Hickory Hardware Bridges pull gives cabinet doors and drawers a strong, architectural look using the Bridges collection design. The zinc material creates a solid cabinet pull that supports everyday opening and closing in kitchens, baths, and built-ins. The 8-13/16 inch (224 mm) center to center layout spans wider drawer fronts so the hand lands naturally near the middle of the load. The 9-9/16 inch overall length visually anchors long doors and panels, tying multiple fronts into a consistent line. The oil rubbed bronze highlighted finish brings dark tone with lighter edges, which helps the pull stand out against both light and medium cabinetry. The 3/4 inch width presents a slim profile that still gives enough surface for a stable grip when hands are wet or busy. A 1-5/16 inch projection holds fingers clear of the door face, helping keep finished fronts cleaner in regular traffic.
The 224 mm center to center drilling pattern sets a fixed distance between fasteners, which is useful when laying out new fronts or matching an existing Bridges collection run. Because the pull length is 9-9/16 inches, there is predictable overhang past each hole, helping installers align the pull vertically and horizontally relative to stiles and rails. The 1-5/16 inch projection defines how far the pull sits off the surface, giving planners a known clearance around adjacent walls, appliances, and trim. With a width of 3/4 inch, the pull occupies a narrow band across the face, which helps when placing it on narrower frame members. The oil rubbed bronze highlighted finish keeps the appearance consistent across multiple units, supporting clean visual lines when used on full kitchens or built-in projects.
The P3237-OBH Bridges collection pull suits new cabinet drawers and cabinet doors where a long, linear handle is preferred. The 8-13/16 inch center to center mounting dimension pairs well with wider drawer fronts often used in base cabinets, islands, and hutches. On tall doors, the 9-9/16 inch overall length offers enough span for a comfortable hand position at various heights. The zinc material gives a unified feel across every pull in a job, which matters on large installations where mixed weights can be distracting. The oil rubbed bronze highlighted finish coordinates with other dark metals in hinges or faucets, simplifying finish schedules for designers and installers working through a full room plan. Because this pull belongs to the Bridges collection by Hickory Hardware, using it across a project creates a consistent architectural theme from base cabinets up to wall units.
The fixed 224 mm center to center dimension allows jigs and drilling templates to be set once and reused across all doors and drawers using this pull, saving layout time on repetitive cabinet runs. The strong, crisp line geometry gives a clear visual cue when sighting down a bank of cabinets, so small alignment shifts are easier to catch before final tightening. With a 1-5/16 inch projection, the hand clears the cabinet face predictably, reducing smudging at high-touch points like sink bases and trash pullouts. The 3/4 inch width keeps the pull from crowding narrow rails, which helps maintain proper edge distances on more delicate fronts. The overall 9-9/16 inch length distributes pulling force over a broader area of the front, beneficial on wide, loaded drawers that see repeated use throughout the day.
The P3237-OBH Bridges pull has a 224 mm, or 8-13/16 inch, center to center distance, which helps standardize drilling for wide drawers and doors.
The Bridges collection pull measures 9-9/16 inches in overall length, giving broad coverage across wider cabinet fronts for comfortable gripping.
The P3237-OBH pull is made from zinc, providing a solid feel at the hand and consistent weight across multiple pulls in a project.
This Bridges collection pull projects 1-5/16 inches from the cabinet surface, allowing fingers to clear the door or drawer face during use.
The P3237-OBH uses an oil rubbed bronze highlighted finish, giving a dark base tone with highlighted edges that show the pull profile.
The Bridges pull is 3/4 inch wide, creating a slim profile while still offering adequate surface area for a steady grip.
The Hickory Hardware Bridges pull P3237-OBH combines a 224 mm center to center layout with a 9-9/16 inch length to handle wider drawers and tall doors in one pattern. The zinc construction and 1-5/16 inch projection support everyday cabinet use, while the oil rubbed bronze highlighted finish brings a unified look across full kitchen, bath, or built-in installations. For projects that call for a consistent Bridges collection line from Belwith Keeler decorative handles and pulls, this model offers a defined size and finish you can match across the entire run.
Sold In: 1 Each
