Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PULL 160MM C/C Satin Nickel describes a Bridges collection pull from Hickory Hardware designed for cabinet doors or drawers, so it gives a consistent look across a run of casework. The 6-5/16 inch (160 mm) center to center drilling matches standard long-pull layouts, which helps align this piece with existing hole patterns on many cabinets. The overall 7-1/16 inch length covers a broader fascia area, so old marks around previous pulls stay hidden on many refacing projects. A 1-3/16 inch projection defines how far the pull stands off the front, giving comfortable finger clearance while keeping the hardware close to the face to limit snag points in busy shops or kitchens. The 3/4 inch width provides a slim visual profile, so banks of drawers read clean and linear. The satin nickel finish gives a subdued metallic appearance that suits contemporary and transitional cabinet designs.
This Bridges series pull uses a 6-5/16 inch (160 mm) center to center dimension, which sets the drilling distance between mounting holes for layout and boring operations. The 7-1/16 inch overall length then establishes how much of the cabinet face the pull visually occupies, allowing installers to balance hardware scale with door or drawer size. A 1-3/16 inch projection defines stand-off from the surface, so drawers can be gripped without knuckles hitting the face during opening. The 3/4 inch width keeps the handle narrow, leaving more visible panel around the pull on slim rails and stiles. These fixed dimensions give installers predictable layout results when repeating the same pull across long cabinet runs, banks of drawers, or tall doors.
The Bridges series P3235-SN pull from Hickory Hardware, with its 7-1/16 inch length, suits medium to large cabinet doors and drawers where a longer grip looks balanced. The 6-5/16 inch (160 mm) center to center drilling aligns well with common extended-pull drilling jigs, so installers can repeat hole patterns accurately from cabinet to cabinet. Its 3/4 inch width keeps the profile slim, which works well on narrow rails or contemporary slab fronts where excessive bulk would dominate the panel. The 1-3/16 inch projection puts the gripping surface comfortably off the face, giving room for fingers even on thicker door fronts. The satin nickel finish coordinates with other satin nickel decorative hardware and fixtures, helping hardware lines stay consistent across kitchens, baths, or office cabinetry. With crisp edges and strong lines, the Bridges design visually pairs with square-edge doors, flat drawer fronts, and linear trim details.
The fixed 160 mm center to center spacing on the PULL 160MM C/C Satin Nickel pull simplifies repetitive drilling when installing long rows of handles. Installers can set a boring jig to 6-5/16 inch centers once and carry that setup through entire cabinet runs, which keeps handles aligned and speeds production work. The 7-1/16 inch overall length gives a known coverage zone around the holes, so door and drawer fronts can be planned with enough rail width to frame the pull properly. Because the projection is set at 1-3/16 inch, designers can anticipate how far hardware will extend into walkways or tight galley spaces. The 3/4 inch wide grip helps maintain even reveals between adjacent pulls on narrow drawer stacks, keeping lines clean. The zinc material body provides a consistent substrate under the satin nickel finish, so the visual appearance remains uniform from piece to piece on large projects.
The P3235-SN pull uses a 6-5/16 inch (160 mm) center to center drilling, which sets a standard distance between mounting holes for cabinet doors and drawers.
The Hickory Hardware Bridges P3235-SN pull has an overall length of 7-1/16 inch, giving it a longer visual footprint suited to medium and large cabinet fronts.
The PULL 160MM C/C Satin Nickel pull projects 1-3/16 inch from the cabinet face, providing room for fingers while keeping the handle close to the door or drawer front.
The Bridges collection satin nickel pull is 3/4 inch wide, giving a slim grip that works well on narrow rails and modern slab cabinet fronts.
The P3235-SN cabinet pull is made from zinc, providing a solid metal handle body for regular use on cabinet doors and drawers.
The Hickory Hardware Bridges P3235-SN pull has a satin nickel finish, giving a muted metallic look that suits contemporary and transitional cabinet styles.
The Bridges series P3235-SN pull from Belwith Keeler and Hickory Hardware combines a 6-5/16 inch (160 mm) center to center drilling with a 7-1/16 inch overall length, so it suits many standard cabinet layouts. Its zinc construction and satin nickel finish provide a metal pull with a contemporary look that matches modern casework. For projects that call for a slim 3/4 inch wide handle with a 1-3/16 inch projection, this PULL 160MM C/C Satin Nickel model offers a defined set of dimensions to build into cabinet design and installation plans.
Sold In: 1 Each
