Hickory Hardware Bridges Series pull gives a cabinet or drawer a defined, architectural look using the crisp edges and strong lines described for this design. The Bridges collection identity ties this pull to that family, which helps match existing Bridges pieces across a job. The 3 inch center to center dimension sets a clear drill pattern for new work or swap-out replacements on doors and drawers drilled on that spacing. The chrome finish creates a bright, reflective surface that coordinates with other chrome hardware on cabinets. The zinc material provides a solid metal body for the pull, which supports everyday opening and closing of doors and drawers. The 3-5/8 inch overall length establishes the hand grip span on the face of the cabinet, affecting how it feels to grab with one or more fingers.
The 3 inch center to center drilling on this pull sets a precise distance between fasteners, which guides boring jigs and CNC programs on cabinet doors and drawer fronts. The 3-5/8 inch overall length means the pull extends slightly past the mounting holes at each end, which affects edge clearances when working near stile or drawer edges. The 1-1/8 inch projection defines how far the pull stands out from the surface, giving space for fingers without pushing too far into walkways around cabinetry. The 11/16 inch width keeps the footprint narrow across the rail or drawer front, which helps when aligning several pulls in tight vertical stacks. The chrome finish on zinc material combines a bright surface with a metal substrate, making the pull suit decorative hardware layouts on both doors and drawers.
The product name Hickory Hardware Bridges Series 3 inch (76 mm) center to center chrome pull identifies this piece as a cabinet hardware pull for doors or drawers set on that bore spacing. The Bridges collection reference positions it alongside other Bridges items when a job calls for a unified decorative hardware theme across a kitchen, bath, or built-in. The 3 inch center to center measurement matches a common drilling standard, so it fits layouts that rely on that spacing across multiple cabinet runs. The 3-5/8 inch overall length gives visual presence without spanning too wide, which suits typical face frame rails and full-overlay drawer fronts. The zinc material with chrome finish supports decorative hardware use on cabinets where a bright, architectural look is desired.
The 3 inch center to center drill dimension creates a predictable template for jigs, allowing repeated boring of doors and drawers with consistent alignment from cabinet to cabinet. The 3-5/8 inch length or diameter value helps designers and installers visualize how much of the drawer or door rail the pull will occupy, which supports balanced placement when combining with knobs or other pulls. The 1-1/8 inch projection number defines stand-off from the face, so clearances can be planned between pull and adjacent cabinet doors, walls, or appliance panels. The 11/16 inch width figure indicates a relatively slim face band, allowing multiple pulls to sit close on narrow drawer banks without crowding. The Chrome finish on a zinc base ties both look and material back to the Bridges collection, supporting consistent decorative hardware specification on a project.
The Hickory Hardware Bridges Series pull uses a 3 inch center to center drilling pattern, which sets the distance between mounting holes for cabinet doors and drawer fronts.
The P3231-CH cabinet pull has a 3-5/8 inch overall length, which defines its span across the cabinet face and helps with proportion on doors and drawers.
The chrome cabinet pull has a 1-1/8 inch projection, giving space between the pull and cabinet surface for fingers when opening doors or drawers.
The Bridges collection drawer pull is 11/16 inch wide, which affects its visual thickness on the cabinet face and the contact area under the fingers.
The P3231-CH pull is made from zinc with a chrome finish, providing a metal body with a bright surface suitable for decorative cabinet hardware.
This 3 inch chrome pull is from Belwith Keeler under the Hickory Hardware Bridges collection, aligning it with other Bridges decorative hardware pieces.
The Hickory Hardware Bridges Series pull with 3 inch center to center drilling, 3-5/8 inch overall length, and 1-1/8 inch projection offers defined dimensions for cabinet layouts. The zinc construction with chrome finish and Bridges collection styling supports coordinated hardware across doors and drawers. When a project calls for a 3 inch center to center chrome pull that matches the Bridges look, this P3231-CH model from Belwith Keeler provides a clearly specified option for planning and execution.
Sold In: 1 Each
