Hickory Hardware Bridges pull gives a cabinet or drawer a defined architectural look, using the Bridges collection design with crisp edges and strong lines. This pull is built as a decorative handle for new cabinet drawers or a long-awaited remodel, so it works as a visible finishing detail on face frames. Made from zinc, the pull provides a metal body that supports everyday opening and closing. The oil rubbed bronze highlighted finish delivers a dark tone with highlighted areas, adding visual depth where the hand grips and along the edges. With a center to center of 3-3/4 inches (96 mm), it aligns with drilling patterns that follow this common pull spacing on cabinetry. Overall length of 4-7/16 inches gives enough hand clearance across the drawer front, while the 1-1/8 inch projection sets the pull out from the surface for fingers to grab cleanly.
The center to center of 96 mm (3-3/4 inches) on this P3232-OBH pull sets the distance between mounting points, so hole drilling follows that fixed spacing during layout. This measurement matches a widely used pull size, which supports consistent alignment across banks of doors and drawers in a run. The 4-7/16 inch overall length leaves slight overhang beyond the screw locations, letting the pull visually balance on standard drawer rail widths. With a projection of 1-1/8 inch, the handle stands off enough from the door or drawer surface to grip without hand contact on the face, useful on thicker fronts. The 11/16 inch width defines how much vertical space the pull covers, helping plan its position on narrow stiles or rails so lines stay consistent at eye level.
The Bridges collection design on this P3232-OBH pull suits cabinet drawers and doors where a straight, architectural profile is wanted. In runs of base cabinets, the 3-3/4 inch (96 mm) center to center dimension lets multiple pulls line up evenly across drawers, which keeps sightlines clean along countertops. On upper cabinets, the oil rubbed bronze highlighted finish creates a dark, defined grip point that stands out against lighter door finishes, supporting quick hand placement. The 4-7/16 inch length works on both smaller bath vanity fronts and wider kitchen drawers, so installers can use the same pull style across several cabinet sizes. Because the pull is classified as decorative hardware in handles and pulls, it functions as a visible hardware choice rather than a concealed part, making its styling relevant wherever the hardware remains in view.
The 96 mm center to center measurement on this Hickory Hardware Bridges pull gives installers a fixed drilling standard, which simplifies jig setup for repetitive cabinet runs. Keeping that spacing across all fronts helps avoid layout adjustments from one cabinet to another, saving setup time. The 1-1/8 inch projection defines how far the pull stands out, which supports comfortable access even when drawers are loaded, because fingers find a consistent gap behind the handle. Width of 11/16 inch narrows the pull footprint, so it can be positioned on slim rails without crowding panel details, useful on more detailed door profiles. Zinc construction delivers a solid metal base that maintains the pull shape when used repeatedly, supporting hardware alignment across the life of the installation. The oil rubbed bronze highlighted finish visually ties together multiple hardware points on doors and drawers, so once an installer commits to this finish, the same look can be carried throughout the project for a unified cabinet appearance.
The Hickory Hardware Bridges pull has a 3-3/4 inch (96 mm) center to center, so mounting holes are drilled at that spacing for consistent cabinet and drawer layouts.
The P3232-OBH pull length is 4-7/16 inches, which provides coverage across typical drawer rails while keeping some edge reveal for balanced cabinet proportions.
The Bridges collection pull is made from zinc, providing a metal construction that supports everyday cabinet and drawer use without changing its basic handle shape.
This Bridges pull uses an oil rubbed bronze highlighted finish, giving a dark bronze appearance with highlighted accents that stand out against many cabinet finishes.
The P3232-OBH pull projects 1-1/8 inch from the surface, creating space behind the handle so fingers can grip without rubbing the cabinet face.
This cabinet pull has a width of 11/16 inch, helping it fit on narrow rails or stiles while still presenting a clear, defined grip area on doors and drawers.
This Hickory Hardware Bridges pull, model P3232-OBH from Belwith Keeler, combines a 3-3/4 inch (96 mm) center to center with a 4-7/16 inch length, so it suits many cabinet and drawer sizes. The zinc construction and oil rubbed bronze highlighted finish provide a defined, architectural look that matches decorative hardware and moldings projects. For jobs calling for consistent 96 mm pull spacing and a dark highlighted finish across doors and drawers, this Bridges collection pull offers a unified choice for cabinet hardware layouts.
Sold In: 1 Each
