith Keeler branding ties this pull into a broader decorative hardware line, helping projects that aim to keep a unified handle style across multiple cabinets or rooms. The satin nickel finish gives the zinc material a muted metallic tone, which works well on jobs calling for a modern but not high-gloss appearance. With a center-to-center range of 3 to 3-1/4 inches, this pull fits drawer fronts drilled within that spread, which is useful for layouts where existing holes are slightly varied. The overall design suits both long-awaited renovation projects and new cabinet drawer installations where a defined bridge-style profile is desired.
This Bridges collection cup pull uses a center-to-center range of 3 to 3-1/4 inches, which means it can align with drawer fronts that have hole pairs within that spacing band. That flexibility helps when working with existing cabinets where drilled centers vary slightly between fronts. On new work, the 3 inch starting point aligns with a common drilling pattern, while the 3-1/4 inch upper end provides another layout option when spacing needs to shift slightly for design reasons. Because the overall length is 5-7/8 inches, there is visual margin beyond the screw points, which supports more forgiving placement on wider fronts. The 11/16 inch projection keeps the handhold close to the face, which matters around tight clearances such as galley runs or adjacent doors.
The Bridges collection cup pull by Hickory Hardware is positioned for cabinet drawer use, supported by its classification under decorative handles and pulls with a cup-style profile. Its 3 to 3-1/4 inch center-to-center dimension places it in the range often used for kitchen, bath, or built-in drawers that favor smaller mounting spreads. The 5-7/8 inch total length allows this pull to sit comfortably on both narrow and moderate-width drawer fronts, which helps maintain proportion when repeating the hardware across a bank of cabinets. With a width of 1-13/16 inches, the pull occupies a moderate vertical band on the drawer face, which suits drawer stacks where consistent vertical spacing is planned between fronts.
The zinc material and satin nickel finish of this Belwith Keeler cup pull give a consistent metal surface that supports uniform appearance across multiple units on the same project. The 11/16 inch projection defines a repeatable standoff from the drawer face, which is important when aligning several pulls in a straight run so the hand-feel and clearance remain the same. The 3 to 3-1/4 inch center-to-center range allows installers to match existing drilling that falls within that band, helping reface or retrofit jobs keep current hole locations while upgrading the visual style. The Bridges collection name and bridge-inspired geometry introduce crisp edges and strong lines, which help tie together design schemes that emphasize structure and alignment across all visible hardware.
The Bridges satin nickel cup pull is positioned for cabinet drawers, using its cup profile and decorative handle classification to give drawers a structured, architectural look on kitchens, baths, or built-ins.
The 3 to 3-1/4 inch center spacing lets the pull align with drawer fronts drilled within that range, which is useful on retrofits or layouts with slightly varied hole distances.
The 5-7/8 inch overall length means the pull spans more of the drawer face, which helps visually balance wider drawers and keeps multiple pulls looking consistent in a row.
The 11/16 inch projection sets how far the pull stands off the drawer, affecting finger clearance while keeping the pull relatively low-profile in tight walkways or close cabinet runs.
The satin nickel finish gives the zinc pull a soft metallic appearance, which helps it coordinate with other satin nickel decorative hardware used on the same cabinets.
Belwith Keeler branding identifies this pull within a recognized decorative hardware family, supporting coordinated hardware selections across a larger cabinet or millwork project.
The P3234-SN Bridges collection cup pull by Belwith Keeler combines a zinc body, satin nickel finish, and a 3 to 3-1/4 inch center-to-center range to serve cabinet drawer projects needing that specific spread. Its 5-7/8 inch length, 1-13/16 inch width, and 11/16 inch projection provide defined dimensions that support repeatable layouts across drawer banks. For projects targeting a structural, bridge-inspired style on drawers with this center spacing, this satin nickel cup pull offers a clearly specified option ready to match that requirement.
Sold In: 1 Each
